From: Timur Tabi timur@freescale.com
PREREQUISITE PATCHES:
* This patch can only be applied after the following patches have been applied:
1) DNX#2006090742000024 "Add support for multiple I2C buses" 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x" 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c" 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems" 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
CHANGELOG:
* Add support for the Freescale MPC8349E-mITX reference design platform. The second TSEC (Vitesse 7385 switch) is not supported at this time.
Signed-off-by: Timur Tabi timur@freescale.com --- board/mpc8349itx/Makefile | 48 ++++ board/mpc8349itx/config.mk | 33 +++ board/mpc8349itx/mpc8349itx.c | 460 +++++++++++++++++++++++++++++++++++++++++ board/mpc8349itx/pci.c | 347 +++++++++++++++++++++++++++++++ board/mpc8349itx/u-boot.lds | 120 +++++++++++ 5 files changed, 1008 insertions(+), 0 deletions(-)
diff --git a/board/mpc8349itx/Makefile b/board/mpc8349itx/Makefile new file mode 100644 index 0000000..31bcdb8 --- /dev/null +++ b/board/mpc8349itx/Makefile @@ -0,0 +1,48 @@ +# +# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o pci.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/mpc8349itx/config.mk b/board/mpc8349itx/config.mk new file mode 100644 index 0000000..2e11311 --- /dev/null +++ b/board/mpc8349itx/config.mk @@ -0,0 +1,33 @@ +# +# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# MPC8349ITX +# + +TEXT_BASE = 0xFEF00000 + +ifneq ($(OBJTREE),$(SRCTREE)) +# We are building u-boot in a separate directory, use generated +# .lds script from OBJTREE directory. +LDSCRIPT := $(OBJTREE)/board/$(BOARDDIR)/u-boot.lds +endif diff --git a/board/mpc8349itx/mpc8349itx.c b/board/mpc8349itx/mpc8349itx.c new file mode 100644 index 0000000..7d70161 --- /dev/null +++ b/board/mpc8349itx/mpc8349itx.c @@ -0,0 +1,460 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <ioports.h> +#include <mpc83xx.h> +#include <i2c.h> +#include <spd.h> +#include <miiphy.h> + +#ifdef CONFIG_PCI +#include <asm/mpc8349_pci.h> +#include <pci.h> +#endif + +#ifdef CONFIG_SPD_EEPROM +#include <spd_sdram.h> +#else +#include <asm/mmu.h> +#endif + +#ifndef CONFIG_SPD_EEPROM +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *)CFG_IMMRBAR; + u32 ddr_size; /* The size of RAM, in bytes */ + u32 ddr_size_log2 = 0; + + for (ddr_size = CFG_DDR_SIZE * 0x100000; ddr_size > 1; ddr_size >>= 1) { + if (ddr_size & 1) { + return -1; + } + ddr_size_log2++; + } + + im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); + im->sysconf.ddrlaw[0].bar = (CFG_DDR_SDRAM_BASE >> 12) & 0xfffff; + +/* Only one CS0 for DDR */ + im->ddr.csbnds[0].csbnds = 0x0000000f; + im->ddr.cs_config[0] = CFG_DDR_CONFIG; + + debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds); + debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]); + + debug("DDR:bar=0x%08x\n", im->sysconf.ddrlaw[0].bar); + debug("DDR:ar=0x%08x\n", im->sysconf.ddrlaw[0].ar); + + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; /* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */ + im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR; + im->ddr.sdram_mode = (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT); + im->ddr.sdram_interval = (0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT); + im->ddr.sdram_clk_cntl = DDR_SDRAM_CLK_CNTL_SS_EN | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05; + + udelay(200); + + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + + debug("DDR:timing_cfg_1=0x%08x\n", im->ddr.timing_cfg_1); + debug("DDR:timing_cfg_2=0x%08x\n", im->ddr.timing_cfg_2); + debug("DDR:sdram_mode=0x%08x\n", im->ddr.sdram_mode); + debug("DDR:sdram_interval=0x%08x\n", im->ddr.sdram_interval); + debug("DDR:sdram_cfg=0x%08x\n", im->ddr.sdram_cfg); + + return