7 Nov
2012
7 Nov
'12
6:56 p.m.
Hi Ilya,
On 11/06/2012 01:01 PM, Ilya Yanok wrote:
On Tue, Nov 6, 2012 at 9:24 AM, Felix Radensky <felix@embedded-sol.com mailto:felix@embedded-sol.com> wrote:
Hi Marek, On 11/06/2012 12:57 AM, Marek Vasut wrote: Can you please avoid top-posting? Does U-Boot even support your USB device? Sorry about top-posting. My USB device is supported by smsc95xx.c driver in drivers/usb/eth.Judging by the portion of config you cited you don't have it enabled. But I don't think that's your current problem (you should see your device after usb start even if there is no driver for it). I'd verify PHY configuration if I were you.
Regards, Ilya.
Thanks for replying. I do have the following definitions as well:
#define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_SMSC95XX
I'm going to compare u-boot and kernel PHY initializations. They are not the same, and in linux everything works.
Felix.