Update board environment to match the one used in deployment.
Signed-off-by: Marek Vasut marex@denx.de Cc: Silvio Fricke silvio.fricke@softing.com Cc: Simon Goldschmidt simon.k.r.goldschmidt@gmail.com --- include/configs/socfpga_vining_fpga.h | 111 ++++++++++++++++++++------ 1 file changed, 87 insertions(+), 24 deletions(-)
diff --git a/include/configs/socfpga_vining_fpga.h b/include/configs/socfpga_vining_fpga.h index cdca65ae95..73a8244269 100644 --- a/include/configs/socfpga_vining_fpga.h +++ b/include/configs/socfpga_vining_fpga.h @@ -11,8 +11,9 @@ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on VINING_FPGA */
/* Booting Linux */ -#define CONFIG_BOOTFILE "openwrt-socfpga-socfpga_cyclone5_vining_fpga-fit-uImage.itb" +#define CONFIG_BOOTFILE "fitImage" #define CONFIG_BOOTCOMMAND "run selboot" +#define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MiB */ #define CONFIG_LOADADDR 0x01000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
@@ -30,8 +31,11 @@ * B: GPIO 78 ... the button between USB A ports * * The logic: - * if button B is not pressed, boot normal Linux system immediatelly - * if button B is pressed, wait $bootdelay and boot recovery system + * if button B is pressed, boot recovery system after 10 seconds + * if force_boottype is set, boot system depending on the value in the + * $force_boottype variable after 1 second + * if button B is not pressed and force_boottype is not set, boot normal + * Linux system after 5 seconds */ #define CONFIG_PREBOOT \ "setenv hostname vining-${unit_serial} ; " \ @@ -39,6 +43,11 @@ "if gpio input 78 ; then " \ "setenv bootdelay 10 ; " \ "setenv boottype rcvr ; " \ + "elif test -n "$force_boottype" ; then " \ + "setenv bootdelay 1 ; " \ + "setenv boottype "$force_boottype" ; "\ + "setenv force_boottype ; " \ + "saveenv ; " \ "else " \ "setenv bootdelay 5 ; " \ "setenv boottype norm ; " \ @@ -51,21 +60,36 @@ "bootscript=boot.scr\0" \ "ubimtdnr=5\0" \ "ubimtd=rootfs\0" \ - "ubipart=ubi0:rootfs\0" \ + "ubipart=ubi0:vining-fpga-rootfs\0" \ "ubisfcs=1\0" /* Default is flash at CS#1 */ \ "netdev=eth0\0" \ - "hostname=vining_fpga\0" \ + "hostname=vining_fpga\0" \ "kernel_addr_r=0x10000000\0" \ - "mtdparts_0=ff705000.spi.0:" \ + "fdt_addr_r=0x20000000\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "dfu_alt_info=qspi0 sf 0:0;qspi1 sf 0:1\0" \ + "mtdparts_0_16m=ff705000.spi.0:" /* 16MiB+128MiB SF config */ \ "1m(u-boot)," \ "64k(env1)," \ "64k(env2)," \ "256k(softing1)," \ "256k(softing2)," \ "-(rcvrfs)\0" /* Recovery */ \ - "mtdparts_1=ff705000.spi.1:" \ - "32m(rootfs)," \ + "mtdparts_0_256m=ff705000.spi.0:" /* 256MiB(+256MiB) config */ \ + "1m(u-boot)," \ + "64k(env1)," \ + "64k(env2)," \ + "256k(softing1)," \ + "256k(softing2)," \ + "14720k(rcvrfs)," /* Recovery */ \ + "64m(rootfs)," /* Root */ \ + "-(userfs)\0" /* User */ \ + "mtdparts_1_128m=ff705000.spi.1:" /* 16MiB+128MiB SF config */ \ + "64m(rootfs)," \ "-(userfs)\0" \ + "mtdparts_1_256m=ff705000.spi.1:" /* 256MiB+256MiB SF config */ \ + "-(userfs2)\0" \ "update_filename=u-boot-with-spl-dtb.sfp\0" \ "update_qspi_offset=0x0\0" \ "update_qspi=" /* Update the QSPI firmware */ \ @@ -74,6 +98,23 @@ "sf update ${loadaddr} ${update_qspi_offset} ${filesize} ; " \ "fi ; " \ "fi\0" \ + "sf_identify=" \ + "setenv sf_size_0 ; setenv sf_size_1 ; " \ + "sf probe 0:0 && setenv sf_size_0 ${sf_size} ; " \ + "sf probe 0:1 && setenv sf_size_1 ${sf_size} ; " \ + "if test -z "${sf_size_1}" ; then " \ + /* 1x256MiB SF */ \ + "setenv mtdparts_0 ${mtdparts_0_256m} ; " \ + "setenv mtdparts_1 ; " \ + "elif test "${sf_size_0}" = "1000000" ; then " \ + /* 16MiB+128MiB SF */ \ + "setenv mtdparts_0 ${mtdparts_0_16m} ; " \ + "setenv mtdparts_1 ${mtdparts_1_128m} ; " \ + "else " \ + /* 256MiB+256MiB SF */ \ + "setenv mtdparts_0 ${mtdparts_0_256m} ; " \ + "setenv mtdparts_1 ${mtdparts_1_256m} ; " \ + "fi\0" \ "fpga_filename=output_file.rbf\0" \ "load_fpga=" /* Load FPGA bitstream */ \ "if tftp ${fpga_filename} ; then " \ @@ -90,7 +131,11 @@ "addmisc=" \ "setenv bootargs ${bootargs} ${miscargs}\0" \ "addmtd=" \ - "setenv mtdparts "${mtdparts_0};${mtdparts_1}" ; " \ + "if test -z "${sf_size_1}" ; then " \ + "setenv mtdparts "${mtdparts_0}" ; " \ + "else " \ + "setenv mtdparts "${mtdparts_0};${mtdparts_1}" ; " \ + "fi ; " \ "setenv bootargs ${bootargs} mtdparts=${mtdparts}\0" \ "addargs=run addcons addmtd addmisc\0" \ "ubiload=" \ @@ -112,29 +157,47 @@ "setenv ubimtdnr 5 ; " \ "setenv mtdparts mtdparts=${mtdparts_0} ; " \ "setenv mtdids nor0=ff705000.spi.0 ; " \ - "setenv ubipart ubi0:rootfs ; " \ + "setenv ubipart ubi0:vining-fpga-rootfs ; " \ "else " \ - "setenv ubisfcs 1 ; " \ - "setenv ubimtd rootfs ; " \ - "setenv ubimtdnr 6 ; " \ - "setenv mtdparts mtdparts=${mtdparts_1} ; " \ - "setenv mtdids nor0=ff705000.spi.1 ; " \ - "setenv ubipart ubi0:rootfs ; " \ + "if test "${sf_size_0}" = "1000000" ; then "\ + /* 16MiB+128MiB SF */ \ + "setenv ubisfcs 1 ; " \ + "setenv ubimtd rootfs ; " \ + "setenv ubimtdnr 6 ; " \ + "setenv mtdparts mtdparts=${mtdparts_1} ; " \ + "setenv mtdids nor0=ff705000.spi.1 ; " \ + "setenv ubipart ubi0:vining-fpga-rootfs ; " \ + "else " \ + /* 256MiB(+256MiB) SF */ \ + "setenv ubisfcs 0 ; " \ + "setenv ubimtd rootfs ; " \ + "setenv ubimtdnr 6 ; " \ + "setenv mtdparts mtdparts=${mtdparts_0} ; " \ + "setenv mtdids nor0=ff705000.spi.0 ; " \ + "setenv ubipart ubi0:vining-fpga-rootfs ; " \ + "fi ; " \ "fi ; " \ "sf probe 0:${ubisfcs}\0" \ + "boot_kernel=" \ + "if test -z "${sf_size_1}" ; then " /* 1x256MiB SF */ \ + "imxtract ${kernel_addr_r} fdt@1 ${fdt_addr_r} && " \ + "fdt addr ${fdt_addr_r} && " \ + "fdt resize && " \ + "fdt set /soc/spi@ff705000/n25q00@1 status disabled && " \ + "bootm ${kernel_addr_r}:kernel@1 - ${fdt_addr_r} ; " \ + "else " \ + "bootm ${kernel_addr_r} ; " \ + "fi\0" \ "ubi_ubi=" \ - "run ubi_sfsel ubiload ubiargs addargs ; " \ - "bootm ${kernel_addr_r}\0" \ + "run ubi_sfsel ubiload ubiargs addargs boot_kernel\0" \ "ubi_nfs=" \ - "run ubiload nfsargs addip addargs ; " \ - "bootm ${kernel_addr_r}\0" \ + "run ubiload nfsargs addip addargs boot_kernel\0" \ "net_ubi=" \ - "run netload ubiargs addargs ; " \ - "bootm ${kernel_addr_r}\0" \ + "run netload ubiargs addargs boot_kernel\0" \ "net_nfs=" \ - "run netload nfsargs addip addargs ; " \ - "bootm ${kernel_addr_r}\0" \ + "run netload nfsargs addip addargs boot_kernel\0" \ "selboot=" /* Select from where to boot. */ \ + "run sf_identify ; " \ "if test "${bootmode}" = "qspi" ; then " \ "led all off ; " \ "if test "${boottype}" = "rcvr" ; then " \