Hi Fabio,
Thank you for your help.
1. You are right. It is not an U-boot mainline configuration.
I am porting U-boot to our company's hardware platform https://www.supermicro.com/manuals/other/CSE-PTJBOD-CB3.pdf with SoC AST2400 from Aspeed embedded with an ARM core ARM926EJ 32-bit RISC CPU.
2. You are right. I have not exported the tool chain. Could you please share me a link to a readme in setting up the tool chain for Ubuntu cross build environment ?
Sincerely, Liu Wang
-----Original Message----- From: Fabio Estevam festevam@gmail.com Sent: Wednesday, January 17, 2024 6:06 AM To: Liu Wang (HW) liuw@supermicro.com Cc: u-boot@lists.denx.de Subject: Re: Could you please help me in resolving the "arch/arm/lib/vectors.S:87: Error: no such instruction: `b reset' ?"
[CAUTION: External Mail]
On Wed, Jan 17, 2024 at 9:27 AM Liu Wang liuw@supermicro.com wrote:
Sir/Madam,
Could you please help me in resolving the "arch/arm/lib/vectors.S:87: Error: no such instruction: `b reset' ?"
Sincerely, Liu Wang liuw@liuw-SYS-E100-12T-H:~/Downloads/u-boot$ make cse_ptjob_cb3_r102_defconfig
This is not a configuration supported by U-Boot mainline.
# # configuration written to .config # liuw@liuw-SYS-E100-12T-H:~/Downloads/u-boot$ make all scripts/kconfig/conf --syncconfig Kconfig CFG u-boot.cfg GEN include/autoconf.mk GEN include/autoconf.mk.dep UPD include/generated/timestamp_autogenerated.h HOSTCC tools/mkenvimage.o HOSTLD tools/mkenvimage HOSTCC tools/dumpimage.o HOSTLD tools/dumpimage HOSTCC tools/mkimage.o HOSTLD tools/mkimage LD arch/arm/cpu/built-in.o LD arch/arm/cpu//built-in.o AS arch/arm/lib/vectors.o arch/arm/lib/vectors.S: Assembler messages: arch/arm/lib/vectors.S:87: Error: no such instruction: `b reset'
Have you exported the toolchain?