Add support for the Rockchip serial device using the ns16550 driver. This uses driver model and device tree for both SPL and U-Boot proper.
Signed-off-by: Simon Glass sjg@chromium.org ---
drivers/serial/Kconfig | 9 +++++++++ drivers/serial/Makefile | 1 + drivers/serial/serial_rockchip.c | 41 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 51 insertions(+) create mode 100644 drivers/serial/serial_rockchip.c
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 54e6f26..2e87199 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -76,6 +76,15 @@ config DEBUG_UART_SHIFT value. Use this value to specify the shift to use, where 0=byte registers, 2=32-bit word registers, etc.
+config ROCKCHIP_SERIAL + bool "Rockchip on-chip UART support" + depends on ARCH_UNIPHIER && DM_SERIAL + help + Select this to enable a debug UART for Rockchip devices. This uses + the ns16550 driver. You will need to #define CONFIG_SYS_NS16550 in + your board config header. The clock input is automatically set to + use the oscillator (24MHz). + config UNIPHIER_SERIAL bool "UniPhier on-chip UART support" depends on ARCH_UNIPHIER && DM_SERIAL diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index b385852..434d7fc 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_ZYNQ_SERIAL) += serial_zynq.o obj-$(CONFIG_BFIN_SERIAL) += serial_bfin.o obj-$(CONFIG_FSL_LPUART) += serial_lpuart.o obj-$(CONFIG_MXS_AUART) += mxs_auart.o +obj-$(CONFIG_ROCKCHIP_SERIAL) += serial_rockchip.o obj-$(CONFIG_ARC_SERIAL) += serial_arc.o obj-$(CONFIG_TEGRA_SERIAL) += serial_tegra.o obj-$(CONFIG_UNIPHIER_SERIAL) += serial_uniphier.o diff --git a/drivers/serial/serial_rockchip.c b/drivers/serial/serial_rockchip.c new file mode 100644 index 0000000..319e350 --- /dev/null +++ b/drivers/serial/serial_rockchip.c @@ -0,0 +1,41 @@ +/* + * Copyright (c) 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <ns16550.h> +#include <serial.h> +#include <asm/arch/clock.h> + +static const struct udevice_id rockchip_serial_ids[] = { + { .compatible = "rockchip,rk3288-uart" }, + { } +}; + +static int rockchip_serial_ofdata_to_platdata(struct udevice *dev) +{ + struct ns16550_platdata *plat = dev_get_platdata(dev); + int ret; + + ret = ns16550_serial_ofdata_to_platdata(dev); + if (ret) + return ret; + plat->clock = OSC_HZ; + + return 0; +} + +U_BOOT_DRIVER(serial_ns16550) = { + .name = "serial_rockchip", + .id = UCLASS_SERIAL, + .of_match = rockchip_serial_ids, + .ofdata_to_platdata = rockchip_serial_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct ns16550_platdata), + .priv_auto_alloc_size = sizeof(struct NS16550), + .probe = ns16550_serial_probe, + .ops = &ns16550_serial_ops, + .flags = DM_FLAG_PRE_RELOC, +};