Hello everybody, yesterday I solved my problem. It was a faulty sdram initialization. But still don't know why the values I used before didn't work. But its kind of robustness that the systems works with the values assumed not to work. Anyway, thank you for your help.
Best regards,
Andre
Andre Puschmann wrote:
Hey folkes, I have ported u-boot to a custom board based on a freescale mpc5200. I can successfully copy u-boot into flash using the connected bdi2000 and we get some output on the debug port. It seems that the board crashes right after relocation to ram (see output). I already read the regarding faq entry but I'm not sure if this problem has something to do with faulty sdram initialization.
this is the output than comes up on the console:
20030.56> U-Boot 1.1.6-ge4bbd8da-dirty (Nov 27 2006 - 18:46:24) 20030.56> 20030.56> CPU: MPC5200 v1.2, Core v1.1 at 396 MHz 20030.56> Bus 132 MHz, IPB 66 MHz, PCI 33 MHz 20030.57> Board: MPC5200 ECU 20030.57> I2C: 85 kHz, ready 20030.57> DRAM: 8 MB 20030.57> FLASH:
I'm using eldk 4.0 + insight to debug the problem. I can single-step through the code up to the point where it branches to sdram. After relocation I loaded a new symbol file width offset 0x7d8000, since this is the dest-address for relocate_code().
If I continue running from that point on the board crashes at 0x7dc314 which is in function loadtask(). In assembler the code looks like this: "0x7dc314 <loadtask+48>: lwz r11,-32768(r30)"
Can this be a sdram related problem or what might cause this behavior?
Any comments and suggestions are more than welcome.
Best regards,
André Puschmann
Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=D...