Currently, the u-boot zynqmp psgtr driver is not connected to the usb dwc3 driver. Without this, the only way for u-boot to be able to use usb3 is if the psgtr serdes clocking is already enabled in the psu_init_gpl.c. This patch enables the psgtr serdes for usb3 use, so the u-boot dwc3 driver will work properly on boards based on the k24 som.
In addition, this patch correctly configures mio76 and mio77 as gpio pins which are used as reset gpio pins on the kd240 starter kit.
This patch is needed for enabling u-boot to load an OS on the kd240 starter kit by either usb3 or the sd card interface connected over the usb3 to sd card bridge.
Signed-off-by: Neal Frager neal.frager@amd.com --- V1->V2: - rebased patch to latest u-boot master branch - improved git commit message --- .../zynqmp/zynqmp-sm-k24-revA/psu_init_gpl.c | 283 +++++++++++++++++- 1 file changed, 270 insertions(+), 13 deletions(-)
diff --git a/board/xilinx/zynqmp/zynqmp-sm-k24-revA/psu_init_gpl.c b/board/xilinx/zynqmp/zynqmp-sm-k24-revA/psu_init_gpl.c index 166e61431b..591f093752 100644 --- a/board/xilinx/zynqmp/zynqmp-sm-k24-revA/psu_init_gpl.c +++ b/board/xilinx/zynqmp/zynqmp-sm-k24-revA/psu_init_gpl.c @@ -72,6 +72,18 @@ static void dpll_prog(int div2, int ddr_pll_fbdiv, int d_lock_dly, Xil_Out32(((0xFD1A0000U) + 0x0000002C), pll_ctrl_regval); }
+static int serdes_illcalib(u32 lane3_protocol, u32 lane3_rate, + u32 lane2_protocol, u32 lane2_rate, + u32 lane1_protocol, u32 lane1_rate, + u32 lane0_protocol, u32 lane0_rate) +{ + Xil_Out32(0xFD409914, 0xF3); + Xil_Out32(0xFD409940, 0xF3); + Xil_Out32(0xFD409990, 0x20); + Xil_Out32(0xFD409924, 0x37); + return 1; +} + static unsigned long psu_pll_init_data(void) { psu_mask_write(0xFF5E0034, 0xFE7FEDEFU, 0x7E4B0C62U); @@ -528,8 +540,8 @@ static unsigned long psu_mio_init_data(void) psu_mask_write(0xFF180124, 0x000000FEU, 0x00000002U); psu_mask_write(0xFF180128, 0x000000FEU, 0x00000002U); psu_mask_write(0xFF18012C, 0x000000FEU, 0x00000002U); - psu_mask_write(0xFF180130, 0x000000FEU, 0x000000C0U); - psu_mask_write(0xFF180134, 0x000000FEU, 0x000000C0U); + psu_mask_write(0xFF180130, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF180134, 0x000000FEU, 0x00000000U); psu_mask_write(0xFF180204, 0xFFFFFFFFU, 0x50000000U); psu_mask_write(0xFF180208, 0xFFFFFFFFU, 0x00B02020U); psu_mask_write(0xFF18020C, 0x00003FFFU, 0x00000FC0U); @@ -569,21 +581,16 @@ static unsigned long psu_peripherals_init_data(void) psu_mask_write(0xFD1A0100, 0x0001807CU, 0x00000000U); psu_mask_write(0xFF5E0238, 0x001A0000U, 0x00000000U); psu_mask_write(0xFF5E023C, 0x0093C018U, 0x00000000U); - psu_mask_write(0xFF5E0230, 0x00000008U, 0x00000000U); + psu_mask_write(0xFF5E0230, 0x00000002U, 0x00000000U); psu_mask_write(0xFF5E0238, 0x00000001U, 0x00000000U); psu_mask_write(0xFF180390, 0x00000004U, 0x00000004U); psu_mask_write(0xFF5E023C, 0x00000400U, 0x00000000U); - psu_mask_write(0xFF5E0238, 0x00000040U, 0x00000000U); - psu_mask_write(0xFF180310, 0x00008000U, 0x00000000U); - psu_mask_write(0xFF180320, 0x33840000U, 0x02840000U); - psu_mask_write(0xFF18031C, 0x7FFE0000U, 0x64500000U); - psu_mask_write(0xFF180358, 0x00000008U, 0x00000008U); - psu_mask_write(0xFF180324, 0x03C00000U, 0x00000000U); + psu_mask_write(0xFF5E0238, 0x00000080U, 0x00000000U); psu_mask_write(0xFF5E0238, 0x00000400U, 0x00000000U); psu_mask_write(0xFF5E0238, 0x00008000U, 0x00000000U); psu_mask_write(0xFF5E0238, 