Add support for the new Bananapro A20 development board from lemaker.org. This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for OTG, 1 micro USB receptacle for power, HDMI, sata, Gbit ethernet, ir receiver, 3.5 mm jack for a/v out, on board microphone, 40 gpio pins and sdio wifi.
Signed-off-by: Hans de Goede hdegoede@redhat.com --- board/sunxi/Kconfig | 4 ++++ board/sunxi/Makefile | 1 + board/sunxi/gmac.c | 2 +- configs/Bananapro_defconfig | 9 +++++++++ 4 files changed, 15 insertions(+), 1 deletion(-) create mode 100644 configs/Bananapro_defconfig
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 0cbfb26..8782394 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -97,6 +97,10 @@ config TARGET_BANANAPI bool "BANANAPI" depends on MACH_SUN7I
+config TARGET_BANANAPRO + bool "BANANAPRO" + depends on MACH_SUN7I + config TARGET_COLOMBUS bool "COLOMBUS" depends on MACH_SUN6I diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile index 97aff10..8ca01f6 100644 --- a/board/sunxi/Makefile +++ b/board/sunxi/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_TARGET_A20_OLINUXINO_M) += dram_sun7i_384_1024_iow16.o obj-$(CONFIG_TARGET_AUXTEK_T004) += dram_a10s_olinuxino_m.o obj-$(CONFIG_TARGET_BA10_TV_BOX) += dram_sun4i_384_1024_iow8.o obj-$(CONFIG_TARGET_BANANAPI) += dram_bananapi.o +obj-$(CONFIG_TARGET_BANANAPRO) += dram_bananapi.o obj-$(CONFIG_TARGET_CUBIEBOARD) += dram_cubieboard.o obj-$(CONFIG_TARGET_CUBIEBOARD2) += dram_cubieboard2.o obj-$(CONFIG_TARGET_CUBIETRUCK) += dram_cubietruck.o diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c index 571bc9e..4e4615e 100644 --- a/board/sunxi/gmac.c +++ b/board/sunxi/gmac.c @@ -34,7 +34,7 @@ int sunxi_gmac_initialize(bd_t *bis) * need to set bits 10-12 GTXDC "GMAC Transmit Clock Delay Chain" * of the GMAC clk register to 3. */ -#ifdef CONFIG_TARGET_BANANAPI +#if defined CONFIG_TARGET_BANANAPI || defined CONFIG_TARGET_BANANAPRO setbits_le32(&ccm->gmac_clk_cfg, 0x3 << 10); #endif
diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig new file mode 100644 index 0000000..7f9ce13 --- /dev/null +++ b/configs/Bananapro_defconfig @@ -0,0 +1,9 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" +CONFIG_FDTFILE="sun7i-a20-bananapro.dtb" +CONFIG_USB1_VBUS_PIN="PH0" +CONFIG_USB2_VBUS_PIN="PH1" ++S:CONFIG_ARM=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_BANANAPRO=y