omap1510inn is orphan and has been for years now. Reove it and, as it was the only arm925t target, also remove arm925t support. Update doc/README.scrapyard accordingly.
Signed-off-by: Albert ARIBAUD albert.u.boot@aribaud.net --- Changes for v3: - update doc/README.scrapyard Changes for v2: - rebased after boards.cfg/MAINTAINERS reformating Changes for v1: - initial submission
MAKEALL | 1 - README | 1 - arch/arm/cpu/arm925t/Makefile | 34 --- arch/arm/cpu/arm925t/config.mk | 17 -- arch/arm/cpu/arm925t/cpu.c | 50 ---- arch/arm/cpu/arm925t/omap925.c | 23 -- arch/arm/cpu/arm925t/start.S | 382 ------------------------------- arch/arm/cpu/arm925t/timer.c | 104 --------- board/ti/omap1510inn/Makefile | 29 --- board/ti/omap1510inn/config.mk | 25 -- board/ti/omap1510inn/lowlevel_init.S | 380 ------------------------------ board/ti/omap1510inn/omap1510innovator.c | 125 ---------- boards.cfg | 1 - doc/README.scrapyard | 3 +- include/arm925t.h | 11 - include/configs/omap1510inn.h | 166 -------------- 16 files changed, 2 insertions(+), 1350 deletions(-) delete mode 100644 arch/arm/cpu/arm925t/Makefile delete mode 100644 arch/arm/cpu/arm925t/config.mk delete mode 100644 arch/arm/cpu/arm925t/cpu.c delete mode 100644 arch/arm/cpu/arm925t/omap925.c delete mode 100644 arch/arm/cpu/arm925t/start.S delete mode 100644 arch/arm/cpu/arm925t/timer.c delete mode 100644 board/ti/omap1510inn/Makefile delete mode 100644 board/ti/omap1510inn/config.mk delete mode 100644 board/ti/omap1510inn/lowlevel_init.S delete mode 100644 board/ti/omap1510inn/omap1510innovator.c delete mode 100644 include/arm925t.h delete mode 100644 include/configs/omap1510inn.h
diff --git a/MAKEALL b/MAKEALL index c0d04fb..956f3da 100755 --- a/MAKEALL +++ b/MAKEALL @@ -353,7 +353,6 @@ LIST_ARM7="$(boards_by_cpu arm720t)"
LIST_ARM9="$(boards_by_cpu arm920t) \ $(boards_by_cpu arm926ejs) \ - $(boards_by_cpu arm925t) \ $(boards_by_cpu arm946es) \ "
diff --git a/README b/README index ccd47fa..0c3da92 100644 --- a/README +++ b/README @@ -139,7 +139,6 @@ Directory Hierarchy: /at91 Files specific to Atmel AT91RM9200 CPU /imx Files specific to Freescale MC9328 i.MX CPUs /s3c24x0 Files specific to Samsung S3C24X0 CPUs - /arm925t Files specific to ARM 925 CPUs /arm926ejs Files specific to ARM 926 CPUs /arm1136 Files specific to ARM 1136 CPUs /ixp Files specific to Intel XScale IXP CPUs diff --git a/arch/arm/cpu/arm925t/Makefile b/arch/arm/cpu/arm925t/Makefile deleted file mode 100644 index 40d2156..0000000 --- a/arch/arm/cpu/arm925t/Makefile +++ /dev/null @@ -1,34 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(CPU).o - -START = start.o - -COBJS += cpu.o -COBJS += omap925.o -COBJS += timer.o - -SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -START := $(addprefix $(obj),$(START)) - -all: $(obj).depend $(START) $(LIB) - -$(LIB): $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/arch/arm/cpu/arm925t/config.mk b/arch/arm/cpu/arm925t/config.mk deleted file mode 100644 index 58fd756..0000000 --- a/arch/arm/cpu/arm925t/config.mk +++ /dev/null @@ -1,17 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, garyj@denx.de -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float - -PLATFORM_CPPFLAGS += -march=armv4 -# ========================================================================= -# -# Supply options according to compiler version -# -# ========================================================================= -PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) diff --git a/arch/arm/cpu/arm925t/cpu.c b/arch/arm/cpu/arm925t/cpu.c deleted file mode 100644 index d0f8e1e..0000000 --- a/arch/arm/cpu/arm925t/cpu.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger mgroeger@sysgo.de - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, garyj@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * CPU specific code - */ - -#include <common.h> -#include <command.h> -#include <arm925t.h> -#include <asm/system.h> - -static void cache_flush(void); - -int cleanup_before_linux (void) -{ - /* - * this function is called just before we call linux - * it prepares the processor for linux - * - * we turn off caches etc ... - */ - - disable_interrupts (); - - - /* turn off I/D-cache */ - icache_disable(); - dcache_disable(); - /* flush I/D-cache */ - cache_flush(); - - return 0; -} - -/* flush I/D-cache */ -static void cache_flush (void) -{ - unsigned long i = 0; - - asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i)); -} diff --git a/arch/arm/cpu/arm925t/omap925.c b/arch/arm/cpu/arm925t/omap925.c deleted file mode 100644 index c0402d1..0000000 --- a/arch/arm/cpu/arm925t/omap925.