TI's DA850/OMAP-L138 platform is similar to DA830/OMAP-L137 in many aspects. So instead of repeating the same code in multiple files, move the common code to a different file and call those functions from the respective da830/da850 files.
Signed-off-by: Sudhakar Rajashekhara sudhakar.raj@ti.com Acked-by: Nick Thompson nick.thompson@ge.com Acked-by: Ben Gardiner bengardiner@nanometrics.ca --- Since v1: Added irq_init declaration in misc.h to avoid compiler warning.
board/davinci/common/misc.c | 30 ++++++++++++++++++++++++++++++ board/davinci/common/misc.h | 7 +++++++ board/davinci/da830evm/da830evm.c | 28 +++++++++++----------------- 3 files changed, 48 insertions(+), 17 deletions(-)
diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c index 25ca326..412ab50 100644 --- a/board/davinci/common/misc.c +++ b/board/davinci/common/misc.c @@ -41,6 +41,22 @@ int dram_init(void) return(0); }
+void irq_init(void) +{ + /* + * Mask all IRQs by clearing the global enable and setting + * the enable clear for all the 90 interrupts. + */ + + writel(0, &davinci_aintc_regs->ger); + + writel(0, &davinci_aintc_regs->hier); + + writel(0xffffffff, &davinci_aintc_regs->ecr1); + writel(0xffffffff, &davinci_aintc_regs->ecr2); + writel(0xffffffff, &davinci_aintc_regs->ecr3); +} + #ifdef CONFIG_DRIVER_TI_EMAC
/* Read ethernet MAC address from EEPROM for DVEVM compatible boards. @@ -186,3 +202,17 @@ int davinci_configure_pin_mux_items(const struct pinmux_resource *item,
return 0; } + +/* + * Enable PSC for various peripherals. + */ +int davinci_configure_lpsc_items(const struct lpsc_resource *item, + const int n_items) +{ + int i; + + for (i = 0; i < n_items; i++) + lpsc_on(item[i].lpsc_no); + + return 0; +} diff --git a/board/davinci/common/misc.h b/board/davinci/common/misc.h index 329c369..ee35f01 100644 --- a/board/davinci/common/misc.h +++ b/board/davinci/common/misc.h @@ -45,10 +45,17 @@ struct pinmux_resource { .n_pins = ARRAY_SIZE(item) \ }
+struct lpsc_resource { + const int lpsc_no; +}; + +void irq_init(void); int dvevm_read_mac_address(uint8_t *buf); void dv_configure_mac_address(uint8_t *rom_enetaddr); int davinci_configure_pin_mux(const struct pinmux_config *pins, int n_pins); int davinci_configure_pin_mux_items(const struct pinmux_resource *item, int n_items); +int davinci_configure_lpsc_items(const struct lpsc_resource *item, + int n_items);
#endif /* __MISC_H */ diff --git a/board/davinci/da830evm/da830evm.c b/board/davinci/da830evm/da830evm.c index 6385443..66aabc8 100644 --- a/board/davinci/da830evm/da830evm.c +++ b/board/davinci/da830evm/da830evm.c @@ -120,21 +120,18 @@ static const struct pinmux_resource pinmuxes[] = { #endif };
+static const struct lpsc_resource lpsc[] = { + DAVINCI_LPSC_AEMIF, /* NAND, NOR */ + DAVINCI_LPSC_SPI0, /* Serial Flash */ + DAVINCI_LPSC_EMAC, /* image download */ + DAVINCI_LPSC_UART2, /* console */ + DAVINCI_LPSC_GPIO, +}; + int board_init(void) { #ifndef CONFIG_USE_IRQ - /* - * Mask all IRQs by clearing the global enable and setting - * the enable clear for all the 90 interrupts. - */ - - writel(0, &davinci_aintc_regs->ger); - - writel(0, &davinci_aintc_regs->hier); - - writel(0xffffffff, &davinci_aintc_regs->ecr1); - writel(0xffffffff, &davinci_aintc_regs->ecr2); - writel(0xffffffff, &davinci_aintc_regs->ecr3); + irq_init(); #endif
#ifdef CONFIG_NAND_DAVINCI @@ -165,11 +162,8 @@ int board_init(void) * assuming here that the DSP bootloader has set the IOPU * such that PSC access is available to ARM */ - lpsc_on(DAVINCI_LPSC_AEMIF); /* NAND, NOR */ - lpsc_on(DAVINCI_LPSC_SPI0); /* Serial Flash */ - lpsc_on(DAVINCI_LPSC_EMAC); /* image download */ - lpsc_on(DAVINCI_LPSC_UART2); /* console */ - lpsc_on(DAVINCI_LPSC_GPIO); + if (davinci_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc))) + return 1;
/* setup the SUSPSRC for ARM to control emulation suspend */ writel(readl(&davinci_syscfg_regs->suspsrc) &