Hi Bin,
On 20 April 2015 at 23:05, Bin Meng bmeng.cn@gmail.com wrote:
Not like other x86 chipset, there is no EEPROM for the ethernet controller on the Intel Quark SoC to retreive the mac address after power up. With pre-defined mac addresses, U-Boot boots up and will not show "Error: dwmac.90006000 address not set" message.
Signed-off-by: Bin Meng bmeng.cn@gmail.com
include/configs/galileo.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/include/configs/galileo.h b/include/configs/galileo.h index d4d0eb3..961d087 100644 --- a/include/configs/galileo.h +++ b/include/configs/galileo.h @@ -62,6 +62,8 @@ #define CONFIG_DESIGNWARE_ETH #define CONFIG_DW_ALTDESCRIPTOR #define CONFIG_PHYLIB +#define CONFIG_ETHADDR 00:02:b3:00:00:00 +#define CONFIG_ETH1ADDR 00:02:b3:00:00:01
I recall this coming up before with another board - we are not supposed to set a default MAC address since it may create inexplicable conflicts on the network if an org two boards on the same network one day. Can you just set an environment variable?
/* Environment configuration */
#define CONFIG_ENV_SECT_SIZE 0x1000
1.8.2.1
Regards, Simon