Signed-off-by: Jon Loeliger jdl@freescale.com --- include/configs/p3mx.h | 43 +++++++++++++++++++----------------- include/configs/p3p440.h | 47 +++++++++++++++++++++------------------ include/configs/pb1x00.h | 31 ++++++++++++++++++------- include/configs/pcs440ep.h | 49 +++++++++++++++++++++-------------------- include/configs/pcu_e.h | 26 +++++++++++----------- include/configs/pdnb3.h | 33 +++++++++++++-------------- include/configs/pleb2.h | 12 ++++++--- include/configs/ppmc7xx.h | 45 ++++++++++++++++++++------------------ include/configs/ppmc8260.h | 29 +++++++++++++----------- include/configs/purple.h | 10 ++++++- include/configs/pxa255_idp.h | 14 ++++++++--- 11 files changed, 190 insertions(+), 149 deletions(-)
diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h index 54462f0..6994f7b 100644 --- a/include/configs/p3mx.h +++ b/include/configs/p3mx.h @@ -253,24 +253,27 @@ #define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ CONFIG_BOOTP_BOOTFILESIZE) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_PCI | \ - CFG_CMD_CACHE | \ - CFG_CMD_SDRAM) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_PCI +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_SDRAM +
/*----------------------------------------------------------------------- * Miscellaneous configurable options @@ -280,7 +283,7 @@
#define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -421,7 +424,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index 22f9f84..2a42961 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -168,25 +168,28 @@
#define CONFIG_NETCONSOLE /* include NetConsole support */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_EEPROM | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_SNTP +
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -195,7 +198,7 @@ *----------------------------------------------------------------------*/ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -304,7 +307,7 @@ */ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif
@@ -316,7 +319,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index ed1893f..c84795b 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -132,11 +132,8 @@ /*---USB -------------------------------------------*/ #if 0 #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE #define CONFIG_DOS_PARTITION -#else -#define ADD_USB_CMD 0 #endif
/*---ATA PCMCIA ------------------------------------*/ @@ -179,11 +176,27 @@ #define CFG_ICACHE_SIZE 16384 #define CFG_CACHELINE_SIZE 32
-#define CONFIG_COMMANDS \ - (((CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_ELF | CFG_CMD_MII | CFG_CMD_PING) & \ - ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | CFG_CMD_IDE | \ - CFG_CMD_LOADS | CFG_CMD_RUN | CFG_CMD_LOADB | CFG_CMD_ELF | \ - CFG_CMD_BDI | CFG_CMD_BEDBUG)) | ADD_USB_CMD) -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + +#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_FAT +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IDE +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_RUN +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_BEDBUG
#endif /* __CONFIG_H */ diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 751b512..f0cd8d3 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -208,37 +208,38 @@ #define CONFIG_HW_WATCHDOG /* watchdog */ #endif
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CFG_CMD_EXT2 | \ - CFG_CMD_FAT | \ - CFG_CMD_USB )
+/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_USB
-#define CONFIG_SUPPORT_VFAT
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_SUPPORT_VFAT
/* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -393,7 +394,7 @@ */ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif
@@ -405,7 +406,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/pcu_e.h b/include/configs/pcu_e.h index 73aa3a8..1174e1a 100644 --- a/include/configs/pcu_e.h +++ b/include/configs/pcu_e.h @@ -89,28 +89,28 @@ * ---------------------------------------------------------------- */ #define CFG_SPI_INIT_OFFSET 0xB00
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP )
-#define CONFIG_BOOTP_MASK \ - ((CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) & ~CONFIG_BOOTP_GATEWAY) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h>
-/*----------------------------------------------------------------------*/ +#define CONFIG_BOOTP_MASK \ + ((CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) & ~CONFIG_BOOTP_GATEWAY)
/* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h index 06c6652..5d6e169 100644 --- a/include/configs/pdnb3.h +++ b/include/configs/pdnb3.h @@ -71,25 +71,24 @@ #define CONFIG_BAUDRATE 115200 #define CFG_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */
-#if defined(CONFIG_SCPU) -#define CMD_NAND_ADD 0 -#else -#define CMD_NAND_ADD CFG_CMD_NAND + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_I2C +#define CONFIG_CMD_ELF +#define CONFIG_CMD_PING + +#if !defined(CONFIG_SCPU) +#define CONFIG_CMD_NAND #endif
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_DATE | \ - CFG_CMD_NET | \ - CFG_CMD_MII | \ - CMD_NAND_ADD | \ - CFG_CMD_I2C | \ - CFG_CMD_ELF | \ - CFG_CMD_PING) - -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -/* These are u-boot generic parameters */ -#include <cmd_confdefs.h>
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h index a6c2371..f581fe5 100644 --- a/include/configs/pleb2.h +++ b/include/configs/pleb2.h @@ -66,10 +66,14 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_NET)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_NET +
#define CONFIG_BOOTDELAY 3 #define CONFIG_ETHADDR 08:00:3e:26:0a:5b @@ -83,7 +87,7 @@ #define CONFIG_INITRD_TAG #define CONFIG_SETUP_MEMORY_TAGS
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h index 072b9dd..6a3bd33 100644 --- a/include/configs/ppmc7xx.h +++ b/include/configs/ppmc7xx.h @@ -53,29 +53,35 @@ /* * Monitor configuration * - * CONFIG_COMMANDS - List of command sets to include in shell + * List of command sets to include in shell * * The following command sets have been tested and known to work: * - * CFG_CMD_CACHE - Cache control commands - * CFG_CMD_MEMORY - Memory display, change and test commands - * CFG_CMD_FLASH - Erase and program flash - * CFG_CMD_ENV - Environment commands - * CFG_CMD_RUN - Run commands stored in env vars - * CFG_CMD_ELF - Load ELF files - * CFG_CMD_NET - Networking/file download commands - * CFG_CMD_PING - ICMP Echo Request command - * CFG_CMD_PCI - PCI Bus scanning command + * CMD_CACHE - Cache control commands + * CMD_MEMORY - Memory display, change and test commands + * CMD_FLASH - Erase and program flash + * CMD_ENV - Environment commands + * CMD_RUN - Run commands stored in env vars + * CMD_ELF - Load ELF files + * CMD_NET - Networking/file download commands + * CMD_PIN - ICMP Echo Request command + * CMD_PCI - PCI Bus scanning command */
-#define CONFIG_COMMANDS ( (CFG_CMD_DFL & ~(CFG_CMD_KGDB)) | \ - CFG_CMD_FLASH | \ - CFG_CMD_ENV | \ - CFG_CMD_RUN | \ - CFG_CMD_ELF | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_PCI) +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_ENV +#define CONFIG_CMD_RUN +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_PCI + +#undef CONFIG_CMD_KGDB
/* @@ -149,9 +155,6 @@ */
-#include <cmd_confdefs.h> - - /* * Memory map * diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h index d671dcc..d99da2f 100644 --- a/include/configs/ppmc8260.h +++ b/include/configs/ppmc8260.h @@ -275,14 +275,20 @@ /* Monitor Command Prompt */ #define CFG_PROMPT "=> "
-/* What U-Boot subsytems do you want enabled? */ -#define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ - CFG_CMD_ELF | \ - CFG_CMD_ASKENV | \ - CFG_CMD_REGINFO | \ - CFG_CMD_MEMTEST | \ - CFG_CMD_MII | \ - CFG_CMD_IMMAP) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_MEMTEST +#define CONFIG_CMD_MII +#define CONFIG_CMD_IMMAP + +#undef CONFIG_CMD_KGDB
/* Where do the internal registers live? */ @@ -298,13 +304,10 @@ #define CONFIG_PPMC8260 1 /* on an Wind River PPMC8260 Board */ #define CONFIG_CPM2 1 /* Has a CPM2 */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -477,7 +480,7 @@ */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif
diff --git a/include/configs/purple.h b/include/configs/purple.h index 2ecb7fb..61e18d7 100644 --- a/include/configs/purple.h +++ b/include/configs/purple.h @@ -81,8 +81,14 @@ "" #define CONFIG_BOOTCOMMAND "run flash_self"
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_ELF) -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +
#define CFG_SDRAM_BASE 0x80000000
diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index e5e2772..d7e4e8a 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -102,10 +102,16 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_DHCP )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_DHCP +
#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND "bootm 40000" @@ -192,7 +198,7 @@ /* "protect off" */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif