The board has two SD card slots and we have two defconfigs for booting from either the first (micro SD) named 'sam9x60_curiosity_mmc_defconfig' or the second (full size SD) named 'sam9x60_curiosity_mmc1_defconfig'. For comparable Microchip boards (sama5d27-som1-ek, sama5d29-curiosity, sama7g5ek) with two card slots the defconfigs only differ in BOOTARGS, BOOTCOMMAND, and ENV_FAT_DEVICE_AND_PART and the same should be the case for sam9x60_curiosity.
Here the 'mmc1' config has more options enabled to support the raw NAND flash populated on the board, so the 'mmc' config (for mmc0) was adapted by enabling additional options, instead of removing options from mmc1.
Signed-off-by: Alexander Dahl ada@thorsis.com --- configs/sam9x60_curiosity_mmc_defconfig | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/configs/sam9x60_curiosity_mmc_defconfig b/configs/sam9x60_curiosity_mmc_defconfig index 10937d67d7..269f015989 100644 --- a/configs/sam9x60_curiosity_mmc_defconfig +++ b/configs/sam9x60_curiosity_mmc_defconfig @@ -23,7 +23,7 @@ CONFIG_FIT=y CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="mem=128M console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait" +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait" CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x21000000 at91-sam9x60_curiosity.dtb; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y @@ -38,6 +38,8 @@ CONFIG_CMD_DM=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_NAND_TRIMFFS=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y @@ -50,6 +52,8 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_FAT=y CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y CONFIG_CLK=y CONFIG_CLK_CCF=y CONFIG_CLK_AT91=y @@ -60,10 +64,17 @@ CONFIG_CPU=y CONFIG_AT91_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_AT91=y +CONFIG_ATMEL_EBI=y +CONFIG_MFD_ATMEL_SMC=y CONFIG_I2C_EEPROM=y CONFIG_MICROCHIP_FLEXCOM=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ATMEL=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_MTD_RAW_NAND=y +CONFIG_DM_NAND_ATMEL=y +CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_PHY_MICREL=y CONFIG_MACB=y CONFIG_PINCTRL=y @@ -71,6 +82,8 @@ CONFIG_PINCTRL_AT91=y CONFIG_DM_SERIAL=y CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y +CONFIG_SYSRESET=y +CONFIG_SYSRESET_AT91=y CONFIG_TIMER=y CONFIG_MCHP_PIT64B_TIMER=y CONFIG_W1=y