On Sat, Jan 25, 2020 at 05:52:50PM +0530, Amit Singh Tomar wrote:
Devices like uart and clk are needed to be enabled before relocation. This patch adds u-boot.dtsi file that mark these device as dm-pre-reloc.
Signed-off-by: Amit Singh Tomar amittomer25@gmail.com
Patch subject should mention dtsi not dts and also the prefix should be arm: dts. With that,
Reviewed-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org
Thanks, Mani
Changes since v2:
- Newly added patch, not there in v2/v1.
arch/arm/dts/s900-u-boot.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 arch/arm/dts/s900-u-boot.dtsi
diff --git a/arch/arm/dts/s900-u-boot.dtsi b/arch/arm/dts/s900-u-boot.dtsi new file mode 100644 index 0000000..a95f2cc --- /dev/null +++ b/arch/arm/dts/s900-u-boot.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
- */
+/{
- soc {
u-boot,dm-pre-reloc;
Ignore my comment about this change in previous patch.
- };
+};
+&uart5 {
- u-boot,dm-pre-reloc;
+};
+&cmu {
- u-boot,dm-pre-reloc;
+};
2.7.4