Use device-tree node property names for parsing nodes instead of indexing as indexing could be different between different SoCs based on number of DSS entities available on that particular SoC.
Also correct the video layer naming in driver to match to actual one being used in upstream DSS device-tree node [1].
This also fixes AM62x splash screen usage using the latest upstream DSS device-tree nodes where hard-coded indexing which driver was using before this patch was not matching the correct properties in the DT node.
[1]: Upstream AM62x DSS node: https://github.com/torvalds/linux/blob/v6.8-rc1/arch/arm64/boot/dts/ti/k3-am...
Fixes: 5f9f816bb8 ("drivers: video: tidss: TIDSS video driver support for AM62x") Signed-off-by: Devarsh Thakkar devarsht@ti.com --- drivers/video/tidss/tidss_drv.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/video/tidss/tidss_drv.c b/drivers/video/tidss/tidss_drv.c index e285f255d7..1380c6b693 100644 --- a/drivers/video/tidss/tidss_drv.c +++ b/drivers/video/tidss/tidss_drv.c @@ -107,7 +107,7 @@ const struct dss_features dss_am625_feats = {
.num_planes = 2, /* note: vid is plane_id 0 and vidl1 is plane_id 1 */ - .vid_name = { "vidl1", "vid1" }, + .vid_name = { "vidl1", "vid" }, .vid_lite = { true, false }, .vid_order = { 1, 0 }, }; @@ -814,13 +814,13 @@ static int tidss_drv_probe(struct udevice *dev) priv->bus_format = &dss_bus_formats[8];
/* Common address */ - priv->base_common = dev_remap_addr_index(dev, 0); + priv->base_common = dev_remap_addr_name(dev, priv->feat->common); if (!priv->base_common) return -EINVAL;
/* plane address setup and enable */ for (i = 0; i < priv->feat->num_planes; i++) { - priv->base_vid[i] = dev_remap_addr_index(dev, i + 2); + priv->base_vid[i] = dev_remap_addr_name(dev, priv->feat->vid_name[i]); if (!priv->base_vid[i]) return -EINVAL; } @@ -841,8 +841,8 @@ static int tidss_drv_probe(struct udevice *dev)
/* video port address clocks and enable */ for (i = 0; i < priv->feat->num_vps; i++) { - priv->base_ovr[i] = dev_remap_addr_index(dev, i + 4); - priv->base_vp[i] = dev_remap_addr_index(dev, i + 6); + priv->base_ovr[i] = dev_remap_addr_name(dev, priv->feat->ovr_name[i]); + priv->base_vp[i] = dev_remap_addr_name(dev, priv->feat->vp_name[i]); }
ret = clk_get_by_name(dev, "vp1", &priv->vp_clk[0]);