CFG_DDR_SIZE; +} +#endif + + +#ifdef CONFIG_PCI +/* + * Initialize PCI Devices, report devices found + */ +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc83xxmitx_config_table[] = { + { + PCI_ANY_ID, + PCI_ANY_ID, + PCI_ANY_ID, + PCI_ANY_ID, + 0x0f, + PCI_ANY_ID, + pci_cfgfunc_config_device, + { + PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER + } + }, + {} +} +#endif + +volatile static struct pci_controller hose[] = +{ + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxmitx_config_table, +#endif + }, + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxmitx_config_table, +#endif + } +}; +#endif /* CONFIG_PCI */ + +/* If MPC8349E-mITX is soldered with SDRAM, then initialize it. +*/ + +void sdram_init(void) +{ + volatile immap_t *immap = (immap_t *)CFG_IMMRBAR; + volatile lbus8349_t *lbc= &immap->lbus; + +#if defined(CFG_BR2_PRELIM) \ + && defined(CFG_OR2_PRELIM) \ + && defined(CFG_LBLAWBAR2_PRELIM) \ + && defined(CFG_LBLAWAR2_PRELIM) \ + && !defined(CONFIG_COMPACT_FLASH) + + uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; + + puts("\n SDRAM on Local Bus: "); + print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); + + /* + * Setup SDRAM Base and Option Registers, already done in cpu_init.c + */ + + /*setup mtrpt, lsrt and lbcr for LB bus*/ + lbc->lbcr = CFG_LBC_LBCR; + lbc->mrtpr = CFG_LBC_MRTPR; + lbc->lsrt = CFG_LBC_LSRT; + asm("sync"); + + /* + * Configure the SDRAM controller Machine Mode register. + */ + lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation*/ + + lbc->lsdmr = CFG_LBC_LSDMR_1; /*0x68636733; precharge all the banks*/ + asm("sync"); + *sdram_addr = 0xff; + udelay(100); + + lbc->lsdmr = CFG_LBC_LSDMR_2; /*0x48636733; auto refresh*/ + asm("sync"); +/*1 time*/ + *sdram_addr = 0xff; + udelay(100); +/*2 times*/ + *sdram_addr = 0xff; + udelay(100); +/*3 times*/ + *sdram_addr = 0xff; + udelay(100); +/*4 times*/ + *sdram_addr = 0xff; + udelay(100); +/*5 times*/ + *sdram_addr = 0xff; + udelay(100); +/*6 times*/ + *sdram_addr = 0xff; + udelay(100); +/*7 times*/ + *sdram_addr = 0xff; + udelay(100); +/*8 times*/ + *sdram_addr = 0xff; + udelay(100); + + lbc->lsdmr = CFG_LBC_LSDMR_4; /*0x58636733;mode register write operation*/ + asm("sync"); + *sdram_addr = 0xff; + udelay(100); + + lbc->lsdmr = CFG_LBC_LSDMR_5; /*0x40636733;normal operation*/ + asm("sync"); + *sdram_addr = 0xff; + udelay(100); + +#else + puts("SDRAM on Local Bus is NOT available!\n"); + +#ifdef CFG_BR2_PRELIM + lbc->bank[2].br = CFG_BR2_PRELIM; + lbc->bank[2].or = CFG_OR2_PRELIM; +#endif + +#ifdef CFG_BR3_PRELIM + lbc->bank[3].br = CFG_BR3_PRELIM; + lbc->bank[3].or = CFG_OR3_PRELIM; +#endif +#endif +} + +long int initdram (int board_type) +{ + volatile immap_t *im = (immap_t *)CFG_IMMRBAR; + u32 msize = 0; +#ifdef CONFIG_DDR_ECC + volatile ddr8349_t *ddr = &im->ddr; +#endif + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; +#ifdef CONFIG_SPD_EEPROM + msize = spd_sdram(); +#else + msize = fixed_sdram(); +#endif + +#ifdef CONFIG_DDR_ECC + if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) + /* Unlike every other board, on the 83xx spd_sdram() returns + megabytes instead of just bytes. That's why we need to + multiple by 1MB when calling ddr_enable_ecc(). */ + ddr_enable_ecc(msize * 1048576); +#endif + + /* + * Initialize SDRAM if it is on local bus. + */ + sdram_init(); + puts(" DDR RAM: "); + /* return total bus SDRAM size(bytes) -- DDR */ + return msize * 1024 * 1024; +} + +int checkboard(void) +{ +#ifdef CONFIG_HARD_I2C + u8 i2c_data; +#endif + + puts("Board: Freescale MPC8349E-mITX"); + +#ifdef CONFIG_HARD_I2C + i2c_set_bus_num(I2C_BUS_2); + if (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) + printf(" %u.