Jagan,
I am resending as you suggest -- except I used "v2", because it seems that Heiko made the previous versions of "[PATCH] I2C:Zynq: Adapt this driver to the new model" disappear from the list. Therefore the "v1" was this: "[PATCH] I2C: Zynq: Support for 0-length register address".
However, none of that really matters much, because all of the above has been collected into the series I'm (re)sending now.
Michael Burr // Software Engineer II
Logic PD T // 612.436.7273 NOTICE: Important disclaimers and limitations apply to this email. Please see this web page for our disclaimers and limitations: http://logicpd.com/email-disclaimer/
-----Original Message----- From: Jagan Teki [mailto:jagannadh.teki@gmail.com] Sent: Tuesday, October 15, 2013 7:05 AM To: Heiko Schocher Cc: Michael Burr; u-boot@lists.denx.de Subject: Re: [U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model
On Tue, Oct 15, 2013 at 11:29 AM, Heiko Schocher hs@denx.de wrote:
Hello Michal,
Am 14.10.2013 18:25, schrieb Michael Burr:
CONFIGs and README for driver 'zynq_i2c.c'.
Signed-off-by: Michael Burrmichael.burr@logicpd.com Cc: Heiko Schocherhs@denx.de Cc: Michal Simekmonstr@monstr.eu
=== This patch depends on the previous patch titled === "[PATCH] I2C:Zynq: Adapt this driver to the new model" === submitted 26 Sep. 2013.
please squash this patch into the above patch, and add the rename of the drivers config define, and resubmit it, thanks!
And also send the series again with I2C: Zynq: Support for 0-length register address patch as v3 i guess, [you missed v2 patch version name]
Will update the status on testing these on zynq boards.