From: Fabio Estevam festevam@denx.de
Since commit 1a7904fdfa7d ("mmc: fsl_esdhc_imx: Use esdhc_soc_data flags to set host caps") the following SD card error is observed on an imx7d-sdb board:
U-Boot 2023.04-00652-g487e42f7bc5e (Apr 05 2023 - 22:14:21 -0300)
CPU: Freescale i.MX7D rev1.0 1000 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 35C Reset cause: POR Model: Freescale i.MX7 SabreSD Board Board: i.MX7D SABRESD in non-secure mode DRAM: 1 GiB Core: 100 devices, 19 uclasses, devicetree: separate PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... Card did not respond to voltage select! : -110 *** Warning - No block device, using default environment
Setting UHS_CAPS only based on the CONFIG_MMC_UHS_SUPPORT config option is not correct because UHS_CAPS has the following definition:
#define UHS_CAPS (MMC_CAP(UHS_SDR12) | MMC_CAP(UHS_SDR25) | \ MMC_CAP(UHS_SDR50) | MMC_CAP(UHS_SDR104) | \ MMC_CAP(UHS_DDR50))
and the SD card may not necessarily support all these modes.
Remove the UHS_CAPS setting to fix the SD card regression.
Fixes: 1a7904fdfa7d ("mmc: fsl_esdhc_imx: Use esdhc_soc_data flags to set host caps") Signed-off-by: Fabio Estevam festevam@denx.de --- Changes since v1: - Remove setting UHS_CAPS completely.
drivers/mmc/fsl_esdhc_imx.c | 7 ------- 1 file changed, 7 deletions(-)
diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c index 66caf683f7..5e7d9f41b6 100644 --- a/drivers/mmc/fsl_esdhc_imx.c +++ b/drivers/mmc/fsl_esdhc_imx.c @@ -1258,13 +1258,6 @@ static int fsl_esdhc_init(struct fsl_esdhc_priv *priv, esdhc_write32(®s->tuning_ctrl, val); }
- /* - * UHS doesn't have explicit ESDHC flags, so if it's - * not supported, disable it in config. - */ - if (CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)) - cfg->host_caps |= UHS_CAPS; - if (CONFIG_IS_ENABLED(MMC_HS200_SUPPORT)) { if (priv->flags & ESDHC_FLAG_HS200) cfg->host_caps |= MMC_CAP(MMC_HS_200);