%u (PCF8475A)", (i2c_data & 0x02) >> 1, i2c_data & 0x01); + else if (i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) + printf(" %u.%u (PCF8475)", (i2c_data & 0x02) >> 1, i2c_data & 0x01); + else + printf(" ?.?"); +#endif + + puts("\n"); + + return 0; +} + +/** + * Implement a work-around for a hardware problem with compact + * flash. + * + * Program the UPM if compact flash is enabled. + */ +int misc_init_f(void) +{ + volatile u32 *vsc7385_cpuctrl; + + /* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register. The power up + default of VSC7385 L1_IRQ and L2_IRQ requests are active high. That + means it is 0 when the IRQ is not active. This makes the wire-AND + logic always assert IRQ7 to CPU even if there is no request from the + switch. Since the compact flash and the switch share the same IRQ, + the Linux kernel will think that the compact flash is requesting irq + and get stuck when it tries to clear the IRQ. Thus we need to set + the L2_IRQ0 and L2_IRQ1 to active low. + + The following code sets the L1_IRQ and L2_IRQ polarity to active low. + Without this code, compact flash will not work in Linux because + unlike U-Boot, Linux uses the IRQ, so this code is necessary if we + don't enable compact flash for U-Boot. + */ + + vsc7385_cpuctrl = (volatile u32 *) (CFG_VSC7385_BASE + 0x1c0c0); + *vsc7385_cpuctrl |= 0x0c; + +#ifdef CONFIG_COMPACT_FLASH + /* UPM Table Configuration Code */ + static uint UPMATable[] = + { + 0xcffffc00, 0x0fffff00, 0x0fafff00, 0x0fafff00, + 0x0faffd00, 0x0faffc04, 0x0ffffc00, 0x3ffffc01, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfff7fc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, + 0xcffffc00, 0x0fffff00, 0x0ff3ff00, 0x0ff3ff00, + 0x0ff3fe00, 0x0ffffc00, 0x3ffffc05, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 + + }; + volatile immap_t *immap = (immap_t *) CFG_IMMRBAR; + volatile lbus8349_t *lbus = &immap->lbus; + + lbus->bank[3].br = CFG_BR3_PRELIM; + lbus->bank[3].or = CFG_OR3_PRELIM; + + /* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000, + GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000 + */ + lbus->mamr = 0x08404440; + + upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0])); + + puts("UPMA: Configured for compact flash\n"); +#endif + + return 0; +} + +/** + * Make sure the EEPROM has the HRCW correctly programmed. + * Make sure the RTC is correctly programmed. + * + * The MPC8349E-mITX can be configured to load the HRCW from + * EEPROM instead of flash. This is controlled via jumpers + * LGPL0, 1, and 3. Normally, these jumpers are set to 000 (all + * jumpered), but if they're set to 001 or 010, then the HRCW is + * read from the "I2C EEPROM". + * + * This function makes sure that the I2C EEPROM is programmed + * correctly. + */ +int misc_init_r(void) +{ + int rc = 0; + +#ifdef CONFIG_HARD_I2C + + uchar orig_bus = i2c_get_bus_num();; + +#ifdef CFG_I2C_RTC_ADDR + char ds1339_data[17]; +#endif + +#ifdef CFG_I2C_EEPROM_ADDR + static u8 eeprom_data[] = /* HRCW data */ + { + 0xaa, 0x55, 0xaa, + 0x7c, 0x02, 0x40, 0x05, 0x04, 0x00, 0x00, + 0x7c, 0x02, 0x41, 0xb4, 0x60, 0xa0, 0x00, + }; + + u8 data[sizeof(eeprom_data)]; + + i2c_set_bus_num(I2C_BUS_1); + + if (i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) { + if (memcmp(data, eeprom_data, sizeof(data)) != 0) { + if (i2c_write(CFG_I2C_EEPROM_ADDR, 0, 2, eeprom_data, sizeof(eeprom_data)) != 0) { + puts("Failure writing the HRCW to EEPROM via I2C.