On 3/19/24 03:45, Marek Vasut wrote:
This patch adds STM32 PWR regulators DT support on stm32mp131. This requires TFA to clear RCC_SECCFGR, is disabled by default and can only be enabled on board DT level.
Signed-off-by: Marek Vasut marex@denx.de
Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com Cc: Tom Rini trini@konsulko.com Cc: u-boot@dh-electronics.com Cc: u-boot@lists.denx.de Cc: uboot-stm32@st-md-mailman.stormreply.com
arch/arm/dts/stm32mp131.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)
diff --git a/arch/arm/dts/stm32mp131.dtsi b/arch/arm/dts/stm32mp131.dtsi index 81d99a7582b..ad331b73d18 100644 --- a/arch/arm/dts/stm32mp131.dtsi +++ b/arch/arm/dts/stm32mp131.dtsi @@ -1092,6 +1092,30 @@ <&scmi_clk CK_SCMI_LSI>; };
pwr_regulators: pwr@50001000 {compatible = "st,stm32mp1,pwr-reg";reg = <0x50001000 0x10>;status = "disabled";reg11: reg11 {regulator-name = "reg11";regulator-min-microvolt = <1100000>;regulator-max-microvolt = <1100000>;};reg18: reg18 {regulator-name = "reg18";regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;};usb33: usb33 {regulator-name = "usb33";regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;};};- exti: interrupt-controller@5000d000 { compatible = "st,stm32mp13-exti", "syscon"; interrupt-controller;
Applied to u-boot-stm32/next
Thanks Patrice