Re: [PATCH 0/4] Adding support to load secure firmware for HS devices

On Tue, May 21, 2024 at 04:26:44PM +0530, Udit Kumar wrote:

Some use case needs rproc firmware to be loaded at u-boot stage, using following commands at u-boot shell, firmware could be loaded

=> setenv dorprocboot 1 => run boot_rprocs

For Secure devices, secure version of rproc firmware should be loaded, which is appended by sec keyword[0]. but currently non-secure firmware is loaded even for secure devices. So adding support for loading secure firmware on Secured devices.

Are you Cc'ing random people with this? Please don't do it.