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * (C) Copyright 2003 - * Texas Instruments <www.ti.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <arm925t.h> - -#define MIF_CONFIG_REG 0xFFFECC0C -#define FLASH_GLOBAL_CTRL_NWP 1 - -void archflashwp (void *archdata, int wp) -{ - ulong *fgc = (ulong *) MIF_CONFIG_REG; - - if (wp == 1) - *fgc &= ~FLASH_GLOBAL_CTRL_NWP; - else - *fgc |= FLASH_GLOBAL_CTRL_NWP; -} diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S deleted file mode 100644 index 1e765b7..0000000 --- a/arch/arm/cpu/arm925t/start.S +++ /dev/null @@ -1,382 +0,0 @@ -/* - * armboot - Startup Code for ARM925 CPU-core - * - * Copyright (c) 2003 Texas Instruments - * - * ----- Adapted for OMAP1510 from ARM920 code ------ - * - * Copyright (c) 2001 Marius Gröger mag@sysgo.de - * Copyright (c) 2002 Alex Züpke azu@sysgo.de - * Copyright (c) 2002 Gary Jennejohn garyj@denx.de - * Copyright (c) 2003 Richard Woodruff r-woodruff2@ti.com - * Copyright (c) 2003 Kshitij kshitij@ti.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm-offsets.h> -#include <config.h> -#include <version.h> - -/* - ************************************************************************* - * - * Jump vector table as in table 3.1 in [1] - * - ************************************************************************* - */ - - -.globl _start -_start: b reset - ldr pc, _undefined_instruction - ldr pc, _software_interrupt - ldr pc, _prefetch_abort - ldr pc, _data_abort - ldr pc, _not_used - ldr pc, _irq - ldr pc, _fiq - -_undefined_instruction: .word undefined_instruction -_software_interrupt: .word software_interrupt -_prefetch_abort: .word prefetch_abort -_data_abort: .word data_abort -_not_used: .word not_used -_irq: .word irq -_fiq: .word fiq - - .balignl 16,0xdeadbeef - - -/* - ************************************************************************* - * - * Startup Code (reset vector) - * - * do important init only if we don't start from memory! - * setup Memory and board specific bits prior to relocation. - * relocate armboot to ram - * setup stack - * - ************************************************************************* - */ - -.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - -#ifdef CONFIG_USE_IRQ -/* IRQ stack memory (calculated at run-time) */ -.globl IRQ_STACK_START -IRQ_STACK_START: - .word 0x0badc0de - -/* IRQ stack memory (calculated at run-time) */ -.globl FIQ_STACK_START -FIQ_STACK_START: - .word 0x0badc0de -#endif - -/* IRQ stack memory (calculated at run-time) + 8 bytes */ -.globl IRQ_STACK_START_IN -IRQ_STACK_START_IN: - .word 0x0badc0de - -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - - /* - * Set up 925T mode - */ - mov r1, #0x81 /* Set ARM925T configuration. */ - mcr p15, 0, r1, c15, c1, 0 /* Write ARM925T configuration register. */ - - /* - * turn off the watchdog, unlock/diable sequence - */ - mov r1, #0xF5 - ldr r0, =WDTIM_MODE - strh r1, [r0] - mov r1, #0xA0 - strh r1, [r0] - - /* - * mask all IRQs by setting all bits in the INTMR - default - */ - mov r1, #0xffffffff - ldr r0, =REG_IHL1_MIR - str r1, [r0] - ldr r0, =REG_IHL2_MIR - str r1, [r0] - - /* - * wait for dpll to lock - */ - ldr r0, =CK_DPLL1 - mov r1, #0x10 - strh r1, [r0] -poll1: - ldrh r1, [r0] - ands r1, r1, #0x01 - beq poll1 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - - bl _main - -/*------------------------------------------------------------------------------*/ - - .globl c_runtime_cpu_setup -c_runtime_cpu_setup: - - mov pc, lr - -/* - ************************************************************************* - * - * CPU_init_critical registers - * - * setup important registers - * setup memory timing - * - ************************************************************************* - */ - - -cpu_init_crit: - /* - * flush v4 I/D caches - */ - mov r0, #0 - mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ - mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ - - /* - * disable MMU stuff and caches - */ - mrc p15, 0, r0, c1, c0, 0 - bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) - bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) - orr r0, r0, #0x00000002 @ set bit 2 (A) Align - orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache - mcr p15, 0, r0, c1, c0, 0 - - /* - * Go setup Memory and board specific bits prior to relocation. - */ - mov ip, lr /* perserve link reg across call */ - bl lowlevel_init /* go setup pll,mux,memory */ - mov lr, ip /* restore link */ - mov pc, lr /* back to my caller */ -/* - ************************************************************************* - * - * Interrupt handling - * - ************************************************************************* - */ - -@ -@ IRQ stack frame. -@ -#define S_FRAME_SIZE 72 - -#define S_OLD_R0 68 -#define S_PSR 64 -#define S_PC 60 -#define S_LR 56 -#define S_SP 52 - -#define S_IP 48 -#define S_FP 44 -#define S_R10 40 -#define S_R9 36 -#define S_R8 32 -#define S_R7 28 -#define S_R6 24 -#define S_R5 20 -#define S_R4 16 -#define S_R3 12 -#define S_R2 8 -#define S_R1 4 -#define S_R0 0 - -#define MODE_SVC 0x13 -#define I_BIT 0x80 - -/* - * use bad_save_user_regs for abort/prefetch/undef/swi ... - * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling - */ - - .macro bad_save_user_regs - sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack - stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 - - ldr r2, IRQ_STACK_START_IN - ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs) - add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack - - add r5, sp, #S_SP - mov r1, lr - stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr - mov r0, sp @ save current stack into r0 (param register) - .endm - - .macro irq_save_user_regs - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ Calling r0-r12 - add r8, sp, #S_PC @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good. - stmdb r8, {sp, lr}^ @ Calling SP, LR - str lr, [r8, #0] @ Save calling PC - mrs r6, spsr - str r6, [r8, #4] @ Save CPSR - str r0, [r8, #8] @ Save OLD_R0 - mov r0, sp - .endm - - .macro irq_restore_user_regs - ldmia sp, {r0 - lr}^ @ Calling r0 - lr - mov r0, r0 - ldr lr, [sp, #S_PC] @ Get PC - add sp, sp, #S_FRAME_SIZE - subs pc, lr, #4 @ return & move spsr_svc into cpsr - .endm - - .macro get_bad_stack - ldr r13, IRQ_STACK_START_IN - - str lr, [r13] @ save caller lr in position 0 of saved stack - mrs lr, spsr @ get the spsr - str lr, [r13, #4] @ save spsr in position 1 of saved stack - - mov r13, #MODE_SVC @ prepare SVC-Mode - @ msr spsr_c, r13 - msr spsr, r13 @ switch modes, make sure moves will execute - mov lr, pc @ capture return pc - movs pc, lr @ jump to next instruction & switch modes. - .endm - - .macro get_irq_stack @ setup IRQ stack - ldr sp, IRQ_STACK_START - .endm - - .macro get_fiq_stack @ setup FIQ stack - ldr sp, FIQ_STACK_START - .endm - -/* - * exception handlers - */ - .align 5 -undefined_instruction: - get_bad_stack - bad_save_user_regs - bl do_undefined_instruction - - .align 5 -software_interrupt: - get_bad_stack - bad_save_user_regs - bl do_software_interrupt - - .align 5 -prefetch_abort: - get_bad_stack - bad_save_user_regs - bl do_prefetch_abort - - .align 5 -data_abort: - get_bad_stack - bad_save_user_regs - bl do_data_abort - - .align 5 -not_used: - get_bad_stack - bad_save_user_regs - bl do_not_used - -#ifdef CONFIG_USE_IRQ - - .align 5 -irq: - get_irq_stack - irq_save_user_regs - bl do_irq - irq_restore_user_regs - - .align 5 -fiq: - get_fiq_stack - /* someone ought to write a more effiction fiq_save_user_regs */ - irq_save_user_regs - bl do_fiq - irq_restore_user_regs - -#else - - .align 5 -irq: - get_bad_stack - bad_save_user_regs - bl do_irq - - .align 5 -fiq: - get_bad_stack - bad_save_user_regs - bl do_fiq - -#endif - - .align 5 -.globl reset_cpu -reset_cpu: - ldr r1, rstctl1 /* get clkm1 reset ctl */ - mov r3, #0x3 /* dsp_en + arm_rst = global reset */ - strh r3, [r1] /* force reset */ - mov r0, r0 -_loop_forever: - b _loop_forever -rstctl1: - .word 0xfffece10 diff --git a/arch/arm/cpu/arm925t/timer.c b/arch/arm/cpu/arm925t/timer.c deleted file mode 100644 index e56b576..0000000 --- a/arch/arm/cpu/arm925t/timer.