Re: [U-Boot] [PATCH 2/2] MPC8308ERDB: minimal support for devboard from Freescale

Hi Kim,

On 24.06.2010 22:00, Kim Phillips wrote:

...

I've enabled icache and now the board sometimes resets twice after U-Boot 'reset' command:

...

(It doesn't always stop at "DRAM:" line but that position is most frequent) Maybe you have some ideas on this subject?

hmm, if it's only on soft-resets, can you try adding HID0_ENABLE_INSTRUCTION_CACHE to CONFIG_SYS_HID0_INIT in addition to _FINAL? Some cache state is preserved over a soft-reset...

Thanks for your advice but this doesn't help...

Regards, Ilya.