Signed-off-by: Chris Packham judge.packham@gmail.com ---
common/Kconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/common/Kconfig b/common/Kconfig index 57bd16d9623c..2c017df4087c 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -308,7 +308,7 @@ config SILENT_CONSOLE help This option allows the console to be silenced, meaning that no output will appear on the console devices. This is controlled by - setting the environment vaariable 'silent' to a non-empty value. + setting the environment variable 'silent' to a non-empty value. Note this also silences the console when booting Linux.
When the console is set up, the variable is checked, and the @@ -430,7 +430,7 @@ config SYS_CONSOLE_INFO_QUIET help Normally U-Boot displays the current settings for stdout, stdin and stderr on boot when the post-relocation console is set up. - Enable this option to supress this output. It can be obtained by + Enable this option to suppress this output. It can be obtained by calling stdio_print_current_devices() from board code.
config SYS_STDIO_DEREGISTER @@ -565,14 +565,14 @@ config LOG_TEST This enables a 'log test' command to test logging. It is normally executed from a pytest and simply outputs logging information in various different ways to test that the logging system works - correctly with varoius settings. + correctly with various settings.
config LOG_ERROR_RETURN bool "Log all functions which return an error" depends on LOG help When an error is returned in U-Boot it is sometimes difficult to - figure out the root cause. For eaxmple, reading from SPI flash may + figure out the root cause. For example, reading from SPI flash may fail due to a problem in the SPI controller or due to the flash part not returning the expected information. This option changes log_ret() to log any errors it sees. With this option disabled, @@ -661,7 +661,7 @@ config ARCH_MISC_INIT With this option U-Boot will call arch_misc_init() after relocation to allow miscellaneous arch-dependent initialisation to be performed. This function should be defined by the board - and will be called after the console is set up, after relocaiton. + and will be called after the console is set up, after relocation.
config BOARD_EARLY_INIT_F bool "Call board-specific init before relocation"