From: Chris Packham chris.packham@alliedtelesis.co.nz
Instead of assuming that SYS_TEXT_BASE is 0xFFF80000 calculate the initial pbl command offset by subtracting the image size from the top of the 24-bit address range. Also increase the size of the memory buffer to accommodate a larger output image.
Signed-off-by: Chris Packham chris.packham@alliedtelesis.co.nz --- Hi,
I was trying to get a SPIFLASH image working for my board based on a P2040 and found that the pblimage tool assumes that u-boot.bin is always 512K. In my case it's actually larger. This patch is my attempt to allow for an arbitrary u-boot.bin image size.
Thanks, Chris
tools/pblimage.c | 33 ++++++++++++++++++++++++++------- 1 file changed, 26 insertions(+), 7 deletions(-)
diff --git a/tools/pblimage.c b/tools/pblimage.c index 508a747..3582ada 100644 --- a/tools/pblimage.c +++ b/tools/pblimage.c @@ -26,18 +26,14 @@ #include "pblimage.h"
/* - * The PBL can load up to 64 bytes at a time, so we split the U-Boot - * image into 64 byte chunks. PBL needs a command for each piece, of - * the form "81xxxxxx", where "xxxxxx" is the offset. SYS_TEXT_BASE - * is 0xFFF80000 for PBL boot, and PBL only cares about low 24-bit, - * so it starts from 0x81F80000. + * Initialize to an invalid value. */ -static uint32_t next_pbl_cmd = 0x81F80000; +static uint32_t next_pbl_cmd = 0x82000000; /* * need to store all bytes in memory for calculating crc32, then write the * bytes to image file for PBL boot. */ -static unsigned char mem_buf[600000]; +static unsigned char mem_buf[1000000]; static unsigned char *pmem_buf = mem_buf; static int pbl_size; static char *fname = "Unknown"; @@ -52,6 +48,28 @@ static union
#define ENDIANNESS ((char)endian_test.l)
+/* + * The PBL can load up to 64 bytes at a time, so we split the U-Boot + * image into 64 byte chunks. PBL needs a command for each piece, of + * the form "81xxxxxx", where "xxxxxx" is the offset. Calculate the + * start offset by subtracting the size of the u-boot image from the + * top of the allowable 24-bit range. + */ +static void init_next_pbl_cmd(FILE *fp_uboot) +{ + struct stat st; + int fd = fileno(fp_uboot); + size_t size; + + if (fstat(fd, &st) == -1) { + printf("Error: Could not determine u-boot image size. %s\n", + strerror(errno)); + exit(EXIT_FAILURE); + } + + next_pbl_cmd = 0x82000000 - st.st_size; +} + static void generate_pbl_cmd(void) { uint32_t val = next_pbl_cmd; @@ -80,6 +98,7 @@ static void pbl_fget(size_t size, FILE *stream) /* load split u-boot with PBI command 81xxxxxx. */ static void load_uboot(FILE *fp_uboot) { + init_next_pbl_cmd(fp_uboot); while (next_pbl_cmd < 0x82000000) { generate_pbl_cmd(); pbl_fget(64, fp_uboot);