0x00000010U, 0x00000000U); psu_mask_write(0xFF5E0238, 0x00007800U, 0x00000000U); - psu_mask_write(0xFF5E0238, 0x00000004U, 0x00000000U); + psu_mask_write(0xFF5E0238, 0x00000006U, 0x00000000U); psu_mask_write(0xFF5E0238, 0x00040000U, 0x00000000U); psu_mask_write(0xFF4B0024, 0x000000FFU, 0x000000FFU); psu_mask_write(0xFFCA5000, 0x00001FFFU, 0x00000000U); @@ -591,13 +598,111 @@ static unsigned long psu_peripherals_init_data(void) psu_mask_write(0xFFA60040, 0x80000000U, 0x80000000U); psu_mask_write(0xFF260020, 0xFFFFFFFFU, 0x05F5DD18U); psu_mask_write(0xFF260000, 0x00000001U, 0x00000001U); - psu_mask_write(0xFF5E0250, 0x00000F0FU, 0x00000202U); + psu_mask_write(0xFF0A0284, 0x03FFFFFFU, 0x01000000U); + psu_mask_write(0xFF0A0288, 0x03FFFFFFU, 0x01000000U); + psu_mask_write(0xFF0A0014, 0x03FF03FFU, 0x02FF0100U);
mask_delay(1); - psu_mask_write(0xFF5E0250, 0x00000F0FU, 0x00000002U); + psu_mask_write(0xFF0A0014, 0x03FF03FFU, 0x02FF0000U);
mask_delay(5); - psu_mask_write(0xFF5E0250, 0x00000F0FU, 0x00000202U); + psu_mask_write(0xFF0A0014, 0x03FF03FFU, 0x02FF0100U); + + return 1; +} + +static unsigned long psu_serdes_init_data(void) +{ + psu_mask_write(0xFD410008, 0x0000001FU, 0x00000008U); + psu_mask_write(0xFD402868, 0x00000080U, 0x00000080U); + psu_mask_write(0xFD40A094, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD40A368, 0x000000FFU, 0x00000038U); + psu_mask_write(0xFD40A36C, 0x00000007U, 0x00000003U); + psu_mask_write(0xFD40A370, 0x000000FFU, 0x000000F4U); + psu_mask_write(0xFD40A374, 0x000000FFU, 0x00000031U); + psu_mask_write(0xFD40A378, 0x000000FFU, 0x00000002U); + psu_mask_write(0xFD40A37C, 0x00000033U, 0x00000030U); + psu_mask_write(0xFD40906C, 0x00000003U, 0x00000003U); + psu_mask_write(0xFD4080F4, 0x00000003U, 0x00000003U); + psu_mask_write(0xFD4090CC, 0x00000020U, 0x00000020U); + psu_mask_write(0xFD401074, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD405074, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD409074, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD40D074, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD401994, 0x00000007U, 0x00000007U); + psu_mask_write(0xFD405994, 0x00000007U, 0x00000007U); + psu_mask_write(0xFD40989C, 0x00000080U, 0x00000080U); + psu_mask_write(0xFD4098F8, 0x000000FFU, 0x0000001AU); + psu_mask_write(0xFD4098FC, 0x000000FFU, 0x0000001AU); + psu_mask_write(0xFD409990, 0x000000FFU, 0x00000010U); + psu_mask_write(0xFD409924, 0x000000FFU, 0x000000FEU); + psu_mask_write(0xFD409928, 0x000000FFU, 0x00000000U); + psu_mask_write(0xFD409900, 0x000000FFU, 0x0000001AU); + psu_mask_write(0xFD40992C, 0x000000FFU, 0x00000000U); + psu_mask_write(0xFD409980, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFD409914, 0x000000FFU, 0x000000F7U); + psu_mask_write(0xFD409918, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD409940, 0x000000FFU, 0x000000F7U); + psu_mask_write(0xFD409944, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD409994, 0x00000007U, 0x00000007U); + psu_mask_write(0xFD40D994, 0x00000007U, 0x00000007U); + psu_mask_write(0xFD40107C, 0x0000000FU, 0x00000001U); + psu_mask_write(0xFD40507C, 0x0000000FU, 0x00000001U); + psu_mask_write(0xFD40907C, 0x0000000FU, 0x00000001U); + psu_mask_write(0xFD40D07C, 0x0000000FU, 