These changes are from u-boot-xlnx.git repo from git.xilinx.com and in addition of basic fdt support. This repo is well tested on xilinx zynq platform, hence pushing the same on upstream.
Excluded qspi and nand changes from previous series.
-- Thanks, Jagan.
Changes for v5: - rebase to u-boot-arm/master - Enabled CONFIG_DEFAULT_DEVICE_TREE in pre-board config files. - Updated build steps on doc/README.zynq Changes for v4: - rebase to master - Removed CONFIG_SYS_NO_FLASH in zynq-common.h Changes for v3: - Removed CONFIG_ZYNQ_QSPI - Removed CONFIG_NAND_ZYNQ - Removed CONFIG_SYS_PROMPT_HUSH_PS2 - Documented bootmode detection code - Added comments
Jagannadha Sutradharudu Teki (30): zynq: Enable CONFIG_FIT_VERBOSE zynq: Enable Boot FreeBSD/vxWorks zynq: Cleanup on miscellaneous configs zynq: Cleanup on memory configs zynq: Minor config cleanup zynq: Enable cache options zynq: Add UART0, UART1 configs support zynq: Add GEM0, GEM1 configs support zynq-common: Rename zynq with zynq-common doc: zynq: Add information on zynq u-boot zynq: Add zynq zc70x board support zynq: Add zynq zed board support zynq: Move CONFIG_SYS_SDRAM_SIZE to pre-board configs zynq-common: Define exact TEXT_BASE zynq: zc70x: Add Catalyst 24WC08 EEPROM config support zynq: Add zynq microzed board support zynq: Add zynq_zc770 xm010 board support zynq: Add zynq_zc770 xm013 board support zynq: Add zynq_zc770 xm012 board support zynq: Add support to find bootmode zynq-common: Define default environment zynq-common: Change Env. Sector size to 128Kb zynq-common: Define flash env. partition zynq-common: Define CONFIG_ENV_OVERWRITE dts: zynq: Add basic fdt support gpio: zynq: Add dummy gpio routines zynq-common: Enable verified boot(RSA) dts: zynq: Add more zynq dts files zynq: Enable CONFIG_DEFAULT_DEVICE_TREE doc: Update the zynq u-boot status
arch/arm/cpu/armv7/zynq/slcr.c | 6 + arch/arm/dts/zynq-7000.dtsi | 13 ++ arch/arm/include/asm/arch-zynq/gpio.h | 25 +++ arch/arm/include/asm/arch-zynq/sys_proto.h | 1 + board/xilinx/dts/zynq-microzed.dts | 14 ++ board/xilinx/dts/zynq-zc702.dts | 14 ++ board/xilinx/dts/zynq-zc706.dts | 14 ++ board/xilinx/dts/zynq-zc770-xm010.dts | 14 ++ board/xilinx/dts/zynq-zc770-xm012.dts | 14 ++ board/xilinx/dts/zynq-zc770-xm013.dts | 14 ++ board/xilinx/dts/zynq-zed.dts | 14 ++ board/xilinx/zynq/board.c | 25 +++ boards.cfg | 8 +- doc/README.zynq | 94 ++++++++++++ include/configs/zynq-common.h | 238 +++++++++++++++++++++++++++++ include/configs/zynq.h | 139 ----------------- include/configs/zynq_microzed.h | 26 ++++ include/configs/zynq_zc70x.h | 29 ++++ include/configs/zynq_zc770.h | 42 +++++ include/configs/zynq_zed.h | 27 ++++ 20 files changed, 630 insertions(+), 141 deletions(-) create mode 100644 arch/arm/dts/zynq-7000.dtsi create mode 100644 arch/arm/include/asm/arch-zynq/gpio.h create mode 100644 board/xilinx/dts/zynq-microzed.dts create mode 100644 board/xilinx/dts/zynq-zc702.dts create mode 100644 board/xilinx/dts/zynq-zc706.dts create mode 100644 board/xilinx/dts/zynq-zc770-xm010.dts create mode 100644 board/xilinx/dts/zynq-zc770-xm012.dts create mode 100644 board/xilinx/dts/zynq-zc770-xm013.dts create mode 100644 board/xilinx/dts/zynq-zed.dts create mode 100644 doc/README.zynq create mode 100644 include/configs/zynq-common.h delete mode 100644 include/configs/zynq.h create mode 100644 include/configs/zynq_microzed.h create mode 100644 include/configs/zynq_zc70x.h create mode 100644 include/configs/zynq_zc770.h create mode 100644 include/configs/zynq_zed.h