u-boot reports a PCIE PLL lock error at boot time on Yucca board, and left PCIe nonfunctional. This is fixed by making u-boot function ppc4xx_init_pcie() to wait 300 uS after negating reset before the first check of PLL lock.
This fix touches only one file 4xx_pcie.c
Signed off by Rupjyoti Sarmah < rsarmah@amcc.com > from Applied Micro ----------------------------------------------------
diff --git a/u-boot-2009.06/cpu/ppc4xx/4xx_pcie.c b/u-boot-2009.06/cpu/ppc4xx/4xx_pcie.c old mode 100644 new mode 100755 index 07fbb0e..51a5fd2 --- a/u-boot-2009.06/cpu/ppc4xx/4xx_pcie.c +++ b/u-boot-2009.06/cpu/ppc4xx/4xx_pcie.c @@ -1,1171 +1,1179 @@
+/* + * (C) Copyright 2006 - 2008 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Roland Dreier rolandd@cisco.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +/* define DEBUG for debugging output (obviously ;-)) */ +#if 0 +#define DEBUG +#endif + +#include <common.h> +#include <pci.h> +#include <ppc4xx.h> +#include <asm/processor.h> +#include <asm-ppc/io.h> + +#if (defined(CONFIG_440SPE) || defined(CONFIG_405EX) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT)) && \ + defined(CONFIG_PCI) && !defined(CONFIG_PCI_DISABLE_PCIE) + +#include <asm/4xx_pcie.h> + +enum { + PTYPE_ENDPOINT = 0x0, + PTYPE_LEGACY_ENDPOINT = 0x1, + PTYPE_ROOT_PORT = 0x4, + + LNKW_X1 = 0x1, + LNKW_X4 = 0x4, + LNKW_X8 = 0x8 +}; + +static int validate_endpoint(struct pci_controller *hose) +{ + if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE0_CFGBASE) + return (is_end_point(0)); + else if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE1_CFGBASE) + return (is_end_point(1)); +#if CONFIG_SYS_PCIE_NR_PORTS > 2 + else if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE2_CFGBASE) + return (is_end_point(2)); +#endif + + return 0; +} + +static u8* pcie_get_base(struct pci_controller *hose, unsigned int devfn) +{ + u8 *base = (u8*)hose->cfg_data; + + /* use local configuration space for the first bus */ + if (PCI_BUS(devfn) == 0) { + if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE0_CFGBASE) + base = (u8*)CONFIG_SYS_PCIE0_XCFGBASE; + if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE1_CFGBASE) + base = (u8*)CONFIG_SYS_PCIE1_XCFGBASE; +#if CONFIG_SYS_PCIE_NR_PORTS > 2 + if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE2_CFGBASE) + base = (u8*)CONFIG_SYS_PCIE2_XCFGBASE; +#endif + } + + return base; +} + +static void pcie_dmer_disable(void) +{ + mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE), + mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) | GPL_DMER_MASK_DISA); + mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE), + mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) | GPL_DMER_MASK_DISA); +#if CONFIG_SYS_PCIE_NR_PORTS > 2 + mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE), + mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) | GPL_DMER_MASK_DISA); +#endif +} + +static void pcie_dmer_enable(void) +{ + mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE0_BASE), + mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) & ~GPL_DMER_MASK_DISA); + mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE1_BASE), + mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) & ~GPL_DMER_MASK_DISA); +#if CONFIG_SYS_PCIE_NR_PORTS > 2 + mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE2_BASE), + mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) & ~GPL_DMER_MASK_DISA); +#endif +} + +static int pcie_read_config(struct pci_controller *hose, unsigned int devfn, + int offset, int len, u32 *val) { + + u8 *address; + *val = 0; + + if (validate_endpoint(hose)) + return 0; /* No upstream config access */ + + /* + * Bus numbers are relative to hose->first_busno + */ + devfn -= PCI_BDF(hose->first_busno, 0, 0); + + /* + * NOTICE: configuration space ranges are currenlty mapped only for + * the first 16 buses, so such limit must be imposed. In case more + * buses are required the TLB settings in board/amcc/<board>/init.S + * need to be altered accordingly (one bus takes 1 MB of memory space). + */ + if (PCI_BUS(devfn) >= 16) + return 0; + + /* + * Only single device/single function is supported for the primary and + * secondary buses of the 440SPe host bridge. + */ + if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) && + ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1))) + return 