Hej Patrick,
Am 09.05.2017 um 14:43 schrieb Patrick Wildt:
The NanoPi Neo2 is basically the same as the NanoPi Neo, but that they replaced the SoC with the 64-bit Allwinner H5 SoC. Add a (64-bit only) defconfig defining the required options to build the U-Boot proper.
Create a new .dts file for it by including the (32-bit) H3 SoC .dtsi and changing the differing components accordingly, like it's been done for the OrangePi PC 2.
Signed-off-by: Patrick Wildt patrick@blueri.se
I've tested this patch on top of yesterday's master branch (4c78028737c3185f49f5691183aeac3478b5f699 "mksunxi_fit_atf.sh: Allow for this to complete when bl31.bin is missing").
Considering Tom's unanswered question, is there any diff to the upstream kernel .dts? Expected would be to just copy the Linux .dts file here and to state which tree and commit/tag it was taken from.
Using this dtb here via UEFI distro boot, my openSUSE kernel image that booted okay on orangepi_pc2 fails to find the MMC devices on Neo2, although it obviously succeeded to boot from SD in U-Boot and GRUB...
Also, if I "reset" from the downstream or patched mainline U-Boot prompt, SPL gets stuck:
=> reset resetting ... INFO: PSCI Affinity Map: INFO: AffInst: Level 0, MPID 0x0, State ON INFO: AffInst: Level 0, MPID 0x1, State OFF INFO: AffInst: Level 0, MPID 0x2, State OFF INFO: AffInst: Level 0, MPID 0x3, State OFF
U-Boot SPL 2017.05-00660-g4bffee2792 (May 24 2017 - 00:43:24) DRAM: 512 MiB Trying to boot from MMC1
If instead I unpower it (by plugging Micro USB), it boots okay:
U-Boot SPL 2017.05-00660-g4bffee2792 (May 24 2017 - 00:43:24) DRAM: 512 MiB Trying to boot from MMC1 NOTICE: BL3-1: Running in SRAM A2 (@0x44000) NOTICE: Configuring SPC Controller NOTICE: BL3-1: v1.0(debug):1.0~20160809T000419~45ab97e NOTICE: BL3-1: Built : 01:01:56, Nov 15 2016 NOTICE: Configuring AXP PMIC ERROR: set run-time address: 0x0 ERROR: PMIC: unknown PMIC type number 0x0 ERROR: Could not connect to AXP PMIC. INFO: BL3-1: Initializing runtime services INFO: BL3-1: Preparing for EL3 exit to normal world INFO: BL3-1: Next image address: 0x4a000000, SPSR: 0x3c9
U-Boot 2017.05-00660-g4bffee2792 (May 24 2017 - 00:43:24 +0200) Allwinner Technology
CPU: Allwinner H5 (SUN50I) Model: FriendlyARM NanoPi NEO2 DRAM: 512 MiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Net: No ethernet found. starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0
Andre, is this reset problem maybe an ATF issue?
Regards, Andreas