Hi Jagan,
Love this patch! This was long overdue.
On 01/27/2017 07:12 AM, Jagan Teki wrote:
Use meaningful meacros IMX6_BMODE_*, instead of numerical number in boot mode detection code.
s/meacros/macros/
Cc: Stefano Babic sbabic@denx.de Cc: Tim Harvey tharvey@gateworks.com Signed-off-by: Jagan Teki jagan@openedev.com
arch/arm/imx-common/spl.c | 39 ++++++++++++++++++----------- arch/arm/include/asm/imx-common/sys_proto.h | 34 +++++++++++++++++++++++++ 2 files changed, 58 insertions(+), 15 deletions(-)
diff --git a/arch/arm/imx-common/spl.c b/arch/arm/imx-common/spl.c index fc3704b..38789b2 100644 --- a/arch/arm/imx-common/spl.c +++ b/arch/arm/imx-common/spl.c @@ -30,39 +30,48 @@ u32 spl_boot_device(void) if ((((bmode >> 24) & 0x03) == 0x01) || /* Serial Downloader */ (imx6_is_bmode_from_gpr9() && (reg == 1))) return BOOT_DEVICE_UART;
- /* BOOT_CFG1[7:4] - see IMX6DQRM Table 8-8 */
- switch ((reg & 0x000000FF) >> 4) {
- switch ((reg & IMX6_BMODE_MASK) >> IMX6_BMODE_SHIFT) { /* EIM: See 8.5.1, Table 8-9 */
- case 0x0:
- case IMX6_BMODE_EMI: /* BOOT_CFG1[3]: NOR/OneNAND Selection */
if ((reg & 0x00000008) >> 3)
switch ((reg & IMX6_BMODE_EMI_MASK) >> IMX6_BMODE_EMI_SHIFT) {case IMX6_BMODE_ONENAND: return BOOT_DEVICE_ONENAND;
else
case IMX6_BMODE_NOR: return BOOT_DEVICE_NOR;
break;
}
- case 0x2:
- case IMX6_BMODE_SATA: return BOOT_DEVICE_SATA; /* Serial ROM: See 8.5.5.1, Table 8-22 */
- case 0x3:
- case IMX6_BMODE_SERIAL: /* BOOT_CFG4[2:0] */
switch ((reg & 0x07000000) >> 24) {case 0x0 ... 0x4:
switch ((reg & IMX6_BMODE_SERIAL_MASK) >>IMX6_BMODE_SERIAL_SHIFT) {case IMX6_BMODE_ECSPI1:case IMX6_BMODE_ECSPI2:case IMX6_BMODE_ECSPI3:case IMX6_BMODE_ECSPI4:case IMX6_BMODE_ECSPI5: return BOOT_DEVICE_SPI;
case 0x5 ... 0x7:
case IMX6_BMODE_I2C1:case IMX6_BMODE_I2C2:case IMX6_BMODE_I2C3: return BOOT_DEVICE_I2C;
- case 0x4:
- case 0x5:
- case IMX6_BMODE_SD:
- case IMX6_BMODE_ESD: return BOOT_DEVICE_MMC1; /* MMC/eMMC: 8.5.3 */
- case 0x6:
- case 0x7:
- case IMX6_BMODE_MMC:
- case IMX6_BMODE_EMMC: return BOOT_DEVICE_MMC1; /* NAND Flash: 8.5.2, Table 8-10 */
- case 0x8:
- case IMX6_BMODE_NAND: return BOOT_DEVICE_NAND; } return BOOT_DEVICE_NONE;
diff --git a/arch/arm/include/asm/imx-common/sys_proto.h b/arch/arm/include/asm/imx-common/sys_proto.h index 99e3869..d0cf3f1 100644 --- a/arch/arm/include/asm/imx-common/sys_proto.h +++ b/arch/arm/include/asm/imx-common/sys_proto.h @@ -42,6 +42,40 @@ #ifdef CONFIG_MX6 #define IMX6_SRC_GPR10_BMODE BIT(28)
+#define IMX6_BMODE_MASK GENMASK(7, 0)
This is a number (4), not a mask:
+#define IMX6_BMODE_SHIFT BIT(2) +#define IMX6_BMODE_EMI_MASK BIT(3)
Ditto (number, not mask):
+#define IMX6_BMODE_EMI_SHIFT GENMASK(1, 0)
Since there's also a "serial download mode", I'd prefer that these say "SERIAL_NOR" to avoid confusion.
+#define IMX6_BMODE_SERIAL_MASK GENMASK(26, 24) +#define IMX6_BMODE_SERIAL_SHIFT GENMASK(4, 3)
I'd prefer macros for these because they'd show the values directly, making a comparison with the RM easier.
+enum imx6_bmode_serial {
- IMX6_BMODE_ECSPI1,
- IMX6_BMODE_ECSPI2,
- IMX6_BMODE_ECSPI3,
- IMX6_BMODE_ECSPI4,
- IMX6_BMODE_ECSPI5,
- IMX6_BMODE_I2C1,
- IMX6_BMODE_I2C2,
- IMX6_BMODE_I2C3,
+};
+enum imx6_bmode_emi {
- IMX6_BMODE_ONENAND,
- IMX6_BMODE_NOR,
+};
+enum imx6_bmode {
- IMX6_BMODE_EMI,
Especially when doing things like this:
- IMX6_BMODE_SATA = 0x2,
- IMX6_BMODE_SERIAL,
- IMX6_BMODE_SD,
- IMX6_BMODE_ESD,
- IMX6_BMODE_MMC,
- IMX6_BMODE_EMMC,
- IMX6_BMODE_NAND,
+};
static inline u8 imx6_is_bmode_from_gpr9(void) { struct src *psrc = (struct src *)SRC_BASE_ADDR;