This patch makes the 2nd DRAM bank available on Juno only and not on other vexpress64 targets, eg. the FVP models.
The commit below added a 2nd bank of NOR flash for Juno, but also for all vexpress64 targets:
commit 2d0cee1ca2b9d977fa3214896bb2e30cfec77059 Author: Liviu Dudau Liviu.Dudau@foss.arm.com Date: Mon Oct 19 11:08:31 2015 +0100
vexpress64: Juno: Declare all 8GB of RAM and make them visible to the kernel.
Juno comes with 8GB RAM, but U-Boot only passes 2GB to the kernel. Declare a secondary memory bank and set the sizes correctly.
Signed-off-by: Liviu Dudau Liviu.Dudau@foss.arm.com Reviewed-by: Linus Walleij linus.walleij@linaro.org Reviewed-by: Ryan Harkin ryan.harkin@linaro.org Tested-by: Ryan Harkin ryan.harkin@linaro.org
Unfortunately, I only fully tested on Juno R0, R1 and the FVP Foundation model. Whilst FVP Base AEMV8 models run U-Boot OK, they fail to boot the kernel.
Signed-off-by: Ryan Harkin ryan.harkin@linaro.org Acked-by: Liviu Dudau liviu.dudau@foss.arm.com Reviewed-by: Linus Walleij linus.walleij@linaro.org --- board/armltd/vexpress64/vexpress64.c | 2 ++ include/configs/vexpress_aemv8a.h | 11 ++++++++--- 2 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c index 3add099..6efc8c1 100644 --- a/board/armltd/vexpress64/vexpress64.c +++ b/board/armltd/vexpress64/vexpress64.c @@ -51,8 +51,10 @@ void dram_init_banksize(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; +#ifdef PHYS_SDRAM_2 gd->bd->bi_dram[1].start = PHYS_SDRAM_2; gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; +#endif }
/* diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index a99d712..3c9faf4 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -165,15 +165,20 @@ #define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x10000000)
/* Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 2 #define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */ -#define PHYS_SDRAM_2 (0x880000000) /* Top 16MB reserved for secure world use */ #define DRAM_SEC_SIZE 0x01000000 #define PHYS_SDRAM_1_SIZE 0x80000000 - DRAM_SEC_SIZE -#define PHYS_SDRAM_2_SIZE 0x180000000 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO +#define CONFIG_NR_DRAM_BANKS 2 +#define PHYS_SDRAM_2 (0x880000000) +#define PHYS_SDRAM_2_SIZE 0x180000000 +#else +#define CONFIG_NR_DRAM_BANKS 1 +#endif + /* Enable memtest */ #define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1