Dear Fabio Estevam,
Add a README file for mx28evk board.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com
Acked-by: Marek Vasut marex@denx.de
doc/README.mx28evk | 29 +++++++++++++++++++++++++++++ 1 files changed, 29 insertions(+), 0 deletions(-) create mode 100644 doc/README.mx28evk
diff --git a/doc/README.mx28evk b/doc/README.mx28evk new file mode 100644 index 0000000..c6c3d37 --- /dev/null +++ b/doc/README.mx28evk @@ -0,0 +1,29 @@ +FREESCALE MX28EVK +==================
+Supported hardware: only MX28EVK rev D is supported in U-boot.
+Files of the MX28EVK port +--------------------------
+arch/arm/cpu/arm926ejs/mx28/ - The CPU support code for the Freescale i.MX28 +arch/arm/include/asm/arch-mx28/ - Header files for the Freescale i.MX28 +board/freescale/mx28evk/ - MX28EVK board specific files +include/configs/mx28evk.h - MX28EVK configuration file
+Jumper configuration +---------------------
+To boot MX28EVK from an SD card, set the boot mode DIP switches as:
- Boot Mode Select: 1 0 0 1 (Boot from SD card Slot 0 - U42)
- JTAG PSWITCH RESET: To the left (reset enabled)
- Battery Source: Down
- Wall 5V: Up
- VDD 5V: To the left (off)
- Hold Button: Down (off)
+Follow the instructions from doc/README.mx28_common to generate a bootable SD +card.
+Insert the SD card in slot 0, power up the board and U-boot will boot.
Best regards, Marek Vasut