This drivers supports the USB2 PHY found on omap5 and dra7 SOCs.
Signed-off-by: Jean-Jacques Hiblot jjhiblot@ti.com ---
drivers/phy/Kconfig | 8 ++ drivers/phy/Makefile | 2 + drivers/phy/omap-usb2-phy.c | 186 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 196 insertions(+) create mode 100644 drivers/phy/omap-usb2-phy.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 3b9a09c..dbf4e4d 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -85,4 +85,12 @@ config STI_USB_PHY used by USB2 and USB3 Host controllers available on STiH407 SoC families.
+config OMAP_USB2_PHY + bool "Support OMAP's USB2 PHY" + depends on PHY + depends on SYSCON + help + Support for the OMAP's USB2 PHY. + This PHY is found on OMAP devices supporting USB2. + endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 668040b..ab7f205 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -10,3 +10,5 @@ obj-$(CONFIG_$(SPL_)NOP_PHY) += nop-phy.o obj-$(CONFIG_PHY_SANDBOX) += sandbox-phy.o obj-$(CONFIG_$(SPL_)PIPE3_PHY) += ti-pipe3-phy.o obj-$(CONFIG_STI_USB_PHY) += sti_usb_phy.o +obj-$(CONFIG_OMAP_USB2_PHY) += omap-usb2-phy.o + diff --git a/drivers/phy/omap-usb2-phy.c b/drivers/phy/omap-usb2-phy.c new file mode 100644 index 0000000..c8a87a5 --- /dev/null +++ b/drivers/phy/omap-usb2-phy.c @@ -0,0 +1,186 @@ +/* + * OMAP USB2 PHY driver + * + * Copyright (c) 2017 + * Jean-Jacques Hiblot jjhiblot@ti.com + * based on dwc3-sti-glue + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <dm.h> +#include <errno.h> +#include <generic-phy.h> +#include <regmap.h> +#include <syscon.h> + +#define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT BIT(0) + +#define OMAP_DEV_PHY_PD BIT(0) +#define OMAP_USB2_PHY_PD BIT(28) + +#define USB2PHY_DISCON_BYP_LATCH BIT(31) +#define USB2PHY_ANA_CONFIG1 (0x4c) + +DECLARE_GLOBAL_DATA_PTR; + +struct omap_usb2_phy { + struct regmap *pwr_regmap; + ulong flags; + void *phy_base; + u32 pwr_reg_offset; +}; + +struct usb_phy_data { + const char *label; + u8 flags; + u32 mask; + u32 power_on; + u32 power_off; +}; + +static const struct usb_phy_data omap5_usb2_data = { + .label = "omap5_usb2", + .flags = 0, + .mask = OMAP_DEV_PHY_PD, + .power_off = OMAP_DEV_PHY_PD, +}; + +static const struct usb_phy_data dra7x_usb2_data = { + .label = "dra7x_usb2", + .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT, + .mask = OMAP_DEV_PHY_PD, + .power_off = OMAP_DEV_PHY_PD, +}; + +static const struct usb_phy_data dra7x_usb2_phy2_data = { + .label = "dra7x_usb2_phy2", + .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT, + .mask = OMAP_USB2_PHY_PD, + .power_off = OMAP_USB2_PHY_PD, +}; + +static const struct udevice_id omap_usb2_id_table[] = { + { + .compatible = "ti,omap5-usb2", + .data = (ulong)&omap5_usb2_data, + }, + { + .compatible = "ti,dra7x-usb2", + .data = (ulong)&dra7x_usb2_data, + }, + { + .compatible = "ti,dra7x-usb2-phy2", + .data = (ulong)&dra7x_usb2_phy2_data, + }, + {}, +}; + +static int omap_usb_phy_power(struct phy *usb_phy, bool on) +{ + struct udevice *dev = usb_phy->dev; + const struct usb_phy_data *data; + const struct omap_usb2_phy *phy = dev_get_priv(dev); + u32 val; + int rc; + + data = (const struct usb_phy_data *)dev_get_driver_data(dev); + if (!data) + return -EINVAL; + + rc = regmap_read(phy->pwr_regmap, phy->pwr_reg_offset, &val); + if (rc) + return rc; + val &= ~data->mask; + if (on) + val |= data->power_on; + else + val |= data->power_off; + rc = regmap_write(phy->pwr_regmap, phy->pwr_reg_offset, val); + if (rc) + return rc; + + return 0; +} + +static int omap_usb2_phy_init(struct phy *usb_phy) +{ + struct udevice *dev = usb_phy->dev; + struct omap_usb2_phy *priv = dev_get_priv(dev); + u32 val; + + if (priv->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) { + /* + * + * Reduce the sensitivity of internal PHY by enabling the + * DISCON_BYP_LATCH of the USB2PHY_ANA_CONFIG1 register. This + * resolves issues with certain devices which can otherwise + * be prone to false disconnects. + * + */ + val = readl(priv->phy_base + USB2PHY_ANA_CONFIG1); + val |= USB2PHY_DISCON_BYP_LATCH; + writel(val, priv->phy_base + USB2PHY_ANA_CONFIG1); + } + + return omap_usb_phy_power(usb_phy, true); +} + +static int omap_usb2_phy_exit(struct phy *usb_phy) +{ + return omap_usb_phy_power(usb_phy, false); +} + +struct phy_ops omap_usb2_phy_ops = { + .init = omap_usb2_phy_init, + .exit = omap_usb2_phy_exit, +}; + +int omap_usb2_phy_probe(struct udevice *dev) +{ + int rc; + struct regmap *regmap; + struct omap_usb2_phy *priv = dev_get_priv(dev); + const struct usb_phy_data *data; + u32 tmp[2]; + + data = (const struct usb_phy_data *)dev_get_driver_data(dev); + if (!data) + return -EINVAL; + + if (data->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) { + u32 base = dev_read_addr(dev); + + if (base == FDT_ADDR_T_NONE) + return -EINVAL; + priv->phy_base = (void *)base; + priv->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT; + } + + regmap = syscon_regmap_lookup_by_phandle(dev, "syscon-phy-power"); + if (IS_ERR(regmap)) { + printf("can't get regmap (err %ld)\n", PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + priv->pwr_regmap = regmap; + + rc = dev_read_u32_array(dev, "syscon-phy-power", tmp, 2); + if (rc) { + printf("couldn't get power reg. offset (err %d)\n", rc); + return rc; + } + priv->pwr_reg_offset = tmp[1]; + + return 0; +} + +U_BOOT_DRIVER(omap_usb2_phy) = { + .name = "omap_usb2_phy", + .id = UCLASS_PHY, + .of_match = omap_usb2_id_table, + .probe = omap_usb2_phy_probe, + .ops = &omap_usb2_phy_ops, + .priv_auto_alloc_size = sizeof(struct omap_usb2_phy), +};