Hello Breno,
Am 16.01.2018 um 15:36 schrieb Breno Matheus Lima:
Hi Jim,
2018-01-16 10:47 GMT-02:00 Heiko Schocher hs@denx.de:
Hello Fabio,
Am 16.01.2018 um 12:50 schrieb Fabio Estevam:
Hi Heiko,
On Tue, Jan 16, 2018 at 3:29 AM, Heiko Schocher hs@denx.de wrote:
And some Tested-by would be helpful ...
@Stefano, @Fabio: Any chance to test this change? Thanks!
Breno on Cc will do a quick test on this one.
I tested your patch on a mx6sabresd board and U-Boot is hanging in power_init_board():
U-Boot SPL 2018.01-39204-g3244ca3 (Jan 16 2018 - 12:13:25) Trying to boot from MMC1
U-Boot 2018.01-39204-g3244ca3 (Jan 16 2018 - 12:13:25 -0200)
CPU: Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz) CPU: Automotive temperature grade (-40C to 125C) at 25C Reset cause: POR Board: MX6-SabreSD I2C: ready DRAM: 1 GiB
With DEBUG mode enabled I'm getting the following output:
U-Boot 2018.01-39204-g3244ca3-dirty (Jan 16 2018 - 12:24:34 -0200)
CPU: Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz) CPU: Automotive temperature grade (-40C to 125C) at 36C Reset cause: POR Board: MX6-SabreSD I2C: ready DRAM: 1 GiB pmic_alloc: new pmic struct: 0x4f56e1e8 pmic_get: pmic PFUZE100 -> 0x4f56e1e8 i2c_write_data: chip=0x8, len=0x0 write_data:
I also tested on a mx7dsabresd and on this board your patch is working fine. If you need more details please let me know.
Many thanks for testing!
bye, Heiko