This allow the phy to enter idle and then suspend. the K2 platforms require the PHY to be suspended before the USB domain clock can be turned off.
Signed-off-by: Jean-Jacques Hiblot jjhiblot@ti.com ---
Changes in v2: None
drivers/usb/dwc3/core.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 56e2a046bf..ae01490306 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -581,6 +581,12 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) return 0; }
+static void dwc3_gadget_run(struct dwc3 *dwc) +{ + dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_RUN_STOP); + mdelay(100); +} + static void dwc3_core_exit_mode(struct dwc3 *dwc) { switch (dwc->dr_mode) { @@ -598,6 +604,13 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc) /* do nothing */ break; } + + /* + * switch back to peripheral mode + * This enables the phy to enter idle and then, if enabled, suspend. + */ + dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); + dwc3_gadget_run(dwc); }
#define DWC3_ALIGN_MASK (16 - 1)