0; + + address = pcie_get_base(hose, devfn); + offset += devfn << 4; + + /* + * Reading from configuration space of non-existing device can + * generate transaction errors. For the read duration we suppress + * assertion of machine check exceptions to avoid those. + */ + pcie_dmer_disable (); + + debug("%s: cfg_data=%08x offset=%08x\n", __func__, hose->cfg_data, offset); + switch (len) { + case 1: + *val = in_8(hose->cfg_data + offset); + break; + case 2: + *val = in_le16((u16 *)(hose->cfg_data + offset)); + break; + default: + *val = in_le32((u32*)(hose->cfg_data + offset)); + break; + } + + pcie_dmer_enable (); + + return 0; +} + +static int pcie_write_config(struct pci_controller *hose, unsigned int devfn, + int offset, int len, u32 val) { + + u8 *address; + + if (validate_endpoint(hose)) + return 0; /* No upstream config access */ + + /* + * Bus numbers are relative to hose->first_busno + */ + devfn -= PCI_BDF(hose->first_busno, 0, 0); + + /* + * Same constraints as in pcie_read_config(). + */ + if (PCI_BUS(devfn) >= 16) + return 0; + + if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) && + ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1))) + return 0; + + address = pcie_get_base(hose, devfn); + offset += devfn << 4; + + /* + * Suppress MCK exceptions, similar to pcie_read_config() + */ + pcie_dmer_disable (); + + switch (len) { + case 1: + out_8(hose->cfg_data + offset, val); + break; + case 2: + out_le16((u16 *)(hose->cfg_data + offset), val); + break; + default: + out_le32((u32 *)(hose->cfg_data + offset), val); + break; + } + + pcie_dmer_enable (); + + return 0; +} + +int pcie_read_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u8 *val) +{ + u32 v; + int rv; + + rv = pcie_read_config(hose, dev, offset, 1, &v); + *val = (u8)v; + return rv; +} + +int pcie_read_config_word(struct pci_controller *hose,pci_dev_t dev,int offset,u16 *val) +{ + u32 v; + int rv; + + rv = pcie_read_config(hose, dev, offset, 2, &v); + *val = (u16)v; + return rv; +} + +int pcie_read_config_dword(struct pci_controller *hose,pci_dev_t dev,int offset,u32 *val) +{ + u32 v; + int rv; + + rv = pcie_read_config(hose, dev, offset, 3, &v); + *val = (u32)v; + return rv; +} + +int pcie_write_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u8 val) +{ + return pcie_write_config(hose,(u32)dev,offset,1,val); +} + +int pcie_write_config_word(struct pci_controller *hose,pci_dev_t dev,int offset,u16 val) +{ + return pcie_write_config(hose,(u32)dev,offset,2,(u32 )val); +} + +int pcie_write_config_dword(struct pci_controller *hose,pci_dev_t dev,int offset,u32 val) +{ + return pcie_write_config(hose,(u32)dev,offset,3,(u32 )val); +} + +#if defined(CONFIG_440SPE) +static void ppc4xx_setup_utl(u32 port) { + + volatile void *utl_base = NULL; + + /* + * Map UTL registers + */ + switch (port) { + case 0: + mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c); + mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x20000000); + mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); + mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800); + break; + + case 1: + mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c); + mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x20001000); + mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); + mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800); + break; + + case 2: + mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c); + mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x20002000); + mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001); + mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800); + break; + } + utl_base = (unsigned int *)(CONFIG_SYS_PCIE_BASE + 0x1000 * port); + + /* + * Set buffer allocations and then assert VRB and TXE. + */ + out_be32(utl_base + PEUTL_OUTTR, 0x08000000); + out_be32(utl_base + PEUTL_INTR, 0x02000000); + out_be32(utl_base + PEUTL_OPDBSZ, 0x10000000); + out_be32(utl_base + PEUTL_PBBSZ, 0x53000000); + out_be32(utl_base + PEUTL_IPHBSZ, 0x08000000); + out_be32(utl_base + PEUTL_IPDBSZ, 0x10000000); + out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000); + out_be32(utl_base + PEUTL_PCTL, 0x80800066); +} + +static int check_error(void) +{ + u32 valPE0, valPE1, valPE2; + int err = 0; + + /* SDR0_PEGPLLLCT1 reset */ + if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000)) + printf("PCIE: SDR0_PEGPLLLCT1 reset error 0x%x\n", valPE0); + + valPE0 = SDR_READ(PESDR0_RCSSET); + valPE1 = SDR_READ(PESDR1_RCSSET); + valPE2 = SDR_READ(PESDR2_RCSSET); + + /* SDR0_PExRCSSET rstgu */ + if (!