Current spl_board_init is mostly specific to puma-rk3399 target and in other words it cannot be required or useful for other rk3399 boards.
Some boards require their custom initialization to be part of spl_board_init like roc-rk3399-pc require leds setup, environments.
So, this patch handles all these possible scenarios. Add rk_spl_board_init as __weak so that boards that require their own custom initialization can be defined on their board file.
Signed-off-by: Jagan Teki jagan@amarulasolutions.com Tested-by: Suniel Mahesh sunil@amarulasolutions.com --- Changes for v3: - new patch
arch/arm/mach-rockchip/rk3399/rk3399.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c index 4fda93b152..681f80f339 100644 --- a/arch/arm/mach-rockchip/rk3399/rk3399.c +++ b/arch/arm/mach-rockchip/rk3399/rk3399.c @@ -241,7 +241,7 @@ static void rk3399_force_power_on_reset(void) } #endif
-void spl_board_init(void) +__weak void rk_spl_board_init(void) { #if defined(SPL_GPIO_SUPPORT) struct rockchip_cru *cru = rockchip_get_cru(); @@ -274,4 +274,11 @@ void spl_board_init(void) debug("%s: Cannot enable boot on regulator\n", __func__); #endif } + +void spl_board_init(void) +{ + /* board specific spl init */ + rk_spl_board_init(); +} + #endif