On Tue, Apr 2, 2013 at 10:38 AM, Adnan Ali adnan.ali@codethink.co.uk wrote:
On 02/04/13 16:19, Robert Nelson wrote:
On Tue, Apr 2, 2013 at 9:17 AM, Adnan Ali adnan.ali@codethink.co.uk wrote:
Enable btrfs support in mx53loco config
Signed-off-by: Adnan Ali adnan.ali@codethink.co.uk
include/configs/mx53loco.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index a4b610f..62e9a76 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -56,6 +56,8 @@ #define CONFIG_GENERIC_MMC #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT2 +#define CONFIG_CMD_BTR +#define CONFIG_CMD_FS_GENERIC #define CONFIG_DOS_PARTITION
/* Eth Configs */ @@ -128,7 +130,7 @@ "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \ "mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot}\0" \ "loadbootscript=" \
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}${script};\0" \
"btrload mmc ${mmcdev}:${mmcpart} ${loadaddr}${script};\0" \
Instead of changing this to btrload for everyone, wouldn't it make more sense to use the generic "load" command? As your already setting "CONFIG_CMD_FS_GENERIC"
Well idea of adding that was to enable btrfs and to show its associated commands. Yes you can use generic 'load' command. Defaults was using fatload so i change it to btrload.
That's perfectly fine for showing the btrfs command's as an RFC patch, but if this was heading for mainline as-is, it would be nice to use the "load" command instead of moving from one partition format that's been default for a couple years to a new format with less users. (not that I don't like the btrfs format. ;) as i've been running it on a few omap boards for a couple years now..)
Regards,