(valPE0 & 0x01000000) || + !(valPE1 & 0x01000000) || + !(valPE2 & 0x01000000)) { + printf("PCIE: SDR0_PExRCSSET rstgu error\n"); + err = -1; + } + + /* SDR0_PExRCSSET rstdl */ + if (!(valPE0 & 0x00010000) || + !(valPE1 & 0x00010000) || + !(valPE2 & 0x00010000)) { + printf("PCIE: SDR0_PExRCSSET rstdl error\n"); + err = -1; + } + + /* SDR0_PExRCSSET rstpyn */ + if ((valPE0 & 0x00001000) || + (valPE1 & 0x00001000) || + (valPE2 & 0x00001000)) { + printf("PCIE: SDR0_PExRCSSET rstpyn error\n"); + err = -1; + } + + /* SDR0_PExRCSSET hldplb */ + if ((valPE0 & 0x10000000) || + (valPE1 & 0x10000000) || + (valPE2 & 0x10000000)) { + printf("PCIE: SDR0_PExRCSSET hldplb error\n"); + err = -1; + } + + /* SDR0_PExRCSSET rdy */ + if ((valPE0 & 0x00100000) || + (valPE1 & 0x00100000) || + (valPE2 & 0x00100000)) { + printf("PCIE: SDR0_PExRCSSET rdy error\n"); + err = -1; + } + + /* SDR0_PExRCSSET shutdown */ + if ((valPE0 & 0x00000100) || + (valPE1 & 0x00000100) || + (valPE2 & 0x00000100)) { + printf("PCIE: SDR0_PExRCSSET shutdown error\n"); + err = -1; + } + return err; +} + +/* + * Initialize PCI Express core + */ +int ppc4xx_init_pcie(void) +{ + int time_out = 20; /* PCIe PLL lock retry count */ + + /* Set PLL clock receiver to LVPECL */ + SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28); + + if (check_error()) + { + printf("ERROR: ppc4xx_init_pcie(): PCIe setting reference clock receiver failed: PESDR0_PLLLCT1 = (0x%08x)\n", + SDR_READ(PESDR0_PLLLCT1)); + return -1; + } + + /* Did resistance calibration work? */ + if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000)) + { + printf("ERROR: ppc4xx_init_pcie(): PCIe resistance calibration failed (bit 15=0): PESDR0_PLLLCT2 = (0x%08x)\n", + SDR_READ(PESDR0_PLLLCT2)); + return -1; + } + + /* Take PCIe PLL out of reset, wait for lock */ + SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24)); + udelay(300); /* 300 uS is maximum time lock should take, per 440SPe user's manual */ + + while (time_out) { + if (!(SDR_READ(PESDR0_PLLLCT3) & 0x10000000)) { /* Read PLL lock status register PLLLCTS in user's manual */ + time_out--; + udelay(20); /* Wait 20 uS more if needed */ + } else + break; + } + if (!time_out) { + printf("ERROR: ppc4xx_init_pcie(): PCIe - PCIe PLL VCO output not locked to reference clock (bit 3=0): PESDR0_PLLLCTS = (0x%08x)\n", + SDR_READ(PESDR0_PLLLCT3)); + return -1; + } + return 0; +} +#endif + +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) +static void ppc4xx_setup_utl(u32 port) +{ + volatile void *utl_base = NULL; + + /* + * Map UTL registers at 0x0801_n000 (4K 0xfff mask) PEGPLn_REGMSK + */ + switch (port) { + case 0: + mtdcr(DCRN_PEGPL_REGBAH(PCIE0), U64_TO_U32_HIGH(CONFIG_SYS_PCIE0_UTLBASE)); + mtdcr(DCRN_PEGPL_REGBAL(PCIE0), U64_TO_U32_LOW(CONFIG_SYS_PCIE0_UTLBASE)); + mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* BAM 11100000=4KB */ + mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0); + break; + + case 1: + mtdcr(DCRN_PEGPL_REGBAH(PCIE1), U64_TO_U32_HIGH(CONFIG_SYS_PCIE0_UTLBASE)); + mtdcr(DCRN_PEGPL_REGBAL(PCIE1), U64_TO_U32_LOW(CONFIG_SYS_PCIE0_UTLBASE) + + 0x1000); + mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* BAM 11100000=4KB */ + mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0); + break; + } + utl_base = (unsigned int *)(CONFIG_SYS_PCIE_BASE + 0x1000 * port); + + /* + * Set buffer allocations and then assert VRB and TXE. + */ + out_be32(utl_base + PEUTL_PBCTL, 0x0800000c); /* PLBME, CRRE */ + out_be32(utl_base + PEUTL_OUTTR, 0x08000000); + out_be32(utl_base + PEUTL_INTR, 0x02000000); + out_be32(utl_base + PEUTL_OPDBSZ, 0x04000000); /* OPD = 512 Bytes */ + out_be32(utl_base + PEUTL_PBBSZ, 0x00000000); /* Max 512 Bytes */ + out_be32(utl_base + PEUTL_IPHBSZ, 0x02000000); + out_be32(utl_base + PEUTL_IPDBSZ, 0x04000000); /* IPD = 512 Bytes */ + out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000); + out_be32(utl_base + PEUTL_PCTL, 0x80800066); /* VRB,TXE,timeout=default */ +} + +/* + * TODO: double check PCI express SDR based on the latest user manual + * Some registers specified here no longer exist.. has to be + * updated based on the final EAS spec. + */ +static int check_error(void) +{ + u32 valPE0, valPE1; + int err = 0; + + valPE0 = SDR_READ(SDRN_PESDR_RCSSET(0)); + valPE1 = SDR_READ(SDRN_PESDR_RCSSET(1)); + + /* SDR0_PExRCSSET rstgu */ + if (!