Hi Simon,
On 7/21/24 5:25 PM, Simon Glass wrote:
Use the log subsystem instead of dev, to avoid including function names in the code.
The CONFIG_LOGF_FUNC option can be used to enable the function name.
Signed-off-by: Simon Glass sjg@chromium.org Reviewed-by: Sean Anderson seanga2@gmail.com
(no changes since v1)
drivers/mmc/mmc.c | 49 ++++++++++++++++++++++++----------------------- 1 file changed, 25 insertions(+), 24 deletions(-)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index b18dc331f78..b0105afe5d6 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -294,7 +294,7 @@ int mmc_poll_for_busy(struct mmc *mmc, int timeout_ms)
if (status & MMC_STATUS_MASK) {#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
pr_err("Status Error: 0x%08x\n", status);
log_err("Status Error: %08x\n", status);
Please don't remove the 0x prefix (will not comment on other patches in this series if it happens again, please check :) ).
#endif return -ECOMM; } @@ -307,7 +307,7 @@ int mmc_poll_for_busy(struct mmc *mmc, int timeout_ms)
if (timeout_ms <= 0) { #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
pr_err("Timeout waiting card ready\n");
log_err("Timeout waiting card ready\n");@@ -449,7 +449,7 @@ static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start, if (blkcnt > 1) { if (mmc_send_stop_transmission(mmc, false)) { #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
pr_err("mmc fail to send stop cmd\n");
log_err("mmc fail to send stop cmd\n");@@ -500,8 +500,8 @@ ulong mmc_bread(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt,
if ((start + blkcnt) > block_dev->lba) { #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
pr_err("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",start + blkcnt, block_dev->lba);
log_err("MMC: block number " LBAF " exceeds max(" LBAF ")\n",
DOn't remove the 0x prefix please.
start + blkcnt, block_dev->lba);@@ -997,7 +997,7 @@ static int mmc_get_capabilities(struct mmc *mmc) return 0;
if (!ext_csd) {
pr_err("No ext_csd found!\n"); /* this should enver happen */
log_err("No ext_csd found!\n"); /* this should enver happen */@@ -1109,17 +1109,17 @@ int mmc_hwpart_config(struct mmc *mmc, return -EINVAL;
if (IS_SD(mmc) || (mmc->version < MMC_VERSION_4_41)) {
pr_err("eMMC >= 4.4 required for enhanced user data area\n");
log_err("eMMC >= 4.4 required for enhanced user data area\n");return -EMEDIUMTYPE; }
if (!(mmc->part_support & PART_SUPPORT)) {
pr_err("Card does not support partitioning\n");
log_err("Card does not support partitioning\n");return -EMEDIUMTYPE; }
if (!mmc->hc_wp_grp_size) {
pr_err("Card does not define HC WP group size\n");
log_err("Card does not define HC WP group size\n");@@ -1127,8 +1127,7 @@ int mmc_hwpart_config(struct mmc *mmc, if (conf->user.enh_size) { if (conf->user.enh_size % mmc->hc_wp_grp_size || conf->user.enh_start % mmc->hc_wp_grp_size) {
pr_err("User data enhanced area not HC WP group ""size aligned\n");
log_err("User data enhanced area not HC WP group size aligned\n"); return -EINVAL;@@ -1146,8 +1145,8 @@ int mmc_hwpart_config(struct mmc *mmc,
for (pidx = 0; pidx < 4; pidx++) { if (conf->gp_part[pidx].size % mmc->hc_wp_grp_size) {
pr_err("GP%i partition not HC WP group size ""aligned\n", pidx+1);
log_err("GP%i partition not HC WP group-size aligned\n",pidx + 1); return -EINVAL;@@ -1158,7 +1157,7 @@ int mmc_hwpart_config(struct mmc *mmc, }
if (part_attrs && ! (mmc->part_support & ENHNCD_SUPPORT)) {
pr_err("Card does not support enhanced attribute\n");
log_err("Card does not support enhanced attribute\n");@@ -1171,8 +1170,8 @@ int mmc_hwpart_config(struct mmc *mmc, (ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT+1] << 8) + ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT]; if (tot_enh_size_mult > max_enh_size_mult) {
pr_err("Total enhanced size exceeds maximum (%u > %u)\n",tot_enh_size_mult, max_enh_size_mult);
log_err("Total enhanced size exceeds maximum (%x > %x)\n",
If you change the type (why?) to hex, please add 0x prefix to explicit the base.
tot_enh_size_mult, max_enh_size_mult);@@ -1205,7 +1204,7 @@ int mmc_hwpart_config(struct mmc *mmc,
if (ext_csd[EXT_CSD_PARTITION_SETTING] & EXT_CSD_PARTITION_SETTING_COMPLETED) {
pr_err("Card already partitioned\n");
log_err("Card already partitioned\n");@@ -1876,7 +1875,7 @@ error: } }
- pr_err("unable to select a mode\n");
- log_err("unable to select a mode\n"); return -ENOTSUPP; }
@@ -2254,7 +2253,7 @@ error: } }
- pr_err("unable to select a mode : %d\n", err);
log_err("unable to select a mode: %d\n", err);
return -ENOTSUPP; }
@@ -2921,8 +2920,10 @@ retry:
if (err) {#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
if (!quiet)pr_err("Card did not respond to voltage select! : %d\n", err);
if (!quiet) {log_err("Card did not respond to voltage select! : %d\n",err);}
We still don't need the curly brackets here.
Looking good otherwise, Cheers, Quentin