From: Fabio Estevam festevam@denx.de
Sync imx8mm.dtsi with Linux 6.3.
The motivation for doing this sync was a bug when doing "ums 0 mmc 1" on imx8mm-evk. It worked well for the first time, but after doing a CTRL+C and launching the ums again, the command did not work.
Adam Ford suggested to sync imx8mm.dtsi with the Linux dts, as there was a recent USB power domain reorganization there.
After syncing the imx8mm.dtsi with Linux, the ums command works without problem after a CTRL+C.
Suggested-by: Adam Ford aford173@gmail.com Signed-off-by: Fabio Estevam festevam@denx.de --- arch/arm/dts/imx8mm.dtsi | 52 +++++++++++++++++++++++++++++----------- 1 file changed, 38 insertions(+), 14 deletions(-)
diff --git a/arch/arm/dts/imx8mm.dtsi b/arch/arm/dts/imx8mm.dtsi index afb90f59c83c..31f4548f85cf 100644 --- a/arch/arm/dts/imx8mm.dtsi +++ b/arch/arm/dts/imx8mm.dtsi @@ -139,6 +139,7 @@ A53_L2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; cache-size = <0x80000>; cache-line-size = <64>; cache-sets = <512>; @@ -276,6 +277,7 @@ assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; clock-names = "main_clk"; + power-domains = <&pgc_otg1>; };
usbphynop2: usbphynop2 { @@ -285,6 +287,7 @@ assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; clock-names = "main_clk"; + power-domains = <&pgc_otg2>; };
soc: soc@0 { @@ -493,6 +496,8 @@ compatible = "fsl,imx8mm-tmu"; reg = <0x30260000 0x10000>; clocks = <&clk IMX8MM_CLK_TMU_ROOT>; + nvmem-cells = <&tmu_calib>; + nvmem-cell-names = "calib"; #thermal-sensor-cells = <0>; };
@@ -547,8 +552,8 @@ reg = <0x30330000 0x10000>; };
- gpr: iomuxc-gpr@30340000 { - compatible = "fsl,imx8mm-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon"; + gpr: syscon@30340000 { + compatible = "fsl,imx8mm-iomuxc-gpr", "syscon"; reg = <0x30340000 0x10000>; };
@@ -560,22 +565,40 @@ #address-cells = <1>; #size-cells = <1>;
- imx8mm_uid: unique-id@410 { + /* + * The register address below maps to the MX8M + * Fusemap Description Table entries this way. + * Assuming + * reg = <ADDR SIZE>; + * then + * Fuse Address = (ADDR * 4) + 0x400 + * Note that if SIZE is greater than 4, then + * each subsequent fuse is located at offset + * +0x10 in Fusemap Description Table (e.g. + * reg = <0x4 0x8> describes fuses 0x410 and + * 0x420). + */ + imx8mm_uid: unique-id@4 { /* 0x410-0x420 */ reg = <0x4 0x8>; };
- cpu_speed_grade: speed-grade@10 { + cpu_speed_grade: speed-grade@10 { /* 0x440 */ reg = <0x10 4>; };
- fec_mac_address: mac-address@90 { + tmu_calib: calib@3c { /* 0x4f0 */ + reg = <0x3c 4>; + }; + + fec_mac_address: mac-address@90 { /* 0x640 */ reg = <0x90 6>; }; };
- anatop: anatop@30360000 { - compatible = "fsl,imx8mm-anatop", "syscon"; + anatop: clock-controller@30360000 { + compatible = "fsl,imx8mm-anatop"; reg = <0x30360000 0x10000>; + #clock-cells = <1>; };
snvs: snvs@30370000 { @@ -674,13 +697,11 @@ pgc_otg1: power-domain@2 { #power-domain-cells = <0>; reg = <IMX8MM_POWER_DOMAIN_OTG1>; - power-domains = <&pgc_hsiomix>; };
pgc_otg2: power-domain@3 { #power-domain-cells = <0>; reg = <IMX8MM_POWER_DOMAIN_OTG2>; - power-domains = <&pgc_hsiomix>; };
pgc_gpumix: power-domain@4 { @@ -1186,7 +1207,7 @@ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; phys = <&usbphynop1>; fsl,usbmisc = <&usbmisc1 0>; - power-domains = <&pgc_otg1>; + power-domains = <&pgc_hsiomix>; status = "disabled"; };
@@ -1206,7 +1227,7 @@ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; phys = <&usbphynop2>; fsl,usbmisc = <&usbmisc2 0>; - power-domains = <&pgc_otg2>; + power-domains = <&pgc_hsiomix>; status = "disabled"; };
@@ -1238,16 +1259,15 @@ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; #dma-cells = <1>; dma-channels = <4>; clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; };
- gpmi: nand-controller@33002000{ + gpmi: nand-controller@33002000 { compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand"; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; reg = <0x33002000 0x2000>, <0x33004000 0x4000>; reg-names = "gpmi-nand", "bch"; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; @@ -1282,6 +1302,10 @@ <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; fsl,max-link-speed = <2>; linux,pci-domain = <0>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, + <&clk IMX8MM_CLK_PCIE1_PHY>, + <&clk IMX8MM_CLK_PCIE1_AUX>; + clock-names = "pcie", "pcie_bus", "pcie_aux"; power-domains = <&pgc_pcie>; resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;