Dear "GurumurthyGowdar",
In message 20090806185644.1388.qmail@f4mail-234-237.rediffmail.com you wrote:
i have an issue with the clock configuration for MPC8280 for U-boot 1.3.1,
...
in terms of hardware i have configured as per the clock configuration but if we see the above message i have a doubt regarding the 60x Bus Freq 16-50 --> but i have set 100 MHZ, Core Freq 50-150 , i have set for 300 MHZ by checking the MPC8280EC i have configured the clock settings.
Has this not been discusses in length before?
please let me know whether i am doing anything wrong or it is correct. but why it is printing wrong in u-boot message.
You do not provide any new factrs about your hardware and/or your configurations, so why do you expect any additional help from us?
if anyone ported U-boot 1.3.1 on MPC8280 send me the u-boot messages when booted or power on.
It makes zero sense to re-post the very same question again and again. Nobody can help you based on the little information you give. All we can say is that you have some hardware and/or software miscon- figuration.
Best regards,
Wolfgang Denk