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * (C) Copyright 2009 - * 2N Telekomunikace, <www.2n.cz> - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger mgroeger@sysgo.de - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke azu@sysgo.de - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, garyj@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <arm925t.h> -#include <configs/omap1510.h> -#include <asm/io.h> - -#define TIMER_LOAD_VAL 0xffffffff -#define TIMER_CLOCK (CONFIG_SYS_CLK_FREQ / (2 << CONFIG_SYS_PTV)) - -static uint32_t timestamp; -static uint32_t lastdec; - -/* nothing really to do with interrupts, just starts up a counter. */ -int timer_init (void) -{ - /* Start the decrementer ticking down from 0xffffffff */ - __raw_writel(TIMER_LOAD_VAL, CONFIG_SYS_TIMERBASE + LOAD_TIM); - __raw_writel(MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE | - (CONFIG_SYS_PTV << MPUTIM_PTV_BIT), - CONFIG_SYS_TIMERBASE + CNTL_TIMER); - - /* init the timestamp and lastdec value */ - lastdec = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM) / - (TIMER_CLOCK / CONFIG_SYS_HZ); - timestamp = 0; /* start "advancing" time stamp from 0 */ - - return 0; -} - -/* - * timer without interrupts - */ -ulong get_timer (ulong base) -{ - return get_timer_masked () - base; -} - -/* delay x useconds AND preserve advance timestamp value */ -void __udelay (unsigned long usec) -{ - int32_t tmo = usec * (TIMER_CLOCK / 1000) / 1000; - uint32_t now, last = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM); - - while (tmo > 0) { - now = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM); - if (last < now) /* count down timer underflow */ - tmo -= TIMER_LOAD_VAL - now + last; - else - tmo -= last - now; - last = now; - } -} - -ulong get_timer_masked (void) -{ - uint32_t now = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM) / - (TIMER_CLOCK / CONFIG_SYS_HZ); - if (lastdec < now) /* count down timer underflow */ - timestamp += TIMER_LOAD_VAL / (TIMER_CLOCK / CONFIG_SYS_HZ) - - now + lastdec; - else - timestamp += lastdec - now; - lastdec = now; - - return timestamp; -} - -/* - * This function is derived from PowerPC code (read timebase as long long). - * On ARM it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - return get_timer(0); -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk (void) -{ - return CONFIG_SYS_HZ; -} diff --git a/board/ti/omap1510inn/Makefile b/board/ti/omap1510inn/Makefile deleted file mode 100644 index ad5a7eb..0000000 --- a/board/ti/omap1510inn/Makefile +++ /dev/null @@ -1,29 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := omap1510innovator.o -SOBJS := lowlevel_init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/ti/omap1510inn/config.mk b/board/ti/omap1510inn/config.mk deleted file mode 100644 index 67fe0bd..0000000 --- a/board/ti/omap1510inn/config.mk +++ /dev/null @@ -1,25 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, garyj@denx.de -# David Mueller, ELSOFT AG, d.mueller@elsoft.ch -# -# (C) Copyright 2003 -# Texas Instruments, <www.ti.com> -# Kshitij Gupta Kshitij@ti.com -# -# TI Innovator board with OMAP1510 (ARM925T) cpu -# see http://www.ti.com/ for more information on Texas Insturments -# -# Innovator has 1 bank of 256 MB SDRAM -# Physical Address: -# 1000'0000 to 2000'0000 -# -# -# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000 (mem base + reserved) -# -# we load ourself to 1108'0000 -# -# - - -CONFIG_SYS_TEXT_BASE = 0x11080000 diff --git a/board/ti/omap1510inn/lowlevel_init.S b/board/ti/omap1510inn/lowlevel_init.S deleted file mode 100644 index 4d3ec39..0000000 --- a/board/ti/omap1510inn/lowlevel_init.S +++ /dev/null @@ -1,380 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * - * -- Some bits of code used from rrload's head_OMAP1510.s -- - * Copyright (C) 2002 RidgeRun, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <version.h> - -#if defined(CONFIG_OMAP1510) -#include <./configs/omap1510.h> -#endif - -#define OMAP1510_CLKS ((1<<EN_XORPCK)|(1<<EN_PERCK)|(1<<EN_TIMCK)|(1<<EN_GPIOCK)) - - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */ - -.globl lowlevel_init -lowlevel_init: - - /* - * Configure 1510 pins functions to match our board. - */ - ldr r0, REG_PULL_DWN_CTRL_0 - ldr r1, VAL_PULL_DWN_CTRL_0 - str r1, [r0] - ldr r0, REG_PULL_DWN_CTRL_1 - ldr r1, VAL_PULL_DWN_CTRL_1 - str r1, [r0] - ldr r0, REG_PULL_DWN_CTRL_2 - ldr r1, VAL_PULL_DWN_CTRL_2 - str r1, [r0] - ldr r0, REG_PULL_DWN_CTRL_3 - ldr r1, VAL_PULL_DWN_CTRL_3 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_4 - ldr r1, VAL_FUNC_MUX_CTRL_4 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_5 - ldr r1, VAL_FUNC_MUX_CTRL_5 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_6 - ldr r1, VAL_FUNC_MUX_CTRL_6 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_7 - ldr r1, VAL_FUNC_MUX_CTRL_7 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_8 - ldr r1, VAL_FUNC_MUX_CTRL_8 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_9 - ldr r1, VAL_FUNC_MUX_CTRL_9 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_A - ldr r1, VAL_FUNC_MUX_CTRL_A - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_B - ldr r1, VAL_FUNC_MUX_CTRL_B - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_C - ldr r1, VAL_FUNC_MUX_CTRL_C - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_D - ldr r1, VAL_FUNC_MUX_CTRL_D - str r1, [r0] - ldr r0, REG_VOLTAGE_CTRL_0 - ldr r1, VAL_VOLTAGE_CTRL_0 - str r1, [r0] - ldr r0, REG_TEST_DBG_CTRL_0 - ldr r1, VAL_TEST_DBG_CTRL_0 - str r1, [r0] - ldr r0, REG_MOD_CONF_CTRL_0 - ldr r1, VAL_MOD_CONF_CTRL_0 - str r1, [r0] - - /* Move to 1510 mode */ - ldr r0, REG_COMP_MODE_CTRL_0 - ldr r1, VAL_COMP_MODE_CTRL_0 - str r1, [r0] - - /* Set up Traffic Ctlr*/ - ldr r0, REG_TC_IMIF_PRIO - mov r1, #0x0 - str r1, [r0] - ldr r0, REG_TC_EMIFS_PRIO - str r1, [r0] - ldr r0, REG_TC_EMIFF_PRIO - str r1, [r0] - - ldr r0, REG_TC_EMIFS_CONFIG - ldr r1, [r0] - bic r1, r1, #0x08 /* clear the global power-down enable PDE bit */ - bic r1, r1, #0x01 /* write protect flash by clearing the WP bit */ - str r1, [r0] /* EMIFS GlB Configuration. (value 0x12 most likely) */ - - /* Setup some clock domains */ - ldr r1, =OMAP1510_CLKS - ldr r0, REG_ARM_IDLECT2 - strh r1, [r0] /* CLKM, Clock domain control. */ - - mov r1, #0x01 /* PER_EN bit */ - ldr r0, REG_ARM_RSTCT2 - strh r1, [r0] /* CLKM; Peripheral reset. */ - - /* Set CLKM to Sync-Scalable */ - /* I supposidly need to enable the dsp clock before switching */ - mov r1, #0x1000 - ldr r0, REG_ARM_SYSST - strh r1, [r0] - mov r0, #0x400 -1: - subs r0, r0, #0x1 /* wait for any bubbles to finish */ - bne 1b - - ldr r1, VAL_ARM_CKCTL /* use 12Mhz ref, PER must be <= 50Mhz so /2 */ - ldr r0, REG_ARM_CKCTL - strh r1, [r0] - - /* setup DPLL 1 */ - ldr r1, VAL_DPLL1_CTL - ldr r0, REG_DPLL1_CTL - strh r1, [r0] - ands r1, r1, #0x10 /* Check if PLL is enabled. */ - beq lock_end /* Do not look for lock if BYPASS selected */ -2: - ldrh r1, [r0] - ands r1, r1, #0x01 /* Check the LOCK bit. */ - beq 2b /* ...loop until bit goes hi. */ -lock_end: - - /* Set memory timings corresponding to the new clock speed */ - - /* Check execution location to determine current execution location - * and branch to appropriate initialization code. - */ - mov r0, #0x10000000 /* Load physical SDRAM base. */ - mov r1, pc /* Get current execution location. */ - /* Zero all but top 6 bits of PC, as they alone detect whether an - * address is in the range 0x1000:0000-0x13ff:ffff, the 64M sized - * valid range for SDRAM on the OMAP 1510/5910. - */ - and r1, r1, #0xfc000000 - cmp r1, r0 /* Compare. */ - beq skip_sdram /* Skip over EMIF-fast initialization - * if running from SDRAM. - */ - - /* - * Delay for SDRAM initialization. - */ - mov r3, #0x1800 /* value should be checked */ -3: - subs r3, r3, #0x1 /* Decrement count */ - bne 3b - - /* - * Set SDRAM control values. Disable refresh before MRS command. - */ - ldr r0, VAL_TC_EMIFF_SDRAM_CONFIG /* get good value */ - bic r3, r0, #0xC /* (BIT3|BIT2) ulConfig with auto-refresh disabled. */ - orr r3, r3, #0x8000000 /* (BIT27) Disable CLK when Power down or Self-Refresh */ - orr r3, r3, #0x4000000 /* BIT26 Power Down Enable */ - ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */ - str r3, [r2] /* Store the passed value with AR disabled. */ - - ldr r1, VAL_TC_EMIFF_MRS /* get MRS value */ - ldr r2, REG_TC_EMIFF_MRS /* Point to MRS register. */ - str r1, [r2] /* Store the passed value.