Hi,
just for the note because there is an open comment and I applied it:
On 16.06.21 05:17, Tom Rini wrote:
On Tue, Jun 15, 2021 at 08:38:38PM -0300, Fabio Estevam wrote:
On the Yocto image there is a single partition and the kernel and dtb are present in the 'boot' directory.
Change it accordingly so that the board can boot the Yocto image by default.
Use the generic 'load' command instead, which is able to read from an ext4 partition.
Signed-off-by: Fabio Estevam festevam@denx.de
include/configs/smegw01.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/include/configs/smegw01.h b/include/configs/smegw01.h index 50f00136ac46..a92c583c8669 100644 --- a/include/configs/smegw01.h +++ b/include/configs/smegw01.h @@ -29,11 +29,11 @@ "bootm_size=0x10000000\0" \ "mmcdev=0\0" \ "mmcpart=1\0" \
- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
- "mmcroot=/dev/mmcblk0p1 rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \
- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \
- "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${image}\0" \
- "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} boot/${fdtfile}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "if run loadfdt; then " \
Shouldn't this be using the generic distro boot and then generating an extlinux.conf in OE? Thanks!
This is not an evaluation board but a customer's project with strict rules about environment (secure boot is required) and with a short list of variable that can be modified (from both U-Boot and user space). A generic distro boot is then unwanted, and just a few set of variables are allowed in this project. An extlinux.conf is not allowed. So I merged it, I have not ignored the comment, I had to answer before, sorry for that.
Best regards, Stefano