On 09/27/2017 06:13 PM, Masahiro Yamada wrote:
2017-09-28 0:50 GMT+09:00 Marek Vasut marek.vasut@gmail.com:
On 09/27/2017 05:19 PM, Masahiro Yamada wrote:
2017-09-26 16:41 GMT+09:00 Jaehoon Chung jh80.chung@samsung.com:
Hi Marek,
On 09/26/2017 01:47 AM, Marek Vasut wrote:
On 09/15/2017 09:10 PM, Marek Vasut wrote:
Add initial support for setting the vqmmc regulator. Since we do not support 1V8 modes, set the regulator to 3V3 and enable it.
Signed-off-by: Marek Vasut marek.vasut+renesas@gmail.com Cc: Masahiro Yamada yamada.masahiro@socionext.com Cc: Jaehoon Chung jh80.chung@samsung.com
Anything ?! I don't see this in the PR ...
Sorry...I missed this patch..First, i have checked on patchwork. Will pick this patch into u-boot-mmc.
Best Regards, Jaehoon Chung
UniPhier SoCs have different mechanism for 3.3/1.8 switching, but it is not a problem for me because I do not have a plan for enabling CONFIG_DM_REGULATOR.
Acked-by: Masahiro Yamada yamada.masahiro@socionext.com
Cool, thanks!
Is there a documentation for the uniphier mechanism somewhere ?
No document available.
I hope that new 96borad will have documentation available, *ahem* :-)
Only crappy private documents.
They say SoC spec books are CONFIDENTIAL!! Sigh.
OK, I'll keep in mind there's a uniphier-specific way to toggle the 1V8 when adding HS200 support, so you can fill that in when you have time.
Thanks!