From: Peng Fan peng.fan@nxp.com
Move SP to end of OCRAM space. Drop MALLOC_F to make it alloc from stack space.
Signed-off-by: Peng Fan peng.fan@nxp.com --- drivers/power/power_i2c.c | 8 ++++---- include/configs/imx8mn_evk.h | 9 +++------ 2 files changed, 7 insertions(+), 10 deletions(-)
diff --git a/drivers/power/power_i2c.c b/drivers/power/power_i2c.c index 5a0455e119..b67ac2f027 100644 --- a/drivers/power/power_i2c.c +++ b/drivers/power/power_i2c.c @@ -23,7 +23,7 @@ int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
if (check_reg(p, reg)) return -EINVAL; -#if defined(CONFIG_DM_I2C) +#if CONFIG_IS_ENABLED(DM_I2C) struct udevice *dev; int ret;
@@ -67,7 +67,7 @@ int pmic_reg_write(struct pmic *p, u32 reg, u32 val) return -EINVAL; }
-#if defined(CONFIG_DM_I2C) +#if CONFIG_IS_ENABLED(DM_I2C) return dm_i2c_write(dev, reg, buf, pmic_i2c_tx_num); #else return i2c_write(pmic_i2c_addr, reg, 1, buf, pmic_i2c_tx_num); @@ -83,7 +83,7 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32 *val) if (check_reg(p, reg)) return -EINVAL;
-#if defined(CONFIG_DM_I2C) +#if CONFIG_IS_ENABLED(DM_I2C) struct udevice *dev;
ret = i2c_get_chip_for_busnum(p->bus, pmic_i2c_addr, @@ -131,7 +131,7 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32 *val) int pmic_probe(struct pmic *p) { debug("Bus: %d PMIC:%s probed!\n", p->bus, p->name); -#if defined(CONFIG_DM_I2C) +#if CONFIG_IS_ENABLED(DM_I2C) struct udevice *dev; int ret;
diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h index a6333085fe..61db244e98 100644 --- a/include/configs/imx8mn_evk.h +++ b/include/configs/imx8mn_evk.h @@ -20,17 +20,14 @@ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x95fff0 -#define CONFIG_SPL_BSS_START_ADDR 0x00950000 -#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */ +#define CONFIG_SPL_STACK 0x980000 +#define CONFIG_SPL_BSS_START_ADDR 0x950000 +#define CONFIG_SPL_BSS_MAX_SIZE SZ_4K /* 8 KB */ #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ #define CONFIG_SYS_ICACHE_OFF #define CONFIG_SYS_DCACHE_OFF
-/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x00940000 - /* For RAW image gives a error info not panic */ #define CONFIG_SPL_ABORT_ON_RAW_IMAGE