Add static struct eth_ops and set ops function pointers statically. Remove setting eth_ops members dynamically.
This is a step toward converting the driver for DM.
Signed-off-by: Tomas Hlavacek tmshlvck@gmail.com --- drivers/net/enc28j60.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index 95f0b93..e73fef8 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -924,6 +924,14 @@ static void enc_halt(struct eth_device *dev) enc_release_bus(enc); }
+static struct eth_ops enc28j60_ops = { + init = enc_init, + halt = enc_halt, + send = enc_send, + recv = enc_recv, + write_hwaddr = enc_write_hwaddr +}; + /* * This is the only exported function. * @@ -962,11 +970,7 @@ int enc28j60_initialize(unsigned int bus, unsigned int cs, enc->dev = dev; /* now fill the eth_device object */ dev->priv = enc; - dev->eo->init = enc_init; - dev->eo->halt = enc_halt; - dev->eo->send = enc_send; - dev->eo->recv = enc_recv; - dev->eo->write_hwaddr = enc_write_hwaddr; + dev->eo = &enc28j60_ops; sprintf(dev->name, "enc%i.%i", bus, cs); eth_register(dev); #if defined(CONFIG_CMD_MII)