Le mercredi 08 octobre 2008 à 10:54 +0200, Remy Bohmer a écrit :
I made it 2 seperate patches. The 1st of this series is fully tested and correct on at least the AT91SAM9261 cores. I hope it fixes the known problems on AT91SAM9263 (and other) cores also, maybe Stelian can verify this. If it does not help on sam9263, it should not make it worse either...
It still doesn't help (on AT91SAM9263):
usb start (Re)start USB... USB: scanning bus for devices... New Device 0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x40 set address 1 usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1 index 0x0 length 0x0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x12 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x9 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x19 get_conf_no 0 Result 25, wLength 25 if 0, ep 0 ##EP epmaxpacketin[1] = 2 set configuration 1 usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length 0x0 new device strings: Mfr=0, Product=1, SerialNumber=0 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0 length 0xFF USB device number 1 default language ID 0x409 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x409 length 0xFF Manufacturer Product OHCI Root Hub SerialNumber usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x4 usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0 length 0x9 usb_control_msg: request: 0x0, requesttype: 0xA0, value 0x0 index 0x0 length 0x4 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x2 length 0x0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length 0x4 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x2 length 0x4 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x2 length 0x4 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x10 index 0x2 length 0x0 usb_control_msg: request: 0x3, requesttype: 0x23, value 0x4 index 0x2 length 0x0 usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x2 length 0x4 usb_control_msg: request: 0x1, requesttype: 0x23, value 0x14 index 0x2 length 0x0 New Device 1 usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x40 ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5) ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5) usb_new_device: usb_get_descriptor() failed usb_control_msg: request: 0x1, requesttype: 0x23, value 0x1 index 0x2 length 0x0 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found U-Boot>