On Thu, Feb 8, 2024 at 9:27 AM Linus Walleij linus.walleij@linaro.org wrote:
On Mon, Feb 5, 2024 at 9:18 AM Ole Orhagen ole.orhagen@northern.tech wrote:
But I will try to dust it off and test it again.
Did you get any results from the tests?
Yes!
It works fine both before and after the patch. Latest log from the actual hardware:
Cmd> usb_on Enabling debug USB...
(here I copy over the binary to the internal SD-card which is presented over USB mass storage)
Cmd> reboot
Powering up system... Daughterboard fitted to site 1.
Switching on ATXPSU... ATX3V3: ON VIOset: 1.8V MBtemp: 29 degC
Configuring motherboard (rev D, var A)... IOFPGA config: PASSED MUXFPGA config: PASSED OSC CLK config: PASSED Programming image \SOFTWARE\boot-a9.bin Erasing Flash image boot.bin ... Erasing Flash ... Writing Flash ..... Updating eeprom with image boot.bin Image: boot.bin UPDATED from \SOFTWARE\boot-a9.bin
Testing SMC devices (FPGA build 8)... SRAM 32MB test: PASSED VRAM 8MB test: PASSED LAN9118 test: PASSED USB & OTG test: PASSED KMI1/KMI2 test: PASSED MMC & SD test: PASSED DVI image test: PASSED AACI AC97 test: PASSED CF card test: PASSED UART port test: PASSED MAC addrs test: PASSED
Reading Site 1 Board File \SITE1\HBI0191B\board.txt DB1 JTAG configuration complete. Setting DB1 OSCCLKS... DB1.0 DCC 0 SPI configuration complete.
Writing SCC 0x40610000 with 0xBB8A802A Writing SCC 0x40610001 with 0x00001F09 Writing SCC 0x40610002 with 0x00000000 DB1.0 DCC 0 SCC configuration complete.
DB SMB clock enabled. Waiting for SITE1 CB_READY... Testing SMB clock... Configuring MUXFPGA for DB1. Setting DVI mode for XGA. Releasing Daughterboard resets. Switching MCC log to UART1.
ARM Versatile Express Boot Monitor Version: V5.2.1 Build Date: Apr 4 2013 Daughterboard Site 1: V2P-CA9 Cortex A9 Daughterboard Site 2: Not Used Running boot script from flash - BOOTSCRIPT
U-Boot 2024.04-rc1-00101-g0101a2ffe125 (Feb 08 2024 - 09:21:31 +0100)
DRAM: 512 MiB (effective 1 GiB) WARNING: Caches not enabled Core: 22 devices, 11 uclasses, devicetree: embed Flash: 128 MiB MMC: mmci@5000: 0 Loading Environment from Flash... OK In: uart@9000 Out: uart@9000 Err: uart@9000 Net: eth0: ethernet@3,02000000 Hit any key to stop autoboot: 0 smc911x: detected LAN9118 controller smc911x: phy initialized smc911x: MAC 00:02:f7:00:3c:9d Using ethernet@3,02000000 device TFTP from server 192.168.1.140; our IP address is 192.168.1.35 Filename 'zImage'. Load address: 0x62000000 Loading: smc911x: MAC 00:02:f7:00:3c:9d
Yours, Linus Walleij
Great :)
Thanks for taking the time!