\n"); + rc = 1; + } + } + } else { + puts("Failure reading the HRCW from EEPROM via I2C.\n"); + rc = 1; + } +#endif + +#ifdef CFG_I2C_RTC_ADDR + i2c_set_bus_num(I2C_BUS_2); + + if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data)) == 0) { + + /* Work-around for MPC8349E-mITX bug #13601. + If the RTC does not contain valid register values, the DS1339 + Linux driver will not work. + */ + + /* Make sure status register bits 6-2 are zero */ + ds1339_data[0x0f] &= ~0x7c; + + /* Check for a valid day register value */ + ds1339_data[0x03] &= ~0xf8; + if (ds1339_data[0x03] == 0) { + ds1339_data[0x03] = 1; + } + + /* Check for a valid date register value */ + ds1339_data[0x04] &= ~0xc0; + if ((ds1339_data[0x04] == 0) || + ((ds1339_data[0x04] & 0x0f) > 9) || + (ds1339_data[0x04] >= 0x32)) { + ds1339_data[0x04] = 1; + } + + /* Check for a valid month register value */ + ds1339_data[0x05] &= ~0x60; + + if ((ds1339_data[0x05] == 0) || + ((ds1339_data[0x05] & 0x0f) > 9) || + ((ds1339_data[0x05] >= 0x13) && (ds1339_data[0x05] <= 0x19))) { + ds1339_data[0x05] = 1; + } + + /* Enable Oscillator and rate select */ + ds1339_data[0x0e] = 0x1c; + + /* Work-around for MPC8349E-mITX bug #13330. + Ensure that the RTC control register contains the value 0x1c. + This affects SATA performance. + */ + + if (i2c_write(CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data))) { + puts("Failure writing to the RTC via I2C.\n"); + rc = 1; + } + } else { + puts("Failure reading from the RTC via I2C.\n"); + rc = 1; + } +#endif + + i2c_set_bus_num(orig_bus); +#endif + + return rc; +} + diff --git a/board/mpc8349itx/pci.c b/board/mpc8349itx/pci.c new file mode 100644 index 0000000..22ab736 --- /dev/null +++ b/board/mpc8349itx/pci.c @@ -0,0 +1,347 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#ifdef CONFIG_PCI + +#include <asm/mmu.h> +#include <asm/global_data.h> +#include <pci.h> +#include <asm/mpc8349_pci.h> +#include <i2c.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* System RAM mapped to PCI space */ +#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE + +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc8349itx_config_table[] = +{ + { + PCI_ANY_ID, + PCI_ANY_ID, + PCI_ANY_ID, + PCI_ANY_ID, + PCI_IDSEL_NUMBER, + PCI_ANY_ID, + pci_cfgfunc_config_device, + { + PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER + } + }, + {} +}; +#endif + +static struct pci_controller pci_hose[] = +{ + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc8349itx_config_table, +#endif + }, + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc8349itx_config_table, +#endif + } +}; + +/************************************************************************** + * pci_init_board() + * + * NOTICE: PCI2 is not currently supported + * + */ +void pci_init_board(void) +{ + volatile immap_t * immr; + volatile clk8349_t * clk; + volatile law8349_t * pci_law; + volatile pot8349_t * pci_pot; + volatile pcictrl8349_t * pci_ctrl; + volatile pciconf8349_t * pci_conf; + u8 reg8; + u16 reg16; + u32 reg32; + u32 dev; + struct pci_controller * hose; + + immr = (immap_t *)CFG_IMMRBAR; + clk = (clk8349_t *)&immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + + hose = &pci_hose[0]; + + /* + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode + */ + + reg32 = clk->occr; + udelay(2000); + +#ifdef CONFIG_HARD_I2C + i2c_set_bus_num(I2C_BUS_2); + /* Read the PCI_M66EN jumper setting */ + if ((i2c_read(CFG_I2C_8574_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0) || + (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0)) { + if (reg8 & I2C_8574_PCI66) + clk->occr = 0xff000000; /* 66 MHz PCI */ + else + clk->occr = 0xff600001; /* 33 MHz PCI */ + } else { + clk->occr = 0xff600001; /* 33 MHz PCI */ + } +#else + clk->occr = 0xff000000; /* 66 MHz PCI */ +#endif + + udelay(2000); + + /* + * Release PCI RST Output signal + */ + pci_ctrl[0].gcr = 0; + udelay(2000); + pci_ctrl[0].gcr = 1; + +#ifdef CONFIG_MPC83XX_PCI2 + pci_ctrl[1].gcr = 0; + udelay(2000); + pci_ctrl[1].gcr = 1; +#endif + + /* We need to wait at least a 1sec based on PCI specs */ + { + int i; + + for (i=0; i<1000; i++) + udelay(1000); + } + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; + + pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI1 mem space - prefetch */ + pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI1 IO space */ + pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + + /* PCI1 mmio - non-prefetch mem space */ + pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[2].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[0].pitar1 = 0x0; + pci_ctrl[0].pibar1 = 0x0; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | + PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); + + hose->first_busno = 0; + hose->last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose->regions + 0, + CFG_PCI1_MEM_BASE, + CFG_PCI1_MEM_PHYS, + CFG_PCI1_MEM_SIZE, + PCI_REGION_MEM|PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose->regions + 1, + CFG_PCI1_MMIO_BASE, + CFG_PCI1_MMIO_PHYS, + CFG_PCI1_MMIO_SIZE, + PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 2, + CFG_PCI1_IO_BASE, + CFG_PCI1_IO_PHYS, + CFG_PCI1_IO_SIZE, + PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 3, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + gd->ram_size, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 4; + + pci_setup_indirect(hose, + (CFG_IMMRBAR+0x8300), + (CFG_IMMRBAR+0x8304)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + +#ifdef CONFIG_PCI_SCAN_SHOW + printf("PCI: Bus Dev VenId DevId Class Int\n"); +#endif + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); + +#ifdef CONFIG_MPC83XX_PCI2 + hose = &pci_hose[1]; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI2 mem space - prefetch */ + pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI2 IO space */ + pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + + /* PCI2 mmio - non-prefetch mem space */ + pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | (POCMR_CM_256M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[1].pitar1 = 0x0; + pci_ctrl[1].pibar1 = 0x0; + pci_ctrl[1].piebar1 = 0x0; + pci_ctrl[1].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); + + hose->first_busno = pci_hose[0].last_busno + 1; + hose->last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose->regions + 0, + CFG_PCI2_MEM_BASE, + CFG_PCI2_MEM_PHYS, + CFG_PCI2_MEM_SIZE, + PCI_REGION_MEM|PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose->regions + 1, + CFG_PCI2_MMIO_BASE, + CFG_PCI2_MMIO_PHYS, + CFG_PCI2_MMIO_SIZE, + PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 2, + CFG_PCI2_IO_BASE, + CFG_PCI2_IO_PHYS, + CFG_PCI2_IO_SIZE, + PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 3, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + gd->ram_size, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 4; + + pci_setup_indirect(hose, + (CFG_IMMRBAR+0x8380), + (CFG_IMMRBAR+0x8384)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); +#endif +} + +#endif /* CONFIG_PCI */ diff --git a/board/mpc8349itx/u-boot.lds b/board/mpc8349itx/u-boot.lds new file mode 100644 index 0000000..f044c0f --- /dev/null +++ b/board/mpc8349itx/u-boot.lds @@ -0,0 +1,120 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc83xx/start.o (.text) + *(.text) + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} +ENTRY(_start)