Signed-off-by: Aneesh V aneesh@ti.com Signed-off-by: Daniel Schwierzeck daniel.schwierzeck@googlemail.com --- Changes since RFC v1: - added documentation for SPL
Changes since RFC v2: - renamed CONFIG_SYS_SPL_LDSCRIPT to CONFIG_SPL_LDSCRIPT - added missing documentation for CONFIG_SPL_LDSCRIPT
README | 39 +++++++++++++++++++++ doc/README.SPL | 60 +++++++++++++++++++++++++++++++++ spl/.gitignore | 4 ++ spl/Makefile | 101 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 204 insertions(+), 0 deletions(-) create mode 100644 doc/README.SPL create mode 100644 spl/.gitignore create mode 100644 spl/Makefile
diff --git a/README b/README index 1e2d4d3..8cac56c 100644 --- a/README +++ b/README @@ -2236,6 +2236,45 @@ FIT uImage format: Adds the MTD partitioning infrastructure from the Linux kernel. Needed for UBI support.
+- SPL framework + CONFIG_SPL + Enable building of SPL globally. + + CONFIG_SPL_TEXT_BASE + TEXT_BASE for linking the SPL binary. + + CONFIG_SPL_LDSCRIPT + LDSCRIPT for linking the SPL binary. + + CONFIG_SPL_LIBCOMMON_SUPPORT + Support for common/libcommon.o in SPL binary + + CONFIG_SPL_LIBDISK_SUPPORT + Support for disk/libdisk.o in SPL binary + + CONFIG_SPL_I2C_SUPPORT + Support for drivers/i2c/libi2c.o in SPL binary + + CONFIG_SPL_GPIO_SUPPORT + Support for drivers/gpio/libgpio.o in SPL binary + + CONFIG_SPL_MMC_SUPPORT + Support for drivers/mmc/libmmc.o in SPL binary + + CONFIG_SPL_SERIAL_SUPPORT + Support for drivers/serial/libserial.o in SPL binary + + CONFIG_SPL_SPI_FLASH_SUPPORT + Support for drivers/mtd/spi/libspi_flash.o in SPL binary + + CONFIG_SPL_SPI_SUPPORT + Support for drivers/spi/libspi.o in SPL binary + + CONFIG_SPL_FAT_SUPPORT + Support for fs/fat/libfat.o in SPL binary + + CONFIG_SPL_LIBGENERIC_SUPPORT + Support for lib/libgeneric.o in SPL binary
Modem Support: -------------- diff --git a/doc/README.SPL b/doc/README.SPL new file mode 100644 index 0000000..3afe28f --- /dev/null +++ b/doc/README.SPL @@ -0,0 +1,60 @@ +Generic SPL framework +===================== + +Overview +-------- + +To unify all existing implementations for a secondary program loader (SPL) +and to allow simply adding of new implementations this generic SPL framework +have been created. With this framework almost all source files for a board +can be reused. No code duplication or symlinking is necessary anymore. + + +How it works +------------ + +There is a new directory TOPDIR/spl which contains only a Makefile. +All source files needed by SPL are recompiled inside this directory +and linked to the final binaries named u-boot-spl[.bin|.map]. + +During the SPL build a variable named CONFIG_SPL_BUILD is exported +in the make environment and also appended to CPPFLAGS with -DCONFIG_SPL_BUILD. +Thus makefiles and source files are able to build things differently for SPL. + +For example: + +ifeq ($(CONFIG_SPL_BUILD),y) +COBJS-y += board_spl.o +else +COBJS-y += board.o +endif + +COBJS-$(CONFIG_SPL_BUILD) += foo.o + +#ifdef CONFIG_SPL_BUILD + foo(); +#endif + + +The building of SPL images can be with: + +#define CONFIG_SPL + +Because SPL images normally have a different test base, one have to be +configured by defining CONFIG_SPL_TEXT_BASE. The linker script have to be +defined with CONFIG_SPL_LDSCRIPT. + +To support generic U-Boot libraries and drivers in the SPL binary one can +optionally define CONFIG_SPL_XXX_SUPPORT. Currently following options +are supported: + +CONFIG_SPL_LIBCOMMON_SUPPORT (common/libcommon.o) +CONFIG_SPL_LIBDISK_SUPPORT (disk/libdisk.o) +CONFIG_SPL_I2C_SUPPORT (drivers/i2c/libi2c.o) +CONFIG_SPL_GPIO_SUPPORT (drivers/gpio/libgpio.o) +CONFIG_SPL_MMC_SUPPORT (drivers/mmc/libmmc.o) +CONFIG_SPL_SERIAL_SUPPORT (drivers/serial/libserial.o) +CONFIG_SPL_SPI_FLASH_SUPPORT (drivers/mtd/spi/libspi_flash.o) +CONFIG_SPL_SPI_SUPPORT (drivers/spi/libspi.o) +CONFIG_SPL_FAT_SUPPORT (fs/fat/libfat.o) +CONFIG_SPL_LIBGENERIC_SUPPORT (lib/libgeneric.o) diff --git a/spl/.gitignore b/spl/.gitignore new file mode 100644 index 0000000..7c88147 --- /dev/null +++ b/spl/.gitignore @@ -0,0 +1,4 @@ +u-boot-spl +u-boot-spl.bin +u-boot-spl.lds +u-boot-spl.map diff --git a/spl/Makefile b/spl/Makefile new file mode 100644 index 0000000..bc24c3b --- /dev/null +++ b/spl/Makefile @@ -0,0 +1,101 @@ +# +# (C) Copyright 2000-2011 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2011 +# Daniel Schwierzeck, daniel.schwierzeck@googlemail.com. +# +# (C) Copyright 2011 +# Texas Instruments Incorporated - http://www.ti.com/ +# Aneesh V aneesh@ti.com +# +# This file is released under the terms of GPL v2 and any later version. +# See the file COPYING in the root directory of the source tree for details. +# +# Based on top-level Makefile. +# + +CONFIG_SPL_BUILD := y +export CONFIG_SPL_BUILD + +include $(TOPDIR)/config.mk + +# We want the final binaries in this directory +obj := $(OBJTREE)/spl/ + +HAVE_VENDOR_COMMON_LIB := $(shell [ -f $(SRCTREE)/board/$(VENDOR)/common/Makefile ] \ + && echo y || echo n) + +START := $(CPUDIR)/start.o + +LIBS-y += arch/$(ARCH)/lib/lib$(ARCH).o +LIBS-y += $(CPUDIR)/lib$(CPU).o +ifdef SOC +LIBS-y += $(CPUDIR)/$(SOC)/lib$(SOC).o +endif +LIBS-y += board/$(BOARDDIR)/lib$(BOARD).o +LIBS-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/lib$(VENDOR).o + +START := $(addprefix $(SPLTREE)/,$(START)) +LIBS := $(addprefix $(SPLTREE)/,$(sort $(LIBS-y))) + +__START := $(subst $(obj),,$(START)) +__LIBS := $(subst $(obj),,$(LIBS)) + +# Linker Script +ifdef CONFIG_SPL_LDSCRIPT +# need to strip off double quotes +LDSCRIPT := $(addprefix $(SRCTREE)/,$(subst ",,$(CONFIG_SPL_LDSCRIPT))) +endif + +ifeq ($(wildcard $(LDSCRIPT)),) + LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-spl.lds +endif +ifeq ($(wildcard $(LDSCRIPT)),) + LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-spl.lds +endif +ifeq ($(wildcard $(LDSCRIPT)),) +$(error could not find linker script) +endif + +# Special flags for CPP when processing the linker script. +# Pass the version down so we can handle backwards compatibility +# on the fly. +LDPPFLAGS += \ + -include $(TOPDIR)/include/u-boot/u-boot.lds.h \ + -include $(OBJTREE)/include/config.h \ + $(shell $(LD) --version | \ + sed -ne 's/GNU ld version ([0-9][0-9]*).([0-9][0-9]*).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') + +ALL-y += $(obj)u-boot-spl.bin + +all: $(ALL-y) + +$(obj)u-boot-spl.bin: $(obj)u-boot-spl + $(OBJCOPY) $(OBJCFLAGS) -O binary $< $@ + +GEN_UBOOT = \ + UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) | \ + sed -n -e 's/.*($(SYM_PREFIX)__u_boot_cmd_.*)/-u\1/p'|sort|uniq`;\ + cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $$UNDEF_SYM $(__START) \ + --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ + -Map u-boot-spl.map -o u-boot-spl + +$(obj)u-boot-spl: depend $(START) $(LIBS) $(obj)u-boot-spl.lds + $(GEN_UBOOT) + +$(START): depend + $(MAKE) -C $(SRCTREE)/$(CPUDIR) $@ + +$(LIBS): depend + $(MAKE) -C $(SRCTREE)$(dir $(subst $(SPLTREE),,$@)) + +$(obj)u-boot-spl.lds: $(LDSCRIPT) depend + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - < $< > $@ + +depend: $(obj).depend +.PHONY: depend + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk +