Hi All,
On 2/26/20 6:15 PM, Giulio Benetti wrote:
This patchset add support for LCDIF on i.MXRT1050 evk. This requires PLL5 to be setup, mxsfb needs to use display_timing to retrieve if Lcd has inverted PIXCLOCK from dts.
With this patchset applied we temporary loose DCache support until it will get implemented, since a function in mxsfb.c is needed for setting cache behaviour. Anyway this way Lcd will show the console same way as serial does.
Also I've moved private sunxi_ctfb_mode_to_display_timing() to videomodes since I need it for mxfsb.c too, then having a unified function to convert from ctfb_mode to display_timing.
Giulio Benetti (18): clk: imx: pllv3: add enable_bit clk: imx: imxrt1050-clk: fix typo in clock name "video:" clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPL videomodes: add helper function to convert from ctfb to display_timing sunxi: display: use common video_ctfb_mode_to_display_timing() video: mxsfb: add support for DM CLK video: mxsfb: add support for i.MXRT video: mxsfb: refactor for using display_timings video: mxsfb: enable setting HSYNC negative polarity video: mxsfb: enable setting VSYNC negative polarity video: mxsfb: enable setting PIXDATA on negative edge video: mxsfb: enable setting ENABLE negative polarity
kindly ping for all "video: " and "sunxi: " patches. I've already fixed what Fabio and Lukasz pointed about clock-parents, sowhen can I send v2-series? Does it look ok the rest?
Thanks in advance
Best regards