On 23/10/2012 04:40, Troy Kisky wrote:
This series tries to separate the mii regsisters from the ethernet registers as suggested by Andy Fleming. Then, mx6qsabrelite is changed to find the phy address from the possibles 4-7.
The V3 series is very different from V2.
Troy Kisky (9): doc/README.fec_mxc: add documentation net: fec_mxc: delete CONFIG_FEC_MXC_MULTI net: fec_mxc: change fec_mii_setspeed parameter net: fec_mxc: have fecmxc_initialize call fecmxc_initialize_multi phy: add phy_find_by_mask/phy_connect_dev net: fec_mxc: use fec_set_dev_name to set name net: fec_mxc: only call phy_connect in fec_probe net: fec_mxc: get phydev before fec_probe mx6qsabrelite: search mii phy address 4-7
Hi Joe,
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 24 +++- doc/README.fec_mxc | 27 ++++ drivers/net/fec_mxc.c | 164 ++++++++++++++----------- drivers/net/fec_mxc.h | 2 +- drivers/net/phy/phy.c | 128 +++++++++++-------- include/configs/m28evk.h | 1 - include/configs/mx28evk.h | 1 - include/configs/sc_sps_1.h | 1 - include/netdev.h | 7 ++ include/phy.h | 3 + 10 files changed, 227 insertions(+), 131 deletions(-) create mode 100644 doc/README.fec_mxc
Patches are assigned to me in patchworks. Do you have any issue with this patchset ? If it is ok for you, I will apply it to u-boot-imx.
Best regards, Stefano