In order to maintain compatibility with the Linux DTS, the entire fsl-mc node is added but instead of being probed by a dedicated bus driver it will be a simple-mfd.
Also, annotate the external MDIO nodes and describe the PHYs (4 x AQR405 and 4 x CS4340). Also, add phy-handles for the dpmacs to their associated PHY.
Signed-off-by: Ioana Ciornei ioana.ciornei@nxp.com --- Changes in v2: - none
arch/arm/dts/fsl-ls2080a.dtsi | 75 +++++++++++++++++++++-- arch/arm/dts/fsl-ls2088a-rdb-qspi.dts | 88 +++++++++++++++++++++++++++ 2 files changed, 157 insertions(+), 6 deletions(-)
diff --git a/arch/arm/dts/fsl-ls2080a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi index 7ff854caecd5..fb5777e268e4 100644 --- a/arch/arm/dts/fsl-ls2080a.dtsi +++ b/arch/arm/dts/fsl-ls2080a.dtsi @@ -50,12 +50,6 @@ interrupts = <0 32 0x1>; /* edge triggered */ };
- fsl_mc: fsl-mc@80c000000 { - compatible = "fsl,qoriq-mc"; - reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ - <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ - }; - i2c0: i2c@2000000 { status = "disabled"; compatible = "fsl,vf610-i2c"; @@ -200,6 +194,75 @@ status = "disabled"; };
+ fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc", "simple-mfd"; + reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ + <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + #address-cells = <3>; + #size-cells = <1>; + + /* + * Region type 0x0 - MC portals + * Region type 0x1 - QBMAN portals + */ + ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 + 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; + + dpmacs { + compatible = "simple-mfd"; + #address-cells = <1>; + #size-cells = <0>; + + dpmac1: dpmac@1 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x1>; + status = "disabled"; + }; + + dpmac2: dpmac@2 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x2>; + status = "disabled"; + }; + + dpmac3: dpmac@3 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x3>; + status = "disabled"; + }; + + dpmac4: dpmac@4 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x4>; + status = "disabled"; + }; + + dpmac5: dpmac@5 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x5>; + status = "disabled"; + }; + + dpmac6: dpmac@6 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x6>; + status = "disabled"; + }; + + dpmac7: dpmac@7 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x7>; + status = "disabled"; + }; + + dpmac8: dpmac@8 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x8>; + status = "disabled"; + }; + }; + }; + emdio1: mdio@8B96000 { compatible = "fsl,ls-mdio"; reg = <0x0 0x8B96000 0x0 0x1000>; diff --git a/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts b/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts index 72b2177b70d9..16b9aeec966c 100644 --- a/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts +++ b/arch/arm/dts/fsl-ls2088a-rdb-qspi.dts @@ -21,6 +21,94 @@ }; };
+&dpmac1 { + status = "okay"; + phy-handle = <&mdio1_phy1>; + phy-connection-type = "xfi"; +}; + +&dpmac2 { + status = "okay"; + phy-handle = <&mdio1_phy2>; + phy-connection-type = "xfi"; +}; + +&dpmac3 { + status = "okay"; + phy-handle = <&mdio1_phy3>; + phy-connection-type = "xfi"; +}; + +&dpmac4 { + status = "okay"; + phy-handle = <&mdio1_phy4>; + phy-connection-type = "xfi"; +}; + +&dpmac5 { + status = "okay"; + phy-handle = <&mdio2_phy1>; + phy-connection-type = "xfi"; +}; + +&dpmac6 { + status = "okay"; + phy-handle = <&mdio2_phy2>; + phy-connection-type = "xfi"; +}; + +&dpmac7 { + status = "okay"; + phy-handle = <&mdio2_phy3>; + phy-connection-type = "xfi"; +}; + +&dpmac8 { + status = "okay"; + phy-handle = <&mdio2_phy4>; + phy-connection-type = "xfi"; +}; + +&emdio1 { + status = "okay"; + + /* CS4340 PHYs */ + mdio1_phy1: emdio1_phy@1 { + reg = <0x10>; + }; + mdio1_phy2: emdio1_phy@2 { + reg = <0x11>; + }; + mdio1_phy3: emdio1_phy@3 { + reg = <0x12>; + }; + mdio1_phy4: emdio1_phy@4 { + reg = <0x13>; + }; +}; + +&emdio2 { + status = "okay"; + + /* AQR405 PHYs */ + mdio2_phy1: emdio2_phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + mdio2_phy2: emdio2_phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + mdio2_phy3: emdio2_phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + mdio2_phy4: emdio2_phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x3>; + }; +}; + &dspi { bus-num = <0>; status = "okay";