*/ - - ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */ - str r0, [r2] /* Store the passed value. */ - - /* - * Delay for SDRAM initialization. - */ - mov r3, #0x1800 -4: - subs r3, r3, #1 /* Decrement count. */ - bne 4b - -skip_sdram: - - /* slow interface */ - ldr r1, VAL_TC_EMIFS_CS0_CONFIG - ldr r0, REG_TC_EMIFS_CS0_CONFIG - str r1, [r0] /* Chip Select 0 */ - ldr r1, VAL_TC_EMIFS_CS1_CONFIG - ldr r0, REG_TC_EMIFS_CS1_CONFIG - str r1, [r0] /* Chip Select 1 */ - ldr r1, VAL_TC_EMIFS_CS2_CONFIG - ldr r0, REG_TC_EMIFS_CS2_CONFIG - str r1, [r0] /* Chip Select 2 */ - ldr r1, VAL_TC_EMIFS_CS3_CONFIG - ldr r0, REG_TC_EMIFS_CS3_CONFIG - str r1, [r0] /* Chip Select 3 */ - - /* Next, Enable the RS232 Line Drivers in the FPGA. */ - /* Also, power on the audio CODEC's amplifier here, */ - /* which will make a noise on the audio output. */ - /* This is done here instead of in the kernel so there */ - /* isn't a loud popping noise at the start of each */ - /* song. */ - /* Also, disable the CODEC's clocks. */ - /* omap1510-HelenP1 [specific] */ - - ldr r0, REG_FPGA_POWER - mov r1, #0 - ldr r2, REG_FPGA_DIP_SWITCH - ldrb r3, [r2] - cmp r3, #0x8 - movne r1, #0x62 /* Enable the RS232 Line Drivers in the EPLD */ - strb r1, [r0] - ldr r0, REG_FPGA_AUDIO - mov r1, #0x0 /* Disable sound driver (CODEC clocks) */ - strb r1, [r0] - - /* back to arch calling code */ - mov pc, lr - -/* the literal pools origin */ - .ltorg - -/* OMAP configuration registers */ -REG_FUNC_MUX_CTRL_0: /* 32 bits */ - .word 0xfffe1000 -REG_FUNC_MUX_CTRL_1: /* 32 bits */ - .word 0xfffe1004 -REG_FUNC_MUX_CTRL_2: /* 32 bits */ - .word 0xfffe1008 -REG_COMP_MODE_CTRL_0: /* 32 bits */ - .word 0xfffe100c -REG_FUNC_MUX_CTRL_3: /* 32 bits */ - .word 0xfffe1010 -REG_FUNC_MUX_CTRL_4: /* 32 bits */ - .word 0xfffe1014 -REG_FUNC_MUX_CTRL_5: /* 32 bits */ - .word 0xfffe1018 -REG_FUNC_MUX_CTRL_6: /* 32 bits */ - .word 0xfffe101c -REG_FUNC_MUX_CTRL_7: /* 32 bits */ - .word 0xfffe1020 -REG_FUNC_MUX_CTRL_8: /* 32 bits */ - .word 0xfffe1024 -REG_FUNC_MUX_CTRL_9: /* 32 bits */ - .word 0xfffe1028 -REG_FUNC_MUX_CTRL_A: /* 32 bits */ - .word 0xfffe102C -REG_FUNC_MUX_CTRL_B: /* 32 bits */ - .word 0xfffe1030 -REG_FUNC_MUX_CTRL_C: /* 32 bits */ - .word 0xfffe1034 -REG_FUNC_MUX_CTRL_D: /* 32 bits */ - .word 0xfffe1038 -REG_PULL_DWN_CTRL_0: /* 32 bits */ - .word 0xfffe1040 -REG_PULL_DWN_CTRL_1: /* 32 bits */ - .word 0xfffe1044 -REG_PULL_DWN_CTRL_2: /* 32 bits */ - .word 0xfffe1048 -REG_PULL_DWN_CTRL_3: /* 32 bits */ - .word 0xfffe104c -REG_VOLTAGE_CTRL_0: /* 32 bits */ - .word 0xfffe1060 -REG_TEST_DBG_CTRL_0: /* 32 bits */ - .word 0xfffe1070 -REG_MOD_CONF_CTRL_0: /* 32 bits */ - .word 0xfffe1080 -REG_TC_IMIF_PRIO: /* 32 bits */ - .word 0xfffecc00 -REG_TC_EMIFS_PRIO: /* 32 bits */ - .word 0xfffecc04 -REG_TC_EMIFF_PRIO: /* 32 bits */ - .word 0xfffecc08 -REG_TC_EMIFS_CONFIG: /* 32 bits */ - .word 0xfffecc0c -REG_TC_EMIFS_CS0_CONFIG: /* 32 bits */ - .word 0xfffecc10 -REG_TC_EMIFS_CS1_CONFIG: /* 32 bits */ - .word 0xfffecc14 -REG_TC_EMIFS_CS2_CONFIG: /* 32 bits */ - .word 0xfffecc18 -REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */ - .word 0xfffecc1c -REG_TC_EMIFF_SDRAM_CONFIG: /* 32 bits */ - .word 0xfffecc20 -REG_TC_EMIFF_MRS: /* 32 bits */ - .word 0xfffecc24 -/* MPU clock/reset/power mode control registers */ -REG_ARM_CKCTL: /* 16 bits */ - .word 0xfffece00 -REG_ARM_IDLECT2: /* 16 bits */ - .word 0xfffece08 -REG_ARM_RSTCT2: /* 16 bits */ - .word 0xfffece14 -REG_ARM_SYSST: /* 16 bits */ - .word 0xfffece18 -/* DPLL control registers */ -REG_DPLL1_CTL: /* 16 bits */ - .word 0xfffecf00 -/* identification code register */ -REG_IDCODE: /* 32 bits */ - .word 0xfffed404 - -/* Innovator specific */ -REG_FPGA_LED_DIGIT: /* 8 bits (not used on Innovator) */ - .word 0x08000003 -REG_FPGA_POWER: /* 8 bits */ - .word 0x08000005 -REG_FPGA_AUDIO: /* 8 bits (not used on Innovator) */ - .word 0x0800000c -REG_FPGA_DIP_SWITCH: /* 8 bits (not used on Innovator) */ - .word 0x0800000e - -VAL_COMP_MODE_CTRL_0: - .word 0x0000eaef -VAL_FUNC_MUX_CTRL_4: - .word 0x00000000 -VAL_FUNC_MUX_CTRL_5: - .word 0x00000000 -VAL_FUNC_MUX_CTRL_6: - .word 0x00000001 -VAL_FUNC_MUX_CTRL_7: - .word 0x00000000 -VAL_FUNC_MUX_CTRL_8: - .word 0x10001200 -VAL_FUNC_MUX_CTRL_9: - .word 0x01201012 -VAL_FUNC_MUX_CTRL_A: - .word 0x00000248 -VAL_FUNC_MUX_CTRL_B: - .word 0x00000248 -VAL_FUNC_MUX_CTRL_C: - .word 0x09000000 -VAL_FUNC_MUX_CTRL_D: - .word 0x00000000 -VAL_PULL_DWN_CTRL_0: - .word 0x11a10000 -VAL_PULL_DWN_CTRL_1: - .word 0x2e047fff -VAL_PULL_DWN_CTRL_2: - .word 0xffd603a6 -VAL_PULL_DWN_CTRL_3: - .word 0x00003e03 -VAL_VOLTAGE_CTRL_0: - .word 0x00000007 -VAL_TEST_DBG_CTRL_0: - /* See Errata 4.13, This works around a SRAM bug, for chips below ES2.5 . - * This slows down internal SRAM accesses. - */ - .word 0x00000007 -VAL_MOD_CONF_CTRL_0: - .word 0x0b000008 -VAL_ARM_CKCTL: - .word 0x010f -VAL_DPLL1_CTL: - .word 0x2710 -VAL_TC_EMIFS_CS1_CONFIG_PRELIM: - .word 0x00001149 -VAL_TC_EMIFS_CS2_CONFIG_PRELIM: - .word 0x00004158 -VAL_TC_EMIFS_CS0_CONFIG: - .word 0x002130b0 -VAL_TC_EMIFS_CS1_CONFIG: - .word 0x0000f559 -VAL_TC_EMIFS_CS2_CONFIG: - .word 0x000055f0 -VAL_TC_EMIFS_CS3_CONFIG: - .word 0x00003331 -VAL_TC_EMIFF_SDRAM_CONFIG: - .word 0x010290fc -VAL_TC_EMIFF_MRS: - .word 0x00000027 diff --git a/board/ti/omap1510inn/omap1510innovator.c b/board/ti/omap1510inn/omap1510innovator.c deleted file mode 100644 index a2a33a0..0000000 --- a/board/ti/omap1510inn/omap1510innovator.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger mgroeger@sysgo.de - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, d.mueller@elsoft.ch - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta Kshitij@ti.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> - -DECLARE_GLOBAL_DATA_PTR; - -static void flash__init (void); -static void ether__init (void); - -static inline void delay (unsigned long loops) -{ - __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0" (loops)); -} - -/* - * Miscellaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* arch number of OMAP 1510-Board */ - gd->bd->bi_arch_number = MACH_TYPE_OMAP_INNOVATOR; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x10000100; - -/* kk - this speeds up your boot a quite a bit. However to make it - * work, you need make sure your kernel startup flush bug is fixed. - * ... rkw ... - */ - icache_enable (); - - flash__init (); - ether__init (); - return 0; -} - - -int misc_init_r (void) -{ - /* volatile ushort *gdir = (ushort *) (GPIO_DIR_CONTROL_REG); */ - /* volatile ushort *mdir = (ushort *) (MPUIO_DIR_CONTROL_REG); */ - - /* setup gpio direction to match board (no floats!) */ - /**gdir = 0xCFF9; */ - /**mdir = 0x103F; */ - - return (0); -} - -/****************************** - Routine: - Description: -******************************/ -static void flash__init (void) -{ -#define CS0_CHIP_SELECT_REG 0xfffecc10 -#define CS3_CHIP_SELECT_REG 0xfffecc1c -#define EMIFS_GlB_Config_REG 0xfffecc0c - - { - unsigned int regval; - - regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG); - regval = regval | 0x0001; /* Turn off write protection for flash devices. */ - if (regval & 0x0002) { - regval = regval & 0xfffd; /* Swap CS0 and CS3 so that flash is visible at 0x0 and eeprom at 0x0c000000. */ - /* If, instead, you want to reference flash at 0x0c000000, then it seemed the following were necessary. */ - /* *((volatile unsigned int *)CS0_CHIP_SELECT_REG) = 0x202090; / * Overrides head.S setting of 0x212090 */ - /* *((volatile unsigned int *)CS3_CHIP_SELECT_REG) = 0x202090; / * Let's flash chips be fully functional. */ - } - *((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval; - } -} - - -/****************************** - Routine: - Description: -******************************/ -static void ether__init (void) -{ -#define ETH_CONTROL_REG 0x0800000b - /* take the Ethernet controller out of reset and wait - * for the EEPROM load to complete. - */ - *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01; - udelay (3); -} - - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return 0; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_LAN91C96 - rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); -#endif - return rc; -} -#endif diff --git a/boards.cfg b/boards.cfg index dbd8479..af08622 100644 --- a/boards.cfg +++ b/boards.cfg @@ -1186,7 +1186,6 @@ Active sparc leon3 - gaisler - Active x86 x86 coreboot chromebook-x86 coreboot coreboot-x86 coreboot:SYS_TEXT_BASE=0x01110000 - Orphan arm arm1136 mx31 - imx31_phycore imx31_phycore_eet imx31_phycore:IMX31_PHYCORE_EET (resigned) Guennadi Liakhovetski g.liakhovetski@gmx.de Orphan arm arm1136 mx31 freescale - mx31ads - (resigned) Guennadi Liakhovetski g.liakhovetski@gmx.de -Orphan arm arm925t - ti - omap1510inn - Kshitij Gupta kshitij@ti.com Orphan arm pxa - - - lubbock - (dead address) Kyle Harris kharris@nexus-tech.net Orphan powerpc 74xx_7xx - - evb64260 EVB64260 EVB64260 - Orphan powerpc 74xx_7xx - - evb64260 EVB64260_750CX EVB64260 Eran Man eran@nbase.co.il diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 87b1dfe..0f9a486 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,7 +11,8 @@ easily if here is something they might want to dig for...
Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= -CANBT powerpc 405CR - - Matthias Fuchs matthias.fuchs@esd.eu +omap1510inn arm arm925t - - Kshitij Gupta kshitij@ti.com +CANBT powerpc 405CR fb8f4fd 2013-08-07 Matthias Fuchs matthias.fuchs@esd.eu Alaska8220 powerpc mpc8220 d6ed322 2013-05-11 Yukon8220 powerpc mpc8220 d6ed322 2013-05-11 sorcery powerpc mpc8220 d6ed322 2013-05-11 diff --git a/include/arm925t.h b/include/arm925t.h deleted file mode 100644 index 3d767b3..0000000 --- a/include/arm925t.h +++ /dev/null @@ -1,11 +0,0 @@ -/************************************************ - * NAME : arm925t.h - * Version : 23 June 2003 * - ************************************************/ - -#ifndef __ARM925T_H__ -#define __ARM925T_H__ - -void archflashwp(void *archdata, int wp); - -#endif /*__ARM925T_H__*/ diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h deleted file mode 100644 index 1a7e5c7..0000000 --- a/include/configs/omap1510inn.h +++ /dev/null @@ -1,166 +0,0 @@ -/* - * (C) Copyright 2003 - * Texas Instruments. - * Kshitij Gupta kshitij@ti.com - * Configuation settings for the TI OMAP Innovator board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM925T 1 /* This is an arm925t CPU */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP1510 1 /* which is in a 1510 (helen) */ -#define CONFIG_INNOVATOROMAP1510 1 /* a Innovator Board */ - -/* input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 12000000 /* the OMAP1510 Innovator has 12MHz input clock */ - -#define CONFIG_MISC_INIT_R - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ -/* -#define CONFIG_DRIVER_SMC9196 -#define CONFIG_SMC9196_BASE 0x08000300 -#define CONFIG_SMC9196_EXT_PHY -*/ -#define CONFIG_LAN91C96 -#define CONFIG_LAN91C96_BASE 0x08000300 -#define CONFIG_LAN91C96_EXT_PHY - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK (CONFIG_SYS_CLK_FREQ) /* can be 12M/32Khz or 48Mhz */ -#define CONFIG_SYS_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart on helen */ - -/* - * select serial console configuration - */ -#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on OMAP1510 Innovator */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH - - -#include <configs/omap1510.h> - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "console=ttyS0,115200n8 noinitrd root=/dev/nfs ip=bootp" -#define CONFIG_BOOTCOMMAND "bootp;tftp;bootm" -#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "OMAP1510 Innovator # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x12000000 /* 32 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */ - -/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1. - * This time is further subdivided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE /* use timer 1 */ -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define PHYS_SRAM 0x20000000 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define PHYS_FLASH_SIZE 0x01000000 /* 16MB */ -#define PHYS_FLASH_SECT_SIZE (128*1024) /* Size of a sector (128kB) */ -#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SECT_SIZE) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */ -#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE /* Reserve 1 sector */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE } - -/*----------------------------------------------------------------------- - * FLASH driver setup - */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */ -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -#define CONFIG_ENV_OFFSET ( CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN ) /* Environment after Monitor */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR PHYS_SRAM - -#endif /* __CONFIG_H */