Hi,
Ugh, this series is for the linux-sunxi 3.4 kernels and should have gone to a different list. Please ignore, I'll remove it from patchwork right away.
Regards,
Hans
On 10/15/2014 11:56 AM, Hans de Goede wrote:
Some fex files contain wrong values, causing stability issues.
Signed-off-by: Hans de Goede hdegoede@redhat.com
drivers/power/axp152.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/drivers/power/axp152.c b/drivers/power/axp152.c index 77132e1..3b8e68f 100644 --- a/drivers/power/axp152.c +++ b/drivers/power/axp152.c @@ -541,15 +541,17 @@ static struct regulator_init_data regl_init_data[AXP152_REGULATOR_COUNT] = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, } },
- [axp152_dcdc3] = { /* Vddr, power on 1.5V, Android from fex */
- [axp152_dcdc3] = { /* Vddr, power on 1.5V, use u-boot value */ .num_consumer_supplies = 1, .consumer_supplies = &axp152_dcdc3_supply, .constraints = {
.min_uV = 1500 * 1000,.max_uV = 1500 * 1000,
.min_uV = 1000 * 1000,.max_uV = 1600 * 1000, .always_on = 1,
.apply_uV = 1,.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
/** We do not allow changing the DRAM voltage, because* of stability, so no REGULATOR_CHANGE_VOLTAGE.*/@@ -622,11 +624,11 @@ static int __init axp_board_init(void)
/* Note we ignore the dcdc2_vol key as dcdc2 is set by the dvfs code */
- ret = script_parser_fetch("target", "dcdc3_vol", &val, sizeof(int));
- if (ret == 0) {
regl_init_data[axp152_dcdc3].constraints.min_uV = val * 1000;regl_init_data[axp152_dcdc3].constraints.max_uV = val * 1000;- }
/*
* Note we ignore the dcdc3_vol key as that sometimes contains wrong* values make the dram unstable, instead we stick with the bootloader* set voltage.*/ret = script_parser_fetch("target", "dcdc4_vol", &val, sizeof(int)); if (ret == 0) {