14 Aug
2018
14 Aug
'18
1:56 a.m.
On Fri, Aug 03, 2018 at 12:10:49PM +0300, Eugen Hristev wrote:
In case the slow clock is not properly configured, the UTMI clock cannot lock the PLL, because UPLLCOUNT will "wait X slow clock cycles". In this case U-boot will loop indefinitely. Added a timeout in this case, to start U-boot even if UTMI clock is not enabled, so the user can use different media if needed, or investigate.
Signed-off-by: Eugen Hristev eugen.hristev@microchip.com
Applied to u-boot/master, thanks!
--
Tom