Chips attached to the RSB bus require an initialization command before they can be used. (Specifically, this command programs the chip's runtime address.) The driver does this in its .probe_chip hook, under the assumption that .probe_chip is called during child probe. This is not the case; .probe_chip is only called by dm_i2c_probe, which is intended for use by board-level code, not for chips with OF nodes.
Since this initialization command must be run before a child chip can be used, do it before probing each child.
Signed-off-by: Samuel Holland samuel@sholland.org ---
drivers/i2c/sun8i_rsb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/sun8i_rsb.c b/drivers/i2c/sun8i_rsb.c index 716b245a00..0681e398f7 100644 --- a/drivers/i2c/sun8i_rsb.c +++ b/drivers/i2c/sun8i_rsb.c @@ -252,11 +252,12 @@ static int sun8i_rsb_probe(struct udevice *bus) static int sun8i_rsb_child_pre_probe(struct udevice *child) { struct dm_i2c_chip *chip = dev_get_parent_plat(child); + struct udevice *bus = child->parent;
/* Ensure each transfer is for a single register. */ chip->flags |= DM_I2C_CHIP_RD_ADDRESS | DM_I2C_CHIP_WR_ADDRESS;
- return 0; + return sun8i_rsb_probe_chip(bus, chip->chip_addr, 0); }
static const struct dm_i2c_ops sun8i_rsb_ops = {