This is an RFC. Do NOT apply. It outputs the message, tricks MAKEALL to count it as warning.
York
On 07/29/2014 02:23 PM, York Sun wrote:
Some mpc85xx boards are using 768KB size u-boot image while some legacy boards still use 512KB. To bring attention to users about the size change, a message is printed when compiling. SPL/PBL is not covered by this change.
Signed-off-by: York Sun yorksun@freescale.com CC: Kim Phillips kim.phillips@freescale.com
Makefile | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/Makefile b/Makefile index ca212b5..5c823dc 100644 --- a/Makefile +++ b/Makefile @@ -691,8 +691,20 @@ BOARD_SIZE_CHECK = \ exit 1; \ fi else +ifdef CONFIG_MPC85xx +BOARD_SIZE_CHECK = \
- @actual=`wc -c $@ | awk '{print $$1}'`; \
- limit=524288; \
- if test $$actual -gt $$limit; then \
echo "Attention: File size $$actual bytes, may be different from legacy images" >&2; \offset=`printf "%x" $$actual`; \echo " NOR flash address for u-boot.bin: 0x$$offset from end of boot bank" >&2; \echo " See board README"; \- fi
+else BOARD_SIZE_CHECK = endif +endif
# Statically apply RELA-style relocations (currently arm64 only) ifneq ($(CONFIG_STATIC_RELA),)