0x00000001U); + psu_mask_write(0xFD4019A4, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFD401038, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD40102C, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD4059A4, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFD405038, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD40502C, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD4099A4, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFD409038, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD40902C, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD40D9A4, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFD40D038, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD40D02C, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD4019AC, 0x00000003U, 0x00000000U); + psu_mask_write(0xFD4059AC, 0x00000003U, 0x00000000U); + psu_mask_write(0xFD4099AC, 0x00000003U, 0x00000000U); + psu_mask_write(0xFD40D9AC, 0x00000003U, 0x00000000U); + psu_mask_write(0xFD401978, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD405978, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD409978, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD40D978, 0x00000010U, 0x00000010U); + + serdes_illcalib(0, 0, 3, 0, 0, 0, 0, 0); + psu_mask_write(0xFD410014, 0x00000007U, 0x00000003U); + return 1; +} + +static unsigned long psu_resetout_init_data(void) +{ + psu_mask_write(0xFF5E023C, 0x00000400U, 0x00000000U); + psu_mask_write(0xFF9D0080, 0x00000001U, 0x00000001U); + psu_mask_write(0xFF9D007C, 0x00000001U, 0x00000000U); + psu_mask_write(0xFF5E023C, 0x00000140U, 0x00000000U); + psu_mask_write(0xFF5E0230, 0x00000002U, 0x00000000U); + psu_mask_write(0xFD1A0100, 0x00010000U, 0x00000000U); + psu_mask_write(0xFD4A0200, 0x00000002U, 0x00000000U); + psu_mask_write(0xFD4A0238, 0x0000000FU, 0x00000000U); + psu_mask_write(0xFE20C200, 0x00023FFFU, 0x00022457U); + psu_mask_write(0xFE20C630, 0x003FFF00U, 0x00000000U); + psu_mask_write(0xFE20C11C, 0x00000600U, 0x00000600U); + psu_mask_write(0xFE20C12C, 0x00004000U, 0x00004000U); + psu_mask_write(0xFD480064, 0x00000200U, 0x00000200U); + mask_poll(0xFD40A3E4, 0x00000010U); + + return 1; +} + +static unsigned long psu_resetin_init_data(void) +{ + psu_mask_write(0xFF5E023C, 0x00000540U, 0x00000540U); + psu_mask_write(0xFF5E0230, 0x00000002U, 0x00000002U); + psu_mask_write(0xFD4A0238, 0x0000000FU, 0x0000000AU); + psu_mask_write(0xFD4A0200, 0x00000002U, 0x00000002U); + psu_mask_write(0xFD1A0100, 0x00010000U, 0x00010000U);
return 1; } @@ -911,6 +1016,157 @@ static unsigned long psu_ddr_phybringup_data(void) return 1; }
+static int serdes_enb_coarse_saturation(void) +{ + Xil_Out32(0xFD402094, 0x00000010); + Xil_Out32(0xFD406094, 0x00000010); + Xil_Out32(0xFD40A094, 0x00000010); + Xil_Out32(0xFD40E094, 0x00000010); + return 1; +} + +static int serdes_fixcal_code(void) +{ + int maskstatus = 1; + unsigned int rdata = 0; + unsigned int match_pmos_code[23]; + unsigned int match_nmos_code[23]; + unsigned int match_ical_code[7]; + unsigned int match_rcal_code[7]; + unsigned int p_code = 0; + unsigned int n_code = 0; + unsigned int i_code = 0; + unsigned int r_code = 0; + unsigned int repeat_count = 0; + unsigned int L3_TM_CALIB_DIG20 = 0; + unsigned int L3_TM_CALIB_DIG19 = 0; + unsigned int L3_TM_CALIB_DIG18 = 0; + unsigned int L3_TM_CALIB_DIG16 = 0; + unsigned int L3_TM_CALIB_DIG15 = 0; + unsigned int L3_TM_CALIB_DIG14 = 0; + int i = 0; + + rdata = Xil_In32(0xFD40289C); + rdata = rdata & ~0x03; + rdata = rdata | 0x1; + Xil_Out32(0xFD40289C, rdata); + int count = 0; + do { + if (count == 1100000) + break; + rdata = Xil_In32(0xFD402B1C); + count++; + } while ((rdata & 0x0000000E) != 0x0000000E); + + for (i = 0; i < 23; i++) { + match_pmos_code[i] = 0; + match_nmos_code[i] = 0; + } + for (i = 0; i < 7; i++) { + match_ical_code[i] = 0; + match_rcal_code[i] = 0; + } + + do { + Xil_Out32(0xFD410010, 0x00000000); + Xil_Out32(0xFD410014, 0x00000000); + + Xil_Out32(0xFD410010, 0x00000001); + Xil_Out32(0xFD410014, 0x00000000); + + maskstatus = mask_poll(0xFD40EF14, 0x2); + if (maskstatus == 0) { + xil_printf("#SERDES initialization timed out\n\r"); + return maskstatus; + } + + p_code = mask_read(0xFD40EF18, 0xFFFFFFFF); + n_code = mask_read(0xFD40EF1C, 0xFFFFFFFF); + ; + i_code = mask_read(0xFD40EF24, 0xFFFFFFFF); + r_code = mask_read(0xFD40EF28, 0xFFFFFFFF); + ; + + if (p_code >= 0x26 && p_code <= 0x3C) + match_pmos_code[p_code - 0x26] += 1; + + if (n_code >= 0x26 && n_code <= 0x3C) + match_nmos_code[n_code - 0x26] += 1; + + if (i_code >= 0xC && i_code <= 0x12) + match_ical_code[i_code - 0xC] += 1; + + if (r_code >= 0x6 && r_code <= 0xC) + match_rcal_code[r_code - 0x6] += 1; + + } while (repeat_count++ < 10); + + for (i = 0; i < 23; i++) { + if (match_pmos_code[i] >= match_pmos_code[0]) { + match_pmos_code[0] = match_pmos_code[i]; + p_code = 0x26 + i; + } + if (match_nmos_code[i] >= match_nmos_code[0]) { + match_nmos_code[0] = match_nmos_code[i]; + n_code = 0x26 + i; + } + } + + for (i = 0; i < 7; i++) { + if (match_ical_code[i] >= match_ical_code[0]) { + match_ical_code[0] = match_ical_code[i]; + i_code = 0xC + i; + } + if (match_rcal_code[i] >= match_rcal_code[0]) { + match_rcal_code[0] = match_rcal_code[i]; + r_code = 0x6 + i; + } + } + + L3_TM_CALIB_DIG20 = mask_read(0xFD40EC50, 0xFFFFFFF0); + L3_TM_CALIB_DIG20 = L3_TM_CALIB_DIG20 | 0x8 | ((p_code >> 2) & 0x7); + + L3_TM_CALIB_DIG19 = mask_read(0xFD40EC4C, 0xFFFFFF18); + L3_TM_CALIB_DIG19 = L3_TM_CALIB_DIG19 | ((p_code & 0x3) << 6) + | 0x20 | 0x4 | ((n_code >> 3) & 0x3); + + L3_TM_CALIB_DIG18 = mask_read(0xFD40EC48, 0xFFFFFF0F); + L3_TM_CALIB_DIG18 = L3_TM_CALIB_DIG18 | ((n_code & 0x7) << 5) | 0x10; + + L3_TM_CALIB_DIG16 = mask_read(0xFD40EC40, 0xFFFFFFF8); + L3_TM_CALIB_DIG16 = L3_TM_CALIB_DIG16 | ((r_code >> 1) & 0x7); + + L3_TM_CALIB_DIG15 = mask_read(0xFD40EC3C, 0xFFFFFF30); + L3_TM_CALIB_DIG15 = L3_TM_CALIB_DIG15 | ((r_code & 0x1) << 7) + | 0x40 | 0x8 | ((i_code >> 1) & 0x7); + + L3_TM_CALIB_DIG14 = mask_read(0xFD40EC38, 0xFFFFFF3F); + L3_TM_CALIB_DIG14 = L3_TM_CALIB_DIG14 | ((i_code & 0x1) << 7) | 0x40; + + Xil_Out32(0xFD40EC50, L3_TM_CALIB_DIG20); + Xil_Out32(0xFD40EC4C, L3_TM_CALIB_DIG19); + Xil_Out32(0xFD40EC48, L3_TM_CALIB_DIG18); + Xil_Out32(0xFD40EC40, L3_TM_CALIB_DIG16); + Xil_Out32(0xFD40EC3C, L3_TM_CALIB_DIG15); + Xil_Out32(0xFD40EC38, L3_TM_CALIB_DIG14); + return maskstatus; +} + +static int init_serdes(void) +{ + int status = 1; + + status &= psu_resetin_init_data(); + + status &= serdes_fixcal_code(); + status &= serdes_enb_coarse_saturation(); + + status &= psu_serdes_init_data(); + status &= psu_resetout_init_data(); + + return status; +} + static void init_peripheral(void) { psu_mask_write(0xFD5F0018, 0x8000001FU, 0x8000001FU); @@ -927,6 +1183,7 @@ int psu_init(void) status &= psu_ddr_init_data(); status &= psu_ddr_phybringup_data(); status &= psu_peripherals_init_data(); + status &= init_serdes(); init_peripheral();
status &= psu_afi_config();