(valPE0 & PESDRx_RCSSET_RSTGU) || !(valPE1 & PESDRx_RCSSET_RSTGU)) { + printf("PCIE: SDR0_PExRCSSET rstgu error\n"); + err = -1; + } + + /* SDR0_PExRCSSET rstdl */ + if (!(valPE0 & PESDRx_RCSSET_RSTDL) || !(valPE1 & PESDRx_RCSSET_RSTDL)) { + printf("PCIE: SDR0_PExRCSSET rstdl error\n"); + err = -1; + } + + /* SDR0_PExRCSSET rstpyn */ + if ((valPE0 & PESDRx_RCSSET_RSTPYN) || (valPE1 & PESDRx_RCSSET_RSTPYN)) { + printf("PCIE: SDR0_PExRCSSET rstpyn error\n"); + err = -1; + } + + /* SDR0_PExRCSSET hldplb */ + if ((valPE0 & PESDRx_RCSSET_HLDPLB) || (valPE1 & PESDRx_RCSSET_HLDPLB)) { + printf("PCIE: SDR0_PExRCSSET hldplb error\n"); + err = -1; + } + + /* SDR0_PExRCSSET rdy */ + if ((valPE0 & PESDRx_RCSSET_RDY) || (valPE1 & PESDRx_RCSSET_RDY)) { + printf("PCIE: SDR0_PExRCSSET rdy error\n"); + err = -1; + } + + return err; +} + +/* + * Initialize PCI Express core as described in User Manual + * TODO: double check PE SDR PLL Register with the updated user manual. + */ +int ppc4xx_init_pcie(void) +{ + if (check_error()) + return -1; + + return 0; +} +#endif /* CONFIG_460EX */ + +#if defined(CONFIG_405EX) +static void ppc4xx_setup_utl(u32 port) +{ + u32 utl_base; + + /* + * Map UTL registers at 0xef4f_n000 (4K 0xfff mask) PEGPLn_REGMSK + */ + switch (port) { + case 0: + mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x00000000); + mtdcr(DCRN_PEGPL_REGBAL(PCIE0), CONFIG_SYS_PCIE0_UTLBASE); + mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* 4k region, valid */ + mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0); + break; + + case 1: + mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x00000000); + mtdcr(DCRN_PEGPL_REGBAL(PCIE1), CONFIG_SYS_PCIE1_UTLBASE); + mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* 4k region, valid */ + mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0); + + break; + } + utl_base = (port==0) ? CONFIG_SYS_PCIE0_UTLBASE : CONFIG_SYS_PCIE1_UTLBASE; + + /* + * Set buffer allocations and then assert VRB and TXE. + */ + out_be32((u32 *)(utl_base + PEUTL_OUTTR), 0x02000000); + out_be32((u32 *)(utl_base + PEUTL_INTR), 0x02000000); + out_be32((u32 *)(utl_base + PEUTL_OPDBSZ), 0x04000000); + out_be32((u32 *)(utl_base + PEUTL_PBBSZ), 0x21000000); + out_be32((u32 *)(utl_base + PEUTL_IPHBSZ), 0x02000000); + out_be32((u32 *)(utl_base + PEUTL_IPDBSZ), 0x04000000); + out_be32((u32 *)(utl_base + PEUTL_RCIRQEN), 0x00f00000); + out_be32((u32 *)(utl_base + PEUTL_PCTL), 0x80800066); + + out_be32((u32 *)(utl_base + PEUTL_PBCTL), 0x0800000c); + out_be32((u32 *)(utl_base + PEUTL_RCSTA), + in_be32((u32 *)(utl_base + PEUTL_RCSTA)) | 0x000040000); +} + +int ppc4xx_init_pcie(void) +{ + /* + * Nothing to do on 405EX + */ + return 0; +} +#endif /* CONFIG_405EX */ + +/* + * Board-specific pcie initialization + * Platform code can reimplement ppc4xx_init_pcie_port_hw() if needed + */ + +/* + * Initialize various parts of the PCI Express core for our port: + * + * - Set as a root port and enable max width + * (PXIE0 -> X8, PCIE1 and PCIE2 -> X4). + * - Set up UTL configuration. + * - Increase SERDES drive strength to levels suggested by AMCC. + * - De-assert RSTPYN, RSTDL and RSTGU. + * + * NOTICE for 440SPE revB chip: PESDRn_UTLSET2 is not set - we leave it + * with default setting 0x11310000. The register has new fields, + * PESDRn_UTLSET2[LKINE] in particular: clearing it leads to PCIE core + * hang. + */ +#if defined(CONFIG_440SPE) +int __ppc4xx_init_pcie_port_hw(int port, int rootport) +{ + u32 val = 1 << 24; + u32 utlset1; + + if (rootport) { + val = PTYPE_ROOT_PORT << 20; + utlset1 = 0x21222222; + } else { + val = PTYPE_LEGACY_ENDPOINT << 20; + utlset1 = 0x20222222; + } + + if (port == 0) + val |= LNKW_X8 << 12; + else + val |= LNKW_X4 << 12; + + SDR_WRITE(SDRN_PESDR_DLPSET(port), val); + SDR_WRITE(SDRN_PESDR_UTLSET1(port), utlset1); + if (!ppc440spe_revB()) + SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x11000000); + SDR_WRITE(SDRN_PESDR_HSSL0SET1(port), 0x35000000); + SDR_WRITE(SDRN_PESDR_HSSL1SET1(port), 0x35000000); + SDR_WRITE(SDRN_PESDR_HSSL2SET1(port), 0x35000000); + SDR_WRITE(SDRN_PESDR_HSSL3SET1(port), 0x35000000); + if (port == 0) { + SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000); + } + SDR_WRITE(SDRN_PESDR_RCSSET(port), (SDR_READ(SDRN_PESDR_RCSSET(port)) & + ~(1 << 24 | 1 << 16)) | 1 << 12); + + return 0; +} +#endif /* CONFIG_440SPE */ + +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) +int __ppc4xx_init_pcie_port_hw(int port, int rootport) +{ + u32 val; + u32 utlset1; + + if (rootport) + val = PTYPE_ROOT_PORT << 20; + else + val = PTYPE_LEGACY_ENDPOINT << 20; + + if (port == 0) { + val |= LNKW_X1 << 12; + utlset1 = 0x20000000; + } else { + val |= LNKW_X4 << 12; + utlset1 = 0x20101101; + } + + SDR_WRITE(SDRN_PESDR_DLPSET(port), val); + SDR_WRITE(SDRN_PESDR_UTLSET1(port), utlset1); + SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x01210000); + + switch (port) { + case 0: + SDR_WRITE(PESDR0_L0CDRCTL, 0x00003230); + SDR_WRITE(PESDR0_L0DRV, 0x00000130); + SDR_WRITE(PESDR0_L0CLK, 0x00000006); + + SDR_WRITE(PESDR0_PHY_CTL_RST,0x10000000); + break; + + case 1: + SDR_WRITE(PESDR1_L0CDRCTL, 0x00003230); + SDR_WRITE(PESDR1_L1CDRCTL, 0x00003230); + SDR_WRITE(PESDR1_L2CDRCTL, 0x00003230); + SDR_WRITE(PESDR1_L3CDRCTL, 0x00003230); + SDR_WRITE(PESDR1_L0DRV, 0x00000130); + SDR_WRITE(PESDR1_L1DRV, 0x00000130); + SDR_WRITE(PESDR1_L2DRV, 0x00000130); + SDR_WRITE(PESDR1_L3DRV, 0x00000130); + SDR_WRITE(PESDR1_L0CLK, 0x00000006); + SDR_WRITE(PESDR1_L1CLK, 0x00000006); + SDR_WRITE(PESDR1_L2CLK, 0x00000006); + SDR_WRITE(PESDR1_L3CLK, 0x00000006); + + SDR_WRITE(PESDR1_PHY_CTL_RST,0x10000000); + break; + } + + SDR_WRITE(SDRN_PESDR_RCSSET(port), SDR_READ(SDRN_PESDR_RCSSET(port)) | + (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN)); + + /* Poll for PHY reset */ + switch (port) { + case 0: + while (!(SDR_READ(PESDR0_RSTSTA) & 0x1)) + udelay(10); + break; + case 1: + while (!(SDR_READ(PESDR1_RSTSTA) & 0x1)) + udelay(10); + break; + } + + SDR_WRITE(SDRN_PESDR_RCSSET(port), + (SDR_READ(SDRN_PESDR_RCSSET(port)) & + ~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) | + PESDRx_RCSSET_RSTPYN); + + return 0; +} +#endif /* CONFIG_440SPE */ + +#if defined(CONFIG_405EX) +int __ppc4xx_init_pcie_port_hw(int port, int rootport) +{ + u32 val; + + if (rootport) + val = 0x00401000; + else + val = 0x00101000; + + SDR_WRITE(SDRN_PESDR_DLPSET(port), val); + SDR_WRITE(SDRN_PESDR_UTLSET1(port), 0x00000000); + SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x01010000); + SDR_WRITE(SDRN_PESDR_PHYSET1(port), 0x720F0000); + SDR_WRITE(SDRN_PESDR_PHYSET2(port), 0x70600003); + + /* Assert the PE0_PHY reset */ + SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01010000); + udelay(1000); + + /* deassert the PE0_hotreset */ + if (is_end_point(port)) + SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01111000); + else + SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01101000); + + /* poll for phy !reset */ + while (!(SDR_READ(SDRN_PESDR_PHYSTA(port)) & 0x00001000)) + ; + + /* deassert the PE0_gpl_utl_reset */ + SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x00101000); + + if (port == 0) + mtdcr(DCRN_PEGPL_CFG(PCIE0), 0x10000000); /* guarded on */ + else + mtdcr(DCRN_PEGPL_CFG(PCIE1), 0x10000000); /* guarded on */ + + return 0; +} +#endif /* CONFIG_405EX */ + +int ppc4xx_init_pcie_port_hw(int port, int rootport) +__attribute__((weak, alias("__ppc4xx_init_pcie_port_hw"))); + +/* + * We map PCI Express configuration access into the 512MB regions + * + * NOTICE: revB is very strict about PLB real addressess and ranges to + * be mapped for config space; it seems to only work with d_nnnn_nnnn + * range (hangs the core upon config transaction attempts when set + * otherwise) while revA uses c_nnnn_nnnn. + * + * For 440SPe revA: + * PCIE0: 0xc_4000_0000 + * PCIE1: 0xc_8000_0000 + * PCIE2: 0xc_c000_0000 + * + * For 440SPe revB: + * PCIE0: 0xd_0000_0000 + * PCIE1: 0xd_2000_0000 + * PCIE2: 0xd_4000_0000 + * + * For 405EX: + * PCIE0: 0xa000_0000 + * PCIE1: 0xc000_0000 + * + * For 460EX/GT: + * PCIE0: 0xd_0000_0000 + * PCIE1: 0xd_2000_0000 + */ +static inline u64 ppc4xx_get_cfgaddr(int port) +{ +#if defined(CONFIG_405EX) + if (port == 0) + return (u64)CONFIG_SYS_PCIE0_CFGBASE; + else + return (u64)CONFIG_SYS_PCIE1_CFGBASE; +#endif +#if defined(CONFIG_440SPE) + if (ppc440spe_revB()) { + switch (port) { + default: /* to satisfy compiler */ + case 0: + return 0x0000000d00000000ULL; + case 1: + return 0x0000000d20000000ULL; + case 2: + return 0x0000000d40000000ULL; + } + } else { + switch (port) { + default: /* to satisfy compiler */ + case 0: + return 0x0000000c40000000ULL; + case 1: + return 0x0000000c80000000ULL; + case 2: + return 0x0000000cc0000000ULL; + } + } +#endif +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) + if (port == 0) + return 0x0000000d00000000ULL; + else + return 0x0000000d20000000ULL; +#endif +} + +/* + * 4xx boards as end point and root point setup + * and + * testing inbound and out bound windows + * + * 4xx boards can be plugged into another 4xx boards or you can get PCI-E + * cable which can be used to setup loop back from one port to another port. + * Please rememeber that unless there is a endpoint plugged in to root port it + * will not initialize. It is the same in case of endpoint , unless there is + * root port attached it will not initialize. + * + * In this release of software all the PCI-E ports are configured as either + * endpoint or rootpoint.In future we will have support for selective ports + * setup as endpoint and root point in single board. + * + * Once your board came up as root point , you can verify by reading + * /proc/bus/pci/devices. Where you can see the configuration registers + * of end point device attached to the port. + * + * Enpoint cofiguration can be verified by connecting 4xx board to any + * host or another 4xx board. Then try to scan the device. In case of + * linux use "lspci" or appripriate os command. + * + * How do I verify the inbound and out bound windows ? (4xx to 4xx) + * in this configuration inbound and outbound windows are setup to access + * sram memroy area. SRAM is at 0x4 0000 0000 , on PLB bus. This address + * is mapped at 0x90000000. From u-boot prompt write data 0xb000 0000, + * This is waere your POM(PLB out bound memory window) mapped. then + * read the data from other 4xx board's u-boot prompt at address + * 0x9000 0000(SRAM). Data should match. + * In case of inbound , write data to u-boot command prompt at 0xb000 0000 + * which is mapped to 0x4 0000 0000. Now on rootpoint yucca u-boot prompt check + * data at 0x9000 0000(SRAM).Data should match. + */ +int ppc4xx_init_pcie_port(int port, int rootport) +{ + static int core_init; + volatile u32 val = 0; + int attempts; + u64 addr; + u32 low, high; + + if (!core_init) { + if (ppc4xx_init_pcie()) + return -1; + ++core_init; + } + + /* + * Initialize various parts of the PCI Express core for our port + */ + ppc4xx_init_pcie_port_hw(port, rootport); + + /* + * Notice: the following delay has critical impact on device + * initialization - if too short (<50ms) the link doesn't get up. + */ + mdelay(100); + + val = SDR_READ(SDRN_PESDR_RCSSTS(port)); + if (val & (1 << 20)) { + printf("PCIE%d: PGRST failed %08x\n", port, val); + return -1; + } + + /* + * Verify link is up + */ + val = SDR_READ(SDRN_PESDR_LOOP(port)); + if (!(val & 0x00001000)) { + printf("PCIE%d: link is not up.\n", port); + return -1; + } + + /* + * Setup UTL registers - but only on revA! + * We use default settings for revB chip. + */ + if (!ppc440spe_revB()) + ppc4xx_setup_utl(port); + + /* + * We map PCI Express configuration access into the 512MB regions + */ + addr = ppc4xx_get_cfgaddr(port); + low = U64_TO_U32_LOW(addr); + high = U64_TO_U32_HIGH(addr); + + switch (port) { + case 0: + mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), high); + mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), low); + mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */ + break; + case 1: + mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), high); + mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), low); + mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */ + break; +#if CONFIG_SYS_PCIE_NR_PORTS > 2 + case 2: + mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), high); + mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), low); + mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */ + break; +#endif + } + + /* + * Check for VC0 active and assert RDY. + */ + attempts = 10; + while(!(SDR_READ(SDRN_PESDR_RCSSTS(port)) & (1 << 16))) { + if (!(attempts--)) { + printf("PCIE%d: VC0 not active\n", port); + return -1; + } + mdelay(1000); + } + SDR_WRITE(SDRN_PESDR_RCSSET(port), + SDR_READ(SDRN_PESDR_RCSSET(port)) | 1 << 20); + mdelay(100); + + return 0; +} + +int ppc4xx_init_pcie_rootport(int port) +{ + return ppc4xx_init_pcie_port(port, 1); +} + +int ppc4xx_init_pcie_endport(int port) +{ + return ppc4xx_init_pcie_port(port, 0); +} + +void ppc4xx_setup_pcie_rootpoint(struct pci_controller *hose, int port) +{ + volatile void *mbase = NULL; + volatile void *rmbase = NULL; + + pci_set_ops(hose, + pcie_read_config_byte, + pcie_read_config_word, + pcie_read_config_dword, + pcie_write_config_byte, + pcie_write_config_word, + pcie_write_config_dword); + + switch (port) { + case 0: + mbase = (u32 *)CONFIG_SYS_PCIE0_XCFGBASE; + rmbase = (u32 *)CONFIG_SYS_PCIE0_CFGBASE; + hose->cfg_data = (u8 *)CONFIG_SYS_PCIE0_CFGBASE; + break; + case 1: + mbase = (u32 *)CONFIG_SYS_PCIE1_XCFGBASE; + rmbase = (u32 *)CONFIG_SYS_PCIE1_CFGBASE; + hose->cfg_data = (u8 *)CONFIG_SYS_PCIE1_CFGBASE; + break; +#if CONFIG_SYS_PCIE_NR_PORTS > 2 + case 2: + mbase = (u32 *)CONFIG_SYS_PCIE2_XCFGBASE; + rmbase = (u32 *)CONFIG_SYS_PCIE2_CFGBASE; + hose->cfg_data = (u8 *)CONFIG_SYS_PCIE2_CFGBASE; + break; +#endif + } + + /* + * Set bus numbers on our root port + */ + out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0); + out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1); + out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1); + + /* + * Set up outbound translation to hose->mem_space from PLB + * addresses at an offset of 0xd_0000_0000. We set the low + * bits of the mask to 11 to turn off splitting into 8 + * subregions and to enable the outbound translation. + */ + out_le32(mbase + PECFG_POM0LAH, 0x00000000); + out_le32(mbase + PECFG_POM0LAL, CONFIG_SYS_PCIE_MEMBASE + + port * CONFIG_SYS_PCIE_MEMSIZE); + debug("PECFG_POM0LA=%08x.%08x\n", in_le32(mbase + PECFG_POM0LAH), + in_le32(mbase + PECFG_POM0LAL)); + + switch (port) { + case 0: + mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CONFIG_SYS_PCIE_ADDR_HIGH); + mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CONFIG_SYS_PCIE_MEMBASE + + port * CONFIG_SYS_PCIE_MEMSIZE); + mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff); + mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0), + ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3); + debug("0:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n", + mfdcr(DCRN_PEGPL_OMR1BAH(PCIE0)), + mfdcr(DCRN_PEGPL_OMR1BAL(PCIE0)), + mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE0)), + mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE0))); + break; + case 1: + mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CONFIG_SYS_PCIE_ADDR_HIGH); + mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CONFIG_SYS_PCIE_MEMBASE + + port * CONFIG_SYS_PCIE_MEMSIZE); + mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff); + mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1), + ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3); + debug("1:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n", + mfdcr(DCRN_PEGPL_OMR1BAH(PCIE1)), + mfdcr(DCRN_PEGPL_OMR1BAL(PCIE1)), + mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE1)), + mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE1))); + break; +#if CONFIG_SYS_PCIE_NR_PORTS > 2 + case 2: + mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CONFIG_SYS_PCIE_ADDR_HIGH); + mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CONFIG_SYS_PCIE_MEMBASE + + port * CONFIG_SYS_PCIE_MEMSIZE); + mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff); + mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2), + ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3); + debug("2:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n", + mfdcr(DCRN_PEGPL_OMR1BAH(PCIE2)), + mfdcr(DCRN_PEGPL_OMR1BAL(PCIE2)), + mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE2)), + mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE2))); + break; +#endif + } + + /* Set up 4GB inbound memory window at 0 */ + out_le32(mbase + PCI_BASE_ADDRESS_0, 0); + out_le32(mbase + PCI_BASE_ADDRESS_1, 0); + out_le32(mbase + PECFG_BAR0HMPA, 0x7ffffff); + out_le32(mbase + PECFG_BAR0LMPA, 0); + + out_le32(mbase + PECFG_PIM01SAH, 0xffff0000); + out_le32(mbase + PECFG_PIM01SAL, 0x00000000); + out_le32(mbase + PECFG_PIM0LAL, 0); + out_le32(mbase + PECFG_PIM0LAH, 0); + out_le32(mbase + PECFG_PIM1LAL, 0x00000000); + out_le32(mbase + PECFG_PIM1LAH, 0x00000004); + out_le32(mbase + PECFG_PIMEN, 0x1); + + /* Enable I/O, Mem, and Busmaster cycles */ + out_le16((u16 *)(mbase + PCI_COMMAND), + in_le16((u16 *)(mbase + PCI_COMMAND)) | + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + + /* Set Device and Vendor Id */ + out_le16(mbase + 0x200, 0xaaa0 + port); + out_le16(mbase + 0x202, 0xbed0 + port); + + /* Set Class Code to PCI-PCI bridge and Revision Id to 1 */ + out_le32(mbase + 0x208, 0x06040001); + + printf("PCIE%d: successfully set as root-complex\n", port); +} + +int ppc4xx_setup_pcie_endpoint(struct pci_controller *hose, int port) +{ + volatile void *mbase = NULL; + int attempts = 0; + + pci_set_ops(hose, + pcie_read_config_byte, + pcie_read_config_word, + pcie_read_config_dword, + pcie_write_config_byte, + pcie_write_config_word, + pcie_write_config_dword); + + switch (port) { + case 0: + mbase = (u32 *)CONFIG_SYS_PCIE0_XCFGBASE; + hose->cfg_data = (u8 *)CONFIG_SYS_PCIE0_CFGBASE; + break; + case 1: + mbase = (u32 *)CONFIG_SYS_PCIE1_XCFGBASE; + hose->cfg_data = (u8 *)CONFIG_SYS_PCIE1_CFGBASE; + break; +#if defined(CONFIG_SYS_PCIE2_CFGBASE) + case 2: + mbase = (u32 *)CONFIG_SYS_PCIE2_XCFGBASE; + hose->cfg_data = (u8 *)CONFIG_SYS_PCIE2_CFGBASE; + break; +#endif + } + + /* + * Set up outbound translation to hose->mem_space from PLB + * addresses at an offset of 0xd_0000_0000. We set the low + * bits of the mask to 11 to turn off splitting into 8 + * subregions and to enable the outbound translation. + */ + out_le32(mbase + PECFG_POM0LAH, 0x00001ff8); + out_le32(mbase + PECFG_POM0LAL, 0x00001000); + + switch (port) { + case 0: + mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CONFIG_SYS_PCIE_ADDR_HIGH); + mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CONFIG_SYS_PCIE_MEMBASE + + port * CONFIG_SYS_PCIE_MEMSIZE); + mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff); + mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0), + ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3); + break; + case 1: + mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CONFIG_SYS_PCIE_ADDR_HIGH); + mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CONFIG_SYS_PCIE_MEMBASE + + port * CONFIG_SYS_PCIE_MEMSIZE); + mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff); + mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1), + ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3); + break; +#if CONFIG_SYS_PCIE_NR_PORTS > 2 + case 2: + mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CONFIG_SYS_PCIE_ADDR_HIGH); + mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CONFIG_SYS_PCIE_MEMBASE + + port * CONFIG_SYS_PCIE_MEMSIZE); + mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff); + mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2), + ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3); + break; +#endif + } + + /* Set up 64MB inbound memory window at 0 */ + out_le32(mbase + PCI_BASE_ADDRESS_0, 0); + out_le32(mbase + PCI_BASE_ADDRESS_1, 0); + + out_le32(mbase + PECFG_PIM01SAH, 0xffffffff); + out_le32(mbase + PECFG_PIM01SAL, 0xfc000000); + + /* Setup BAR0 */ + out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffff); + out_le32(mbase + PECFG_BAR0LMPA, 0xfc000000 | PCI_BASE_ADDRESS_MEM_TYPE_64); + + /* Disable BAR1 & BAR2 */ + out_le32(mbase + PECFG_BAR1MPA, 0); + out_le32(mbase + PECFG_BAR2HMPA, 0); + out_le32(mbase + PECFG_BAR2LMPA, 0); + + out_le32(mbase + PECFG_PIM0LAL, U64_TO_U32_LOW(CONFIG_SYS_PCIE_INBOUND_BASE)); + out_le32(mbase + PECFG_PIM0LAH, U64_TO_U32_HIGH(CONFIG_SYS_PCIE_INBOUND_BASE)); + out_le32(mbase + PECFG_PIMEN, 0x1); + + /* Enable I/O, Mem, and Busmaster cycles */ + out_le16((u16 *)(mbase + PCI_COMMAND), + in_le16((u16 *)(mbase + PCI_COMMAND)) | + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + out_le16(mbase + 0x200, 0xcaad); /* Setting vendor ID */ + out_le16(mbase + 0x202, 0xfeed); /* Setting device ID */ + + /* Set Class Code to Processor/PPC */ + out_le32(mbase + 0x208, 0x0b200001); + + attempts = 10; + while(!(SDR_READ(SDRN_PESDR_RCSSTS(port)) & (1 << 8))) { + if (!(attempts--)) { + printf("PCIE%d: BME not active\n", port); + return -1; + } + mdelay(1000); + } + + printf("PCIE%d: successfully set as endpoint\n", port); + + return 0; +} +#endif /* CONFIG_440SPE